AD7656BSTZ vs AD7655AST

Dieser detaillierte Vergleich von AD7656BSTZ und AD7655AST bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The AD7656BSTZ and AD7655AST are not drop-in replacements for one another. The AD7656BSTZ is a six-channel simultaneous-sampling bipolar ADC in a 64-lead LQFP, while the AD7655AST is a four-channel part in a 48-lead LQFP with a different analog input architecture and channel count. Board-level redesign, revised channel routing, and firmware re-validation would be required before substitution.

Different channel count Different package and footprint Different input architecture Different digital interface timing

Parts at a glance

Part A

AD7656BSTZ

Analog Devices Inc.

Lifecycle
Active
Stock
3438 Stückzahl
Package
LQFP-64
Series
Datenerfassung mit Analog to Digital Converters (ADC)
Part B

AD7655AST

Analog Devices Inc.

Lifecycle
Active
Stock
5389 Stückzahl
Package
LQFP-48
Series
Datenerfassung mit Analog to Digital Converters (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD7656BSTZ AD7655AST Why it matters
Number of ADC Channels 6 4 Channel count determines how many independent analog signals can be sampled simultaneously, directly affecting system architecture and board space.
Resolution 16 bits 16 bits Resolution sets the smallest detectable signal change; both are 16-bit, so precision class is equivalent.
Maximum Sampling Rate 250 kSPS 1 MSPS Throughput limits the highest input frequency that can be captured; the AD7655 supports faster sampling per channel.
Input Type Single-ended Pseudo-differential Input configuration affects noise immunity and how sensor or signal sources must be interfaced to the converter.
Supply Voltage (Analog) 5 V 5 V Analog supply defines the input signal range and must match the surrounding analog front-end design.
Interface Parallel / Serial (SPI) Parallel Available digital interfaces determine compatibility with the host processor and PCB routing complexity.
Package 64-Lead LQFP 48-Lead LQFP Package footprint and pin count affect board layout and whether a drop-in replacement is physically possible.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Temperature range confirms suitability for industrial environments; both parts share the same industrial rating.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD7656BSTZ AD7655AST
Supplier - Rochester Electronics, LLC
Series iCMOS® PulSAR®
Part Status Active Obsolete
Number of Bits 16 16
Sampling Rate(Per Second) 250k 1M
Number of A/D Converters 6 1
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Number of Inputs 6 -
Input Type Single Ended -
Data Interface SPI, Parallel, DSP -
Configuration S/H-ADC -
Ratio - S / H: ADC 1:1 -
Architecture SAR -
Reference Type External, Internal -
Voltage - Supply, Analog 5V -
Voltage - Supply, Digital 5V -
Features Simultaneous Sampling, True Bipolar -

Frequently asked questions

What are the primary differences between the AD7656BSTZ and the AD7655AST?

The AD7656BSTZ is a 16-bit, 6-channel simultaneous-sampling SAR ADC offering 250 kSPS per channel, while the AD7655AST is a 16-bit, 4-channel simultaneous-sampling SAR ADC offering 500 kSPS per channel. The AD7656BSTZ provides more channels at half the per-channel throughput, whereas the AD7655AST provides fewer channels at twice the per-channel throughput.

Do the AD7656BSTZ and AD7655AST have the same package and pinout?

No. The AD7656BSTZ is supplied in a 64-lead LQFP package, while the AD7655AST is supplied in a 48-lead LQFP package. The differing lead counts and pin assignments mean the two devices are not footprint-compatible and cannot be interchanged on the same PCB land pattern.

What are the analog input voltage ranges for each device?

Both devices support selectable analog input ranges of ±10 V, ±5 V, and 0 V to 10 V, making them suitable for industrial bipolar and unipolar signal acquisition. The input range is configured via the device control interface.

How do the throughput and channel count trade off between the two parts?

The AD7656BSTZ offers six simultaneous-sampling channels at 250 kSPS each, giving an aggregate throughput of 1.5 MSPS. The AD7655AST offers four simultaneous-sampling channels at 500 kSPS each, giving an aggregate throughput of 2 MSPS. Selection depends on whether channel count or per-channel sampling rate is the priority.

What digital interfaces do the AD7656BSTZ and AD7655AST support?

Both devices provide a parallel interface and a serial interface for connection to host processors and DSPs. The parallel interface supports word and byte modes, and the serial interface provides a high-speed SPI-compatible connection.

What are the supply requirements for the AD7656BSTZ and AD7655AST?

Both devices operate from a 5 V analog supply (AVDD) and a separate digital supply (DVDD) that supports interfacing to 3 V or 5 V logic. They also require an external reference or the internal reference, and the AD7656BSTZ additionally uses a high-voltage supply arrangement for its bipolar input capability.

Can the AD7655AST be used as a drop-in replacement for the AD7656BSTZ?

No. The AD7655AST has fewer channels (4 versus 6), a different package (48-lead versus 64-lead LQFP), a different pinout, and a different per-channel throughput (500 kSPS versus 250 kSPS). A direct drop-in replacement is not possible; any substitution requires a PCB redesign and firmware changes validated against the manufacturer datasheets.

Are both devices specified over the industrial temperature range?

Yes. Both the AD7656BSTZ and the AD7655AST are specified for operation over the industrial temperature range of −40 °C to +85 °C, as stated in their respective manufacturer datasheets.