AD8028ARZ
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 5537 Stückzahl
- Package
- SOIC-8
- Series
- Linear-Verstärker.Instrumentation, OP-Verstärker, Pufferverstärker
Dieser detaillierte Vergleich von AD8028ARZ und AD8021AR-REEL bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.
Replacement verdict
The AD8028ARZ and AD8021AR-REEL are both high-speed voltage-feedback operational amplifiers from Analog Devices in the same 8-lead SOIC package, making the AD8028ARZ a viable functional replacement candidate for the AD8021AR-REEL in many designs. However, the two devices differ in supply voltage range, quiescent current, and input bias current, so the replacement should be validated against the target application's supply, power budget, and input impedance requirements before adoption.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8028ARZ | AD8021AR-REEL | Why it matters |
|---|---|---|---|
| Number of Amplifiers | 2 (Dual) | 1 (Single) | Channel count determines whether one package can serve two signal paths; a dual cannot directly replace a single in a single-channel layout without redesign. |
| -3 dB Bandwidth | 190 MHz | 490 MHz | Bandwidth sets the maximum signal frequency the amplifier can handle with acceptable gain; the AD8021 offers substantially higher speed. |
| Slew Rate | 100 V/µs | 460 V/µs | Slew rate limits how fast large-signal outputs can change; higher slew rate supports faster, larger-swing signals without distortion. |
| Input Voltage Noise Density | 4.3 nV/√Hz | 2.1 nV/√Hz | Lower input noise improves signal-to-noise ratio in low-level signal applications; the AD8021 is notably quieter. |
| Supply Voltage Range | 2.7 V to 12 V | ±2.5 V to ±12 V (5 V to 24 V total) | Supply range determines compatibility with the system power rails; the AD8028 supports lower single-supply operation while the AD8021 targets higher-voltage bipolar supplies. |
| Input Bias Current | 4 µA (typ) | 1.5 µA (typ) | Bias current affects DC offset and error in high-impedance circuits; lower bias current reduces offset errors. |
| Quiescent Supply Current per Amplifier | 1.4 mA (typ) | 7.8 mA (typ) | Quiescent current drives power consumption; the AD8028 is far more power-efficient, which matters for portable or thermally constrained designs. |
| Package Type | 8-Lead SOIC | 8-Lead SOIC | Package footprint affects board layout and assembly; matching packages ease physical substitution, though pinouts must still be verified. |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +85 °C | Temperature range determines suitability for harsh or industrial environments; the AD8028 supports a wider high-temperature margin. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD8028ARZ | AD8021AR-REEL |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Amplifier Type | General Purpose | Voltage Feedback |
| Number of Circuits | 2 | 1 |
| Slew Rate | 100V/µs | 460V/µs |
| -3 dB Bandwidth | 190 MHz | 560 MHz |
| Current - Input Bias | 4 µA | 7.5 µA |
| Voltage - Input Offset | 200 µV | 400 µV |
| Supply Current | 6.5mA (x2 Channels) | 7.8mA |
| Current - Output / Channel | 120 mA | 70 mA |
| Voltage - Supply Span(Min) | 2.7 V | 4.5 V |
| Voltage - Supply Span(Max) | 12 V | 24 V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
| Output Type | Rail-to-Rail | - |
The AD8028ARZ is a dual, low-noise, high-speed voltage feedback operational amplifier, while the AD8021AR-REEL is a single, low-noise, high-speed voltage feedback operational amplifier. The AD8028ARZ comes in an 8-lead SOIC package, whereas the AD8021AR-REEL is supplied in an 8-lead SOIC package on tape and reel for automated assembly. The AD8028ARZ integrates two amplifiers per package, while the AD8021AR-REEL contains one amplifier per package.
No. The AD8028ARZ is a dual op-amp in an 8-lead SOIC package with a standard dual pinout, while the AD8021AR-REEL is a single op-amp in an 8-lead SOIC package with a single-amplifier pinout. The pin functions and assignments differ, so they are not drop-in replacements for each other.
Not directly. The AD8028ARZ contains two amplifiers and uses a different pinout than the single AD8021AR-REEL. Substitution requires verifying supply voltage range, gain bandwidth, slew rate, input noise, and PCB layout compatibility against the manufacturer datasheets for both parts. A direct replacement is not possible without design changes.
According to the Analog Devices datasheet, the AD8028ARZ offers a gain bandwidth product of 190 MHz, a slew rate of 100 V/µs, and a settling time of 22 ns to 0.1%. It is specified for low noise operation with an input voltage noise density of 4.3 nV/√Hz at 1 MHz.
Per the Analog Devices datasheet, the AD8021AR-REEL provides a gain bandwidth product of 490 MHz, a slew rate of 120 V/µs, and a settling time of 22 ns to 0.1%. Its input voltage noise density is 2.1 nV/√Hz at 1 MHz, making it suitable for low-noise, high-speed signal conditioning.
The AD8028ARZ operates from a dual supply of ±2.5 V to ±12 V (or 5 V to 24 V single supply). The AD8021AR-REEL operates from a dual supply of ±2.5 V to ±12 V (or 5 V to 24 V single supply). Both parts support similar supply ranges per their respective Analog Devices datasheets.
The AD8028ARZ is better suited for multi-channel signal processing because it integrates two independent operational amplifiers in a single 8-lead SOIC package, reducing board space and component count. The AD8021AR-REEL contains only one amplifier per package, so multi-channel designs would require multiple devices.
The AD8028ARZ is supplied in an 8-lead SOIC package in tube or tray format, while the AD8021AR-REEL is supplied in an 8-lead SOIC package on tape and reel for high-volume automated placement. The "-REEL" suffix on the AD8021AR-REEL indicates tape-and-reel packaging, whereas the AD8028ARZ standard ordering code does not specify reel packaging.