ACS722LLCTR-05AB-T vs ACS723LLCTR-20AU-T

Dieser detaillierte Vergleich von ACS722LLCTR-05AB-T und ACS723LLCTR-20AU-T bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ACS723LLCTR-20AU-T and ACS722LLCTR-05AB-T are not functionally interchangeable. They differ in current sensing range, output signal type, and package construction, requiring circuit redesign and validation before any substitution can be considered.

Different current range Different output type Different package type Different sensitivity

Parts at a glance

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ACS723LLCTR-20AU-T ACS722LLCTR-05AB-T Why it matters
Current Sensing Range ±20 A ±5 A Defines the maximum measurable current; a 20 A sensor cannot be substituted where a 5 A full-scale is required for resolution, and vice versa.
Sensitivity 100 mV/A 400 mV/A Determines output voltage per amp of sensed current; different sensitivity changes the ADC scaling and overall measurement resolution.
Supply Voltage 4.5 V to 5.5 V 3.0 V to 3.6 V The two parts operate on different rails (5 V vs 3.3 V), so they are not pin-compatible in a given system without level shifting or a rail change.
Output Type Analog voltage Analog voltage Both provide a ratiometric analog output, but the different sensitivity and supply mean the output swing and offset differ.
Isolation Voltage 2.1 kVrms 2.1 kVrms Galvanic isolation rating is identical, so both meet the same safety isolation requirement for high-side sensing.
Bandwidth 80 kHz 80 kHz Identical bandwidth means both can track similar transient currents, so bandwidth is not a differentiator for substitution.
Package 8-lead SOIC 8-lead SOIC Same footprint and pinout allow drop-in PCB compatibility, simplifying substitution if electrical specs are acceptable.
Operating Temperature Range -40 °C to 150 °C -40 °C to 150 °C Identical temperature range means both are suitable for the same industrial and automotive thermal environments.
Accuracy ±3% typical ±3% typical Similar accuracy means measurement error is comparable, so accuracy alone does not prevent substitution.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ACS722LLCTR-05AB-T ACS723LLCTR-20AU-T
Part Status Active Active
For Measuring AC/DC AC/DC
Sensor Type Hall Effect, Open Loop Hall Effect, Open Loop
Current - Sensing 5A 20A
Number of Channels 1 1
Output Ratiometric, Voltage Ratiometric, Voltage
Sensitivity 264mV/A 200mv/A
Frequency DC ~ 80kHz DC ~ 80kHz
Linearity ±1% ±1%
Accuracy ±3% ±3%
Voltage - Supply 3V ~ 3.6V 5V
Response Time 5µs 5µs
Current - Supply (Max) 12mA 14mA
Operating Temperature -40°C ~ 150°C -40°C ~ 150°C
Polarization Bidirectional Unidirectional
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the primary differences between the ACS723LLCTR-20AU-T and the ACS722LLCTR-05AB-T?

The ACS723LLCTR-20AU-T is a 20 A unidirectional current sensor with an analog output, while the ACS722LLCTR-05AB-T is a 5 A bidirectional current sensor with a digital output. They differ in current range, directionality, output type, and sensitivity.

Are the ACS723LLCTR-20AU-T and ACS722LLCTR-05AB-T pin-to-pin compatible?

No. The ACS723LLCTR-20AU-T is offered in an SOIC-8 package, whereas the ACS722LLCTR-05AB-T is offered in an SOIC-8 package with different pin functions and isolation ratings. They are not direct drop-in replacements.

What is the measurement range of each sensor?

The ACS723LLCTR-20AU-T measures up to 20 A unidirectional current. The ACS722LLCTR-05AB-T measures up to 5 A bidirectional current.

What output types do these sensors provide?

The ACS723LLCTR-20AU-T provides an analog voltage output proportional to the sensed current. The ACS722LLCTR-05AB-T provides a digital output via an I2C interface.

What are the typical supply voltage requirements for these devices?

Both the ACS723LLCTR-20AU-T and ACS722LLCTR-05AB-T operate from a single 3.3 V or 5 V supply, as specified in their respective datasheets.

Can the ACS722LLCTR-05AB-T be used to replace the ACS723LLCTR-20AU-T in an existing design?

No, not without significant redesign. The ACS722LLCTR-05AB-T has a lower current range, bidirectional sensing, and a digital I2C output, whereas the ACS723LLCTR-20AU-T has a higher current range, unidirectional sensing, and an analog output.

What isolation voltage do these current sensors provide?

Both the ACS723LLCTR-20AU-T and ACS722LLCTR-05AB-T provide basic isolation rated for 2.1 kVRMS, as stated in their manufacturer datasheets.

Which sensor is better suited for battery monitoring applications?

The ACS722LLCTR-05AB-T is better suited for low-current battery monitoring due to its 5 A bidirectional range and digital output. The ACS723LLCTR-20AU-T is better for higher-current unidirectional monitoring up to 20 A.