AD5318ARU vs AD5313BRU-REEL

Dieser detaillierte Vergleich von AD5318ARU und AD5313BRU-REEL bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The AD5318ARU and AD5313BRU-REEL are not drop-in replacements for each other. Although both are quad 10-bit voltage-output DACs from Analog Devices in TSSOP packages, they differ fundamentally in digital interface, reference architecture, resolution class, and channel count, requiring hardware and firmware redesign before substitution.

Different digital interface Different reference type Different resolution Different channel count

Parts at a glance

Part A

AD5318ARU

Analog Devices Inc.

Lifecycle
Active
Stock
1529 Stückzahl
Package
TSSOP-16
Series
Data Acquisition von Digital to Analog Converters (DAC)
Part B

AD5313BRU-REEL

Analog Devices Inc.

Lifecycle
Active
Stock
9066 Stückzahl
Package
TSSOP-16
Series
Data Acquisition von Digital to Analog Converters (DAC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD5318ARU AD5313BRU-REEL Why it matters
Number of DAC Channels 8 2 Channel count determines how many independent analog outputs the device can drive, directly affecting whether it can replace the other in a multi-channel system.
Resolution 10 bits 10 bits Resolution sets the smallest analog output step; matching resolution is essential for equivalent output precision.
Interface Type SPI / DSP I2C The digital interface must match the host controller; SPI and I2C are not directly interchangeable without protocol changes.
Supply Voltage Range 2.5 V to 5.5 V 2.5 V to 5.5 V Compatible supply ranges allow the parts to operate in the same power environment without level shifting.
Package / Case 16-Lead TSSOP 16-Lead TSSOP Package footprint and pin count must match for a drop-in board replacement.
Output Type Voltage Buffered Voltage Buffered Buffered voltage outputs simplify external circuitry and must match the target application's signal requirements.
Reference Type External External Reference configuration affects accuracy and requires matching external reference circuitry for equivalent performance.
Operating Temperature Range -40°C to +105°C -40°C to +105°C Temperature range must cover the application's environment for reliable operation.
Settling Time 6 µs 6 µs Settling time determines how fast the DAC can update its output, affecting dynamic performance in control loops.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD5318ARU AD5313BRU-REEL
Supplier - Rochester Electronics, LLC
Part Status Obsolete Obsolete
Number of Bits 10 -
Number of D/A Converters 8 -
Settling Time 9µs -
Output Type Voltage - Buffered -
Differential Output No -
Data Interface SPI, DSP -
Reference Type External -
Voltage - Supply, Analog 2.5V ~ 5.5V -
Voltage - Supply, Digital 2.5V ~ 5.5V -
INL / DNL(LSB) ±0.5, ±0.05 -
Architecture String DAC -
Operating Temperature -40°C ~ 125°C -

Frequently asked questions

What are the key differences between the AD5318ARU and the AD5313BRU-REEL?

The AD5318ARU is an octal 10-bit voltage-output DAC in a 16-lead TSSOP package, while the AD5313BRU-REEL is a dual 10-bit voltage-output DAC in a 16-lead TSSOP package supplied on tape and reel. The primary differences are channel count (8 vs 2), package quantity per reel, and specified performance grades.

Are the AD5318ARU and AD5313BRU-REEL pin-compatible?

No. Although both devices are offered in a 16-lead TSSOP package, their pinouts differ because the AD5318 provides eight DAC channels and the AD5313 provides two DAC channels. Pin functions and assignments are not interchangeable, so PCB layouts must be designed separately for each part.

What is the resolution and architecture of each device?

Both the AD5318ARU and the AD5313BRU-REEL are 10-bit voltage-output digital-to-analog converters. Each channel includes an output amplifier and is designed for single-supply operation with a rail-to-rail output stage.

What supply voltage range do these DACs support?

Both devices operate from a single 2.5 V to 5.5 V supply, making them suitable for portable and low-power systems that require 10-bit DAC performance.

What digital interface do the AD5318ARU and AD5313BRU-REEL use?

Both parts use a serial interface compatible with SPI, QSPI, MICROWIRE, and DSP interface standards. The interface supports daisy-chain operation and allows multiple devices to share a common bus.

How do the reference input requirements compare?

Both devices require an external reference voltage applied to the REFIN pin to set the full-scale output. The reference input range and input impedance characteristics are specified in the respective manufacturer datasheets and should be verified for each design.

What are the operating temperature ranges for these devices?

The AD5318ARU and AD5313BRU-REEL are specified for the industrial temperature range of −40°C to +105°C, as documented in the Analog Devices datasheets for these products.

Can the AD5318ARU be used as a drop-in replacement for the AD5313BRU-REEL?

No. The AD5318ARU has eight DAC channels while the AD5313BRU-REEL has two, and their pinouts and package configurations differ. A direct drop-in replacement is not possible without redesigning the PCB and updating the system firmware to account for the different channel count and register map.