AD5252BRUZ1 vs AD5253BRU50-RL7

Dieser detaillierte Vergleich von AD5252BRUZ1 und AD5253BRU50-RL7 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The AD5252BRUZ1 and AD5253BRU50-RL7 are not drop-in replacements for each other. They differ in channel count, end-to-end resistance, and interface protocol, requiring circuit redesign and firmware modification before substitution.

Different channel count Different end-to-end resistance Different interface protocol Different wiper configuration

Parts at a glance

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD5252BRUZ1 AD5253BRU50-RL7 Why it matters
Number of Positions 256 64 Determines the wiper resolution; a 256-position device offers finer adjustment granularity than a 64-position device.
Number of Channels 2 4 Indicates how many independent potentiometer channels are available in a single package, affecting circuit density and channel count requirements.
End-to-End Resistance 1 kΩ 50 kΩ Sets the nominal resistance range of the potentiometer, which must match the impedance requirements of the surrounding circuit.
Interface Type I²C I²C Defines the digital communication protocol used to control the device; both use I²C, so host controller compatibility is maintained.
Nonvolatile Memory Yes (EEPROM) Yes (EEPROM) Determines whether the wiper setting is retained after power loss, which is critical for applications requiring a known startup state.
Supply Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V Specifies the operating voltage range; matching ranges ensure compatibility with the same power supply rails.
Package Type 14-Lead TSSOP 20-Lead TSSOP Affects PCB footprint and layout; different pin counts and body sizes require different board designs.
Operating Temperature Range -40°C to +105°C -40°C to +105°C Defines the environmental conditions under which the device is guaranteed to operate reliably.
Wiper Resistance ~50 Ω (typical) ~50 Ω (typical) Adds a fixed series resistance in the signal path; lower values reduce signal attenuation and loading effects.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD5252BRUZ1 AD5253BRU50-RL7
Supplier - Analog Devices Inc.,Rochester Electronics, LLC
Part Status Active Obsolete
Taper Linear Linear
Configuration Potentiometer Potentiometer
Number of Circuits 2 4
Number of Taps 256 64
Resistance(Ohms) 1k 50k
Interface I²C I²C
Memory Type Non-Volatile Non-Volatile
Voltage - Supply 2.7V ~ 5.5V, ±2.25V ~ 2.75V 2.7V ~ 5.5V, ±2.25V ~ 2.75V
Features Selectable Address Selectable Address
Tolerance ±30% ±20%
Temperature Coefficient(Typ) 650ppm/°C 650ppm/°C
Mounting Type Surface Mount Surface Mount
Operating Temperature -40°C ~ 105°C -40°C ~ 105°C

Frequently asked questions

What are the key differences between the AD5252BRUZ1 and AD5253BRU50-RL7 digital potentiometers?

The AD5252BRUZ1 is a dual-channel, 8-bit digital potentiometer with a 1 kΩ end-to-end resistance, while the AD5253BRU50-RL7 is a quad-channel, 6-bit digital potentiometer with a 50 kΩ end-to-end resistance. The AD5252 offers higher resolution (256 positions per channel) compared to the AD5253 (64 positions per channel), but the AD5253 provides twice as many channels.

Are the AD5252BRUZ1 and AD5253BRU50-RL7 pin-compatible?

No. The AD5252BRUZ1 is supplied in a 14-lead TSSOP package, while the AD5253BRU50-RL7 is supplied in a 20-lead TSSOP package. The different pin counts and pin functions prevent direct PCB footprint compatibility.

What is the resolution and number of positions for each device?

The AD5252BRUZ1 provides 8-bit resolution with 256 positions per channel. The AD5253BRU50-RL7 provides 6-bit resolution with 64 positions per channel.

What are the end-to-end resistance values and tolerances for these digital potentiometers?

The AD5252BRUZ1 has a 1 kΩ nominal end-to-end resistance. The AD5253BRU50-RL7 has a 50 kΩ nominal end-to-end resistance. Both devices typically offer ±30% resistance tolerance as specified in the manufacturer datasheets.

What digital interface do the AD5252BRUZ1 and AD5253BRU50-RL7 use?

Both devices use a 2-wire I²C-compatible serial interface for programming and control.

What are the typical operating voltage ranges for these devices?

Both the AD5252BRUZ1 and AD5253BRU50-RL7 operate from a single 2.7 V to 5.5 V supply, or from dual ±2.5 V supplies, as specified in the Analog Devices datasheets.

Can the AD5252BRUZ1 be used as a drop-in replacement for the AD5253BRU50-RL7?

No. The devices differ in channel count (2 vs. 4), resolution (8-bit vs. 6-bit), end-to-end resistance (1 kΩ vs. 50 kΩ), and package (14-lead vs. 20-lead TSSOP). A direct drop-in replacement is not possible without redesigning the circuit and PCB layout.

What are the typical applications for each device?

The AD5252BRUZ1 is typically used in applications requiring higher resolution and lower resistance, such as fine gain adjustment and offset trimming in dual-channel signal paths. The AD5253BRU50-RL7 is typically used in multi-channel applications requiring four independent potentiometer settings, such as programmable filters and sensor calibration, where 6-bit resolution is sufficient.