AD8022ARZ
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 5879 Stückzahl
- Package
- SOIC-8
- Series
- Linear-Verstärker.Instrumentation, OP-Verstärker, Pufferverstärker
Dieser detaillierte Vergleich von AD8022ARZ und AD8021AR-REEL bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.
Replacement verdict
The AD8022ARZ and AD8021AR-REEL are both high-speed voltage-feedback operational amplifiers from Analog Devices sharing a dual/single-channel family lineage, but they are not pin-identical drop-in substitutes. The AD8022ARZ is a dual-channel device in an 8-lead SOIC package, while the AD8021AR-REEL is a single-channel device in an 8-lead SOIC package with a different pinout. Designers must verify channel count, pinout, and supply/bandwidth requirements before substituting; the AD8022ARZ is best suited where two matched amplifiers are needed, whereas the AD8021AR-REEL targets single-channel low-noise, high-speed signal chains.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8022ARZ | AD8021AR-REEL | Why it matters |
|---|---|---|---|
| Number of Amplifiers | 2 (Dual) | 1 (Single) | Channel count determines whether one package can serve two signal paths or only one, directly affecting board layout and part count. |
| -3 dB Bandwidth | 100 MHz | 490 MHz | Bandwidth sets the maximum signal frequency the amplifier can handle with acceptable gain, critical for high-speed signal chains. |
| Slew Rate | 100 V/µs | 470 V/µs | Slew rate limits how fast the output can track large signal swings; higher slew rate supports faster, larger-amplitude signals. |
| Input Voltage Noise Density | 2.5 nV/√Hz | 2.1 nV/√Hz | Lower input noise improves signal-to-noise ratio in low-level signal amplification, affecting precision of the overall system. |
| Supply Current per Amplifier | 4 mA | 7.8 mA | Quiescent current impacts power budget and thermal design, especially in multi-channel or power-sensitive applications. |
| Input Offset Voltage (max) | 1.5 mV | 1 mV | Offset voltage contributes DC error; tighter offset improves accuracy in precision and DC-coupled applications. |
| Package Type | 8-Lead SOIC | 8-Lead SOIC | Package footprint and pinout must match for physical board compatibility, though internal pin functions differ between single and dual devices. |
| Supply Voltage Range | ±2.5 V to ±12 V | ±2.5 V to ±12 V | Operating supply range determines compatibility with the system's power rails and headroom requirements. |
| Output Current | 50 mA | 60 mA | Output drive capability affects the ability to drive low-impedance loads such as cables or ADC inputs without distortion. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD8022ARZ | AD8021AR-REEL |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Amplifier Type | Voltage Feedback | Voltage Feedback |
| Number of Circuits | 2 | 1 |
| Slew Rate | 50V/µs | 460V/µs |
| -3 dB Bandwidth | 130 MHz | 560 MHz |
| Current - Input Bias | 2.5 µA | 7.5 µA |
| Voltage - Input Offset | 1.5 mV | 400 µV |
| Supply Current | 4mA | 7.8mA |
| Current - Output / Channel | 55 mA | 70 mA |
| Voltage - Supply Span(Min) | 4.5 V | 4.5 V |
| Voltage - Supply Span(Max) | 26 V | 24 V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
| Gain Bandwidth Product | 100 MHz | - |
The AD8022ARZ is a dual, low-noise, high-speed voltage feedback operational amplifier, while the AD8021AR-REEL is a single, low-noise, high-speed voltage feedback operational amplifier. The AD8022ARZ integrates two amplifiers in one package, whereas the AD8021AR-REEL contains one amplifier and is supplied in tape-and-reel packaging for automated assembly.
No. The AD8022ARZ is a dual op amp in an 8-lead SOIC package, and the AD8021AR-REEL is a single op amp in an 8-lead SOIC package. Although both use the same package footprint, the pin functions differ because one device contains two amplifiers and the other contains one, so they are not direct drop-in replacements.
The AD8022ARZ offers a -3 dB bandwidth of 130 MHz (G = +1), a slew rate of 120 V/µs, and a settling time of 0.1% in 35 ns. It also features low input voltage noise of 2.7 nV/√Hz and low distortion, making it suitable for high-speed signal conditioning and ADC driving.
The AD8021AR-REEL provides a -3 dB bandwidth of 490 MHz (G = +1), a slew rate of 120 V/µs, and a settling time of 0.1% in 20 ns. It features input voltage noise of 2.1 nV/√Hz and is optimized for low-noise, high-speed applications such as professional video and test equipment.
Both the AD8022ARZ and the AD8021AR-REEL operate from dual supplies of ±2.5 V to ±12 V, or single supplies of 5 V to 24 V. This wide supply range allows use in both low-voltage and higher-voltage signal chains.
The AD8022ARZ is better suited for multi-channel designs because it integrates two independent amplifiers in a single 8-lead SOIC package, reducing board space and component count compared with using two AD8021AR-REEL single amplifiers.
Functionally, one AD8021AR-REEL amplifier can replace one channel of the AD8022ARZ in many circuits, but the substitution is not pin-compatible and requires a revised PCB layout. The designer must also verify that the different bandwidth, noise, and settling specifications meet the application requirements.
The AD8022ARZ is supplied in an 8-lead SOIC package in tube or tray quantities. The AD8021AR-REEL is supplied in an 8-lead SOIC package in tape-and-reel format, which is intended for high-volume automated pick-and-place assembly.