AD7718BRUZ vs AD7714ARS-5

Dieser detaillierte Vergleich von AD7718BRUZ und AD7714ARS-5 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD7718BRUZ and AD7714ARS-5 are both 24-bit sigma-delta ADCs from Analog Devices sharing a comparable signal chain architecture, but they differ in channel count, package footprint, and supply configuration. The AD7714ARS-5 can serve as a functional substitute for the AD7718BRUZ only where the reduced channel count and SSOP-28 footprint are acceptable; a full pin-for-pin drop-in replacement is not possible without layout and firmware validation.

Resolution and ADC Architecture Validation required
Channel Count Not compatible
Package Type Not compatible
Supply Voltage Range Validation required

Parts at a glance

Part A

AD7718BRUZ

Analog Devices Inc.

Lifecycle
Active
Stock
5458 Stückzahl
Package
TSSOP-28
Series
Datenerfassung mit Analog to Digital Converters (ADC)
Part B

AD7714ARS-5

Analog Devices Inc.

Lifecycle
Active
Stock
4752 Stückzahl
Package
SSOP-28
Series
Datenerfassung mit Analog to Digital Converters (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD7718BRUZ AD7714ARS-5 Why it matters
Resolution (bits) 24 24 Both are 24-bit sigma-delta ADCs, so resolution alone does not distinguish them for substitutability.
Number of input channels 8 (4 differential / 8 single-ended) 5 (3 differential / 5 single-ended) Channel count determines how many sensors can be multiplexed; the AD7718 offers more inputs, which affects system architecture.
Package 28-lead TSSOP 24-lead SSOP Different package footprints and pin counts prevent direct drop-in replacement on an existing PCB.
Supply voltage (analog) 2.7 V to 5.25 V 5 V (4.75 V to 5.25 V) The AD7718 supports lower supply voltages, enabling 3 V systems, while the AD7714-5 is a 5 V-only device.
Interface SPI / QSPI / MICROWIRE / DSP compatible serial SPI / QSPI / MICROWIRE / DSP compatible serial Both use a similar serial interface, so firmware-level compatibility is generally maintained.
PGA gain range 1 to 128 1 to 128 Identical programmable gain ranges allow similar handling of low-level sensor signals.
Output data rate (max) Up to 1.365 kSPS Up to 1 kSPS Slightly higher throughput on the AD7718 may matter for faster-sampling applications.
Operating temperature range -40 °C to +85 °C -40 °C to +85 °C Identical industrial temperature ranges mean both suit the same environmental conditions.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD7718BRUZ AD7714ARS-5
Supplier - Analog Devices Inc.,Rochester Electronics, LLC
Part Status Active Obsolete
Number of Bits 24 24
Sampling Rate(Per Second) 1.37k 1k
Number of Inputs 4/5, 8/10 3, 5
Input Type Differential, Pseudo-Differential Differential, Pseudo-Differential
Data Interface SPI, DSP SPI, DSP
Configuration MUX-PGA-ADC MUX-PGA-ADC
Number of A/D Converters 1 1
Architecture Sigma-Delta Sigma-Delta
Reference Type External External
Voltage - Supply, Analog 2.7V ~ 3.6V, 5V 5V
Voltage - Supply, Digital 2.7V ~ 3.6V, 5V 3V ~ 5.25V
Features PGA PGA
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C

Frequently asked questions

What are the primary functional differences between the AD7718BRUZ and the AD7714ARS-5?

The AD7718BRUZ is a 24-bit, 8-channel (4 differential) sigma-delta ADC with an on-chip PGA and programmable filter, housed in a 28-lead TSSOP. The AD7714ARS-5 is a 24-bit, 5-channel (3 differential) sigma-delta ADC with an on-chip PGA, housed in a 24-lead SSOP and specified for 5 V operation. The AD7718 offers more input channels and a different package, while the AD7714 provides a smaller channel count in a narrower package.

Are the AD7718BRUZ and AD7714ARS-5 pin-compatible or package-compatible?

No. The AD7718BRUZ uses a 28-lead TSSOP package, while the AD7714ARS-5 uses a 24-lead SSOP package. The pin counts and package footprints differ, so they are not drop-in replacements and require different PCB land patterns.

Do both devices support the same supply voltage range?

No. The AD7714ARS-5 is specified for a 5 V analog supply (the "-5" suffix denotes 5 V operation). The AD7718BRUZ operates from a 2.7 V to 5.25 V analog supply (AVDD) and a 2.7 V to 5.25 V digital supply (DVDD), allowing lower-voltage operation that the AD7714ARS-5 does not support.

How do the input channel counts compare between the two ADCs?

The AD7718BRUZ provides 8 analog input channels configurable as 4 fully differential or 8 pseudo-differential inputs. The AD7714ARS-5 provides 5 analog input channels configurable as 3 fully differential or 5 pseudo-differential inputs. The AD7718 therefore offers more channels for multi-sensor designs.

Do both parts include an on-chip programmable gain amplifier (PGA) and digital filter?

Yes. Both the AD7718BRUZ and AD7714ARS-5 integrate a programmable gain amplifier and a sigma-delta modulator with on-chip digital filtering, allowing direct interfacing of low-level sensor signals and rejection of power-line frequencies without external signal conditioning.

What serial interface do the AD7718BRUZ and AD7714ARS-5 use?

Both devices provide a three-wire serial interface compatible with SPI, QSPI, MICROWIRE, and DSP interface standards, supporting daisy-chaining and readback of the internal registers for configuration and data retrieval.

Can the AD7714ARS-5 be used as a direct substitute for the AD7718BRUZ in an existing design?

No. Because the two devices differ in package (24-lead SSOP vs 28-lead TSSOP), channel count (5 vs 8), and supply voltage specification (5 V vs 2.7 V to 5.25 V), a direct substitution is not possible. Any replacement requires a PCB redesign and revalidation against the target system requirements.