AD5252BRUZ1-RL7 vs AD5251BRUZ100

Dieser detaillierte Vergleich von AD5252BRUZ1-RL7 und AD5251BRUZ100 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD5251BRUZ100 can serve as a functional replacement candidate for the AD5252BRUZ1-RL7 in applications tolerant of reduced resolution and single-channel operation, provided the system design accommodates the different end-to-end resistance and I²C address configuration. Design validation is recommended before committing to production substitution.

Resolution Validation required
Number of Channels Not compatible
End-to-End Resistance Not compatible
Package Type High match

Parts at a glance

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD5252BRUZ1-RL7 AD5251BRUZ100 Why it matters
Number of Positions 256 64 Determines the resolution of the digital potentiometer; a 256-position device offers finer wiper adjustment than a 64-position device.
End-to-End Resistance 1 kΩ 100 kΩ Sets the nominal resistance of the potentiometer, directly affecting the voltage divider ratio and current handling in the target circuit.
Number of Potentiometers 2 1 Indicates whether the device provides dual or single channels, which affects board space and the number of independently adjustable nodes.
Interface Type I²C Up/Down (3-wire) Defines the digital control protocol; I²C allows addressable multi-device buses while up/down requires dedicated control lines.
Nonvolatile Memory Yes (EEPROM) No Nonvolatile storage retains the wiper setting across power cycles, eliminating the need for re-initialization after each power-up.
Supply Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V Defines the compatible power rails; both parts support the same range, allowing similar supply design.
Resistance Tolerance ±30% ±30% Specifies the variation in end-to-end resistance, which impacts absolute accuracy of the divider ratio.
Operating Temperature Range -40°C to +105°C -40°C to +105°C Determines the environmental conditions under which the device can reliably operate.
Package / Mounting 14-TSSOP (Surface Mount) 14-TSSOP (Surface Mount) Affects PCB footprint and assembly compatibility; identical packages allow drop-in replacement on the same land pattern.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD5252BRUZ1-RL7 AD5251BRUZ100
Supplier - Analog Devices Inc.,Rochester Electronics, LLC
Part Status Active Obsolete
Taper Linear Linear
Configuration Potentiometer Potentiometer
Number of Circuits 2 2
Number of Taps 256 64
Resistance(Ohms) 1k 100k
Interface I²C I²C
Memory Type Non-Volatile Non-Volatile
Voltage - Supply 2.7V ~ 5.5V, ±2.25V ~ 2.75V 2.7V ~ 5.5V, ±2.25V ~ 2.75V
Features Selectable Address Selectable Address
Tolerance ±30% ±20%
Temperature Coefficient(Typ) 650ppm/°C 650ppm/°C
Mounting Type Surface Mount Surface Mount
Operating Temperature -40°C ~ 105°C -40°C ~ 105°C

Frequently asked questions

What are the key differences between the AD5252BRUZ1-RL7 and the AD5251BRUZ100?

The AD5252BRUZ1-RL7 is a dual-channel, 8-bit digital potentiometer (256 positions) with a 1 kΩ end-to-end resistance, while the AD5251BRUZ100 is a dual-channel, 6-bit digital potentiometer (64 positions) with a 100 kΩ end-to-end resistance. Both are nonvolatile I²C-compatible devices in 14-lead TSSOP packages, but they differ in resolution, resistance value, and ordering quantity (RL7 denotes tape-and-reel packaging).

Are the AD5252BRUZ1-RL7 and AD5251BRUZ100 pin-compatible?

Yes. Both devices are offered in the same 14-lead TSSOP (RU-14) package and share the same pinout for I²C communication, address pins, and potentiometer terminals. However, pin compatibility does not guarantee functional equivalence because the wiper resolution and end-to-end resistance differ.

Can the AD5252BRUZ1-RL7 be used as a drop-in replacement for the AD5251BRUZ100?

No, not without design validation. The AD5252BRUZ1-RL7 has 256 wiper positions and a 1 kΩ end-to-end resistance, whereas the AD5251BRUZ100 has 64 wiper positions and a 100 kΩ end-to-end resistance. These differences affect the wiper resistance, voltage divider ratios, and current-handling capability, so circuit performance must be re-evaluated before substitution.

What is the wiper resistance for each device?

The AD5252BRUZ1-RL7 (1 kΩ version) has a typical wiper resistance of 50 Ω, while the AD5251BRUZ100 (100 kΩ version) has a typical wiper resistance of 100 Ω. These values are specified in the respective manufacturer datasheets and affect the minimum achievable resistance and voltage divider accuracy.

Do both devices support nonvolatile memory storage of the wiper setting?

Yes. Both the AD5252BRUZ1-RL7 and AD5251BRUZ100 include nonvolatile EEPROM that retains the wiper position after power-down, allowing the devices to power up in the previously stored setting without requiring external microcontroller intervention.

What is the I²C interface speed and supply voltage range for these digital potentiometers?

Both devices operate from a single 2.7 V to 5.5 V supply and support I²C-compatible serial communication at speeds up to 400 kHz. These parameters are common to the AD5251/AD5252 family and are verified in the Analog Devices datasheets.

How does the resolution difference affect the step size in a voltage divider application?

In a voltage divider configuration, the AD5252BRUZ1-RL7 provides 256 steps (8-bit), yielding a step size of approximately 0.39% of the input voltage, while the AD5251BRUZ100 provides 64 steps (6-bit), yielding a step size of approximately 1.56% of the input voltage. The higher-resolution AD5252BRUZ1-RL7 allows finer adjustment of the output voltage.

What are the operating temperature ranges for both devices?

Both the AD5252BRUZ1-RL7 and AD5251BRUZ100 are specified for the industrial temperature range of −40°C to +105°C, as stated in the Analog Devices datasheets. This makes them suitable for industrial and automotive applications within that range.