AD7812YRUZ vs AD7813YRU

Dieser detaillierte Vergleich von AD7812YRUZ und AD7813YRU bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The AD7812YRUZ and AD7813YRU are not drop-in replacements for one another. Although both are 10-bit successive-approximation ADCs from Analog Devices in a TSSOP-16 package, they differ in channel count, digital interface type, and conversion throughput, so a direct board-level substitution is not possible without design changes.

Different channel count Different digital interface Different throughput Different input configuration

Parts at a glance

Part A

AD7812YRUZ

Analog Devices Inc.

Lifecycle
Active
Stock
3695 Stückzahl
Package
TSSOP-20
Series
Datenerfassung mit Analog to Digital Converters (ADC)
Part B

AD7813YRU

Analog Devices Inc.

Lifecycle
Active
Stock
7561 Stückzahl
Package
TSSOP-16
Series
Datenerfassung mit Analog to Digital Converters (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD7812YRUZ AD7813YRU Why it matters
Number of ADC Channels 8 1 Determines how many analog signals can be sampled; an 8-channel device can multiplex multiple sensors while a single-channel device handles only one input.
Resolution 10 bit 10 bit Sets the quantization granularity of the conversion; both provide 10-bit output, so measurement precision is comparable.
Sampling Rate 350 kSPS 400 kSPS Maximum conversion throughput affects the ability to capture fast-changing signals; the AD7813 offers a slightly higher sample rate.
Input Type Single-ended Single-ended Defines whether inputs are measured relative to ground or differentially; both are single-ended, so signal conditioning requirements are similar.
Interface Serial (SPI/QSPI/MICROWIRE/DSP) Parallel Determines how the ADC connects to a host processor; serial reduces pin count while parallel offers faster bus transfers, so they are not drop-in compatible.
Supply Voltage 2.7 V to 5.5 V 2.7 V to 5.5 V Operating supply range must match the system rail; both support the same 2.7 V to 5.5 V range, easing power design.
Package / Case 16-TSSOP 16-TSSOP Footprint and pin count affect PCB layout and assembly; identical 16-TSSOP packages allow the same board footprint.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Defines the environmental limits for reliable operation; matching industrial ranges suit the same application environments.
Power Consumption Low power (CMOS) Low power (CMOS) Affects thermal budget and battery life; both use low-power CMOS processes suitable for portable and embedded systems.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD7812YRUZ AD7813YRU
Supplier - Analog Devices Inc.,Rochester Electronics, LLC
Part Status Active Obsolete
Number of Bits 10 10
Sampling Rate(Per Second) 350k 400k
Number of Inputs 7, 8 1
Input Type Pseudo-Differential, Single Ended Single Ended
Data Interface DSP Parallel
Configuration MUX-S/H-ADC S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture SAR SAR
Reference Type External, Internal External
Voltage - Supply, Analog 2.7V ~ 5.5V 2.7V ~ 5.5V
Voltage - Supply, Digital 2.7V ~ 5.5V 2.7V ~ 5.5V
Operating Temperature -40°C ~ 105°C -40°C ~ 105°C

Frequently asked questions

What are the key differences between the AD7812YRUZ and the AD7813YRU?

The AD7812YRUZ is a 10-bit, 8-channel successive-approximation ADC with a serial interface, housed in a 20-lead TSSOP package. The AD7813YRU is a 10-bit, single-channel ADC with a parallel interface, housed in a 16-lead TSSOP package. The primary differences are channel count (8 vs. 1) and digital interface type (serial vs. parallel).

Are the AD7812YRUZ and AD7813YRU pin-compatible?

No. The AD7812YRUZ uses a 20-lead TSSOP package, while the AD7813YRU uses a 16-lead TSSOP package. The different pin counts and pin functions mean they are not drop-in replacements for each other.

Do both parts share the same resolution and conversion architecture?

Yes. Both the AD7812YRUZ and AD7813YRU are 10-bit successive-approximation ADCs. They share the same core resolution and conversion method, but differ in input channel count and digital interface.

What is the difference in input channel configuration between the two devices?

The AD7812YRUZ provides 8 analog input channels, making it suitable for multi-channel signal acquisition. The AD7813YRU provides a single analog input channel, making it suitable for single-channel measurement applications.

How do the digital interfaces of the AD7812YRUZ and AD7813YRU differ?

The AD7812YRUZ uses a serial digital interface for communication with a host controller. The AD7813YRU uses a parallel digital interface. This difference affects PCB routing, microcontroller pin usage, and firmware design.

Can the AD7813YRU be used as a replacement for the AD7812YRUZ in an existing design?

No, not as a direct replacement. The AD7813YRU has fewer channels (1 vs. 8), a different package (16-lead vs. 20-lead TSSOP), and a parallel rather than serial interface. A redesign of the analog input path, PCB layout, and digital interface would be required.

Are both devices available in the same package type?

Both are offered in TSSOP packages, but with different lead counts. The AD7812YRUZ is in a 20-lead TSSOP, and the AD7813YRU is in a 16-lead TSSOP. The package family is the same, but the footprint and pinout differ.