AD620BRZ-R7
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 2808 Stückzahl
- Package
- SOIC-8
- Series
- Linear-Verstärker.Instrumentation, OP-Verstärker, Pufferverstärker
Dieser detaillierte Vergleich von AD620BRZ-R7 und AD620AR-REEL bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.
Replacement verdict
The AD620BRZ-R7 and AD620AR-REEL are functionally interchangeable instrumentation amplifiers sharing the same core architecture, pinout, and package family, making the AD620BRZ-R7 a viable replacement candidate for the AD620AR-REEL in most designs. The primary distinction lies in the grade-level specifications, where the BRZ grade offers tighter gain error and offset performance than the AR grade. Designers should confirm that the improved precision grade does not affect cost-sensitive BOM targets and verify that gain-setting resistor tolerances remain compatible with the tighter specifications.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD620BRZ-R7 | AD620AR-REEL | Why it matters |
|---|---|---|---|
| Grade / Accuracy Class | B grade (higher precision) | A grade (standard precision) | The B grade offers tighter guaranteed specifications, so it can be used where the A grade's looser tolerances are insufficient for the application's error budget. |
| Input Offset Voltage (max) | 50 µV | 125 µV | Lower offset voltage reduces DC error at the output, which is critical in precision instrumentation and low-level signal amplification. |
| Input Offset Voltage Drift (max) | 0.6 µV/°C | 1.0 µV/°C | Lower drift maintains accuracy over temperature, important for applications operating across wide temperature ranges without recalibration. |
| Input Bias Current (max) | 1.0 nA | 2.0 nA | Lower bias current reduces errors when driven from high-impedance sources, improving accuracy in sensor and bridge applications. |
| Gain Error (max, G=1000) | 0.15% | 0.30% | Tighter gain error improves absolute gain accuracy, which matters for calibrated measurement systems. |
| CMRR (min, G=1000) | 120 dB | 110 dB | Higher common-mode rejection suppresses interference and noise, improving signal fidelity in noisy environments. |
| Input Noise Voltage (1 kHz) | 9 nV/√Hz | 13 nV/√Hz | Lower input noise improves the signal-to-noise ratio for small signals, which is important in precision low-level measurement. |
| Supply Voltage Range | ±2.3 V to ±18 V | ±2.3 V to ±18 V | Identical supply range means both parts are interchangeable for power supply compatibility. |
| Package | 8-Lead SOIC | 8-Lead SOIC | Same package ensures footprint and assembly compatibility for drop-in substitution. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Identical temperature range confirms both parts suit the same environmental conditions. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD620BRZ-R7 | AD620AR-REEL |
|---|---|---|
| Supplier | - | Analog Devices Inc. |
| Part Status | Active | Obsolete |
| Amplifier Type | Instrumentation | Instrumentation |
| Number of Circuits | 1 | 1 |
| Slew Rate | 1.2V/µs | 1.2V/µs |
| -3 dB Bandwidth | 1 MHz | 1 MHz |
| Current - Input Bias | 500 pA | 500 pA |
| Voltage - Input Offset | 15 µV | 30 µV |
| Supply Current | 900µA | 900µA |
| Current - Output / Channel | 18 mA | 18 mA |
| Voltage - Supply Span(Min) | 4.6 V | 4.6 V |
| Voltage - Supply Span(Max) | 36 V | 36 V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
The primary differences are grade and packaging. The AD620BRZ-R7 is a B-grade device in a 7-inch reel (R7), while the AD620AR-REEL is an A-grade device supplied on a standard reel. The B-grade offers tighter specifications than the A-grade, notably lower input offset voltage (50 µV max vs. 125 µV max), lower input offset drift (0.6 µV/°C max vs. 1.0 µV/°C max), and higher CMRR (100 dB min vs. 93 dB min at G=10). Both are the same AD620 instrumentation amplifier core in an 8-lead SOIC package.
Yes. Both parts are AD620 instrumentation amplifiers in the same 8-lead SOIC (R-8) package with identical pin functions (gain resistor pins, +IN, -IN, +VS, -VS, OUTPUT, REF). They are functionally interchangeable in the same PCB footprint, but the B-grade's tighter offset, drift, and CMRR specifications should be verified against the design's error budget before substituting an A-grade part.
Both the AD620BRZ-R7 and AD620AR-REEL set gain with a single external resistor Rg connected between pins 1 and 8, using the relationship G = 49.4 kΩ / Rg + 1. For G = 1, pin 1 and pin 8 are left unconnected. This gain equation is common to both grades.
Both devices operate from dual supplies of ±2.3 V to ±18 V (or a single supply of 4.6 V to 36 V) and draw a maximum supply current of 1.3 mA. These ratings are identical for the AD620BRZ-R7 and AD620AR-REEL because they share the same AD620 die.
The AD620BRZ-R7 (B-grade) specifies input offset voltage of 50 µV max and input offset drift of 0.6 µV/°C max. The AD620AR-REEL (A-grade) specifies 125 µV max offset and 1.0 µV/°C max drift. Designs requiring low DC error over temperature should account for this grade difference.
The R7 suffix on the AD620BRZ-R7 denotes a 7-inch tape-and-reel package containing 750 units. The REEL designation on the AD620AR-REEL denotes the standard reel packaging for that grade. Both are surface-mount SOIC reels suitable for automated pick-and-place assembly; the reel size and quantity per reel differ.
Both the AD620BRZ-R7 and AD620AR-REEL are specified over the industrial temperature range of −40°C to +85°C and are supplied in an 8-lead SOIC package. Package and temperature ratings are identical across the two grades.
No. The AD620BRZ-R7 (B-grade) guarantees a minimum CMRR of 100 dB at G=10, while the AD620AR-REEL (A-grade) guarantees 93 dB at G=10. Bandwidth is set by the same internal architecture (approximately 1 MHz at G=1, 120 kHz at G=10, 12 kHz at G=100), but the guaranteed CMRR specification differs by grade.