AD8226ARZ-R7
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 5908 Stückzahl
- Package
- SOIC-8
- Series
- Linear-Verstärker.Instrumentation, OP-Verstärker, Pufferverstärker
Dieser detaillierte Vergleich von AD8226ARZ-R7 und AD8223AR bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.
Replacement verdict
The AD8226ARZ-R7 and AD8223AR are both single-channel instrumentation amplifiers from Analog Devices in the same 8-lead SOIC package, making them a plausible functional replacement pairing. However, the AD8226ARZ-R7 offers a wider supply range, rail-to-rail output, and higher gain bandwidth, while the AD8223AR is a fixed-gain-option device with lower quiescent current. Designers should validate gain configuration, supply headroom, and bandwidth requirements before substituting.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8226ARZ-R7 | AD8223AR | Why it matters |
|---|---|---|---|
| Number of Amplifiers | 1 | 1 | Both are single-channel instrumentation amplifiers, so channel count is functionally equivalent. |
| Supply Voltage Range | 2.2 V to 36 V (±1.1 V to ±18 V) | 3 V to 24 V (±1.5 V to ±12 V) | The wider supply range of the AD8226 allows operation in higher-voltage systems where the AD8223 would be overstressed. |
| Gain Setting | Resistor-programmable (G = 1 + 49.4k/RG) | Fixed gain of 5 (internally set) | The AD8226 offers flexible user-set gain, while the AD8223 is limited to a fixed gain of 5, restricting design flexibility. |
| Input Offset Voltage (max) | ±200 µV (typical ±50 µV) | ±250 µV | Lower offset voltage improves DC accuracy in precision measurement applications. |
| Input Bias Current (max) | ±27 nA | ±25 nA | Bias current affects error in high-impedance sensor interfaces; both are comparable but not identical. |
| Bandwidth (–3 dB, G = 5) | 1.5 MHz | 200 kHz | The AD8226 supports much higher signal bandwidth, enabling faster dynamic measurements than the AD8223. |
| CMRR (min, G = 5) | 80 dB | 86 dB | Higher common-mode rejection reduces errors from common-mode noise in noisy industrial environments. |
| Operating Temperature Range | –40 °C to +125 °C | –40 °C to +85 °C | The extended temperature range of the AD8226 suits harsher environments where the AD8223 is not rated. |
| Package | 8-Lead SOIC (R-8) | 8-Lead SOIC (R-8) | Identical package and pinout allow drop-in board-level substitution without layout changes. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD8226ARZ-R7 | AD8223AR |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC,Analog Devices Inc. |
| Part Status | Active | Obsolete |
| Amplifier Type | Instrumentation | Instrumentation |
| Number of Circuits | 1 | 1 |
| Output Type | Rail-to-Rail | Rail-to-Rail |
| Slew Rate | 0.6V/µs | 0.3V/µs |
| -3 dB Bandwidth | 1.5 MHz | 200 kHz |
| Current - Input Bias | 20 nA | 12 nA |
| Voltage - Input Offset | 100 µV | 250 µV |
| Supply Current | 350µA | 650µA |
| Voltage - Supply Span(Min) | 2.2 V | 3 V |
| Voltage - Supply Span(Max) | 36 V | 24 V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
| Current - Output / Channel | 13 mA | - |
The AD8226ARZ-R7 is an instrumentation amplifier with a rail-to-rail output, a gain range of 1 to 1000 set by a single external resistor, and a typical supply current of 350 µA. The AD8223AR is a lower-cost instrumentation amplifier with a fixed gain of 5 to 1000 set by a single external resistor, a rail-to-rail output, and a typical supply current of 400 µA. The AD8226 offers wider gain flexibility (gain of 1 achievable) and lower supply current, while the AD8223 is positioned for cost-sensitive fixed-gain applications.
Both devices are offered in an 8-lead SOIC package (R-8 suffix), and their pinouts follow the standard instrumentation amplifier configuration: pin 1 and pin 8 are gain-setting resistor terminals, pins 2 and 3 are inverting and non-inverting inputs, pin 4 is the negative supply, pin 5 is the reference, pin 6 is the output, and pin 7 is the positive supply. Designers should still verify the exact pinout against the respective manufacturer datasheets before substituting, as internal connections and reference pin behavior may differ.
Not unconditionally. Although both are 8-lead SOIC instrumentation amplifiers with similar pin functions, the AD8226 supports a gain of 1 (no external resistor), whereas the AD8223 has a minimum gain of 5. Circuits designed for the AD8226 at low gains would not function correctly with the AD8223. Gain-setting resistor values, bandwidth, and supply current also differ, so the replacement must be validated against the AD8226 datasheet and the target design requirements.
Both devices operate from dual supplies of ±2.3 V to ±18 V or single supplies of 4.6 V to 36 V, per their respective manufacturer datasheets. This wide supply range makes both suitable for battery-powered and industrial signal-conditioning applications.
On both devices, gain is programmed with a single external resistor connected between the gain-setting pins (pins 1 and 8). For the AD8226, gain is set by the equation G = 1 + 49.4 kΩ/RG, allowing gains from 1 to 1000. For the AD8223, gain is set by G = 5 + 200 kΩ/RG, giving a minimum gain of 5 and a maximum of 1000. The different internal resistor values mean the same RG produces different gains on the two parts.
The AD8226ARZ-R7 provides a bandwidth of 1.5 MHz at G = 1 and 150 kHz at G = 100, with an input voltage noise of 22 nV/√Hz at 1 kHz. The AD8223AR provides a bandwidth of 300 kHz at G = 5 and 30 kHz at G = 100, with an input voltage noise of 27 nV/√Hz at 1 kHz. The AD8226 therefore offers higher bandwidth and slightly lower input noise, which matters in higher-frequency or low-level signal applications.
The AD8226ARZ-R7 typically draws 350 µA of supply current, while the AD8223AR typically draws 400 µA, per the manufacturer datasheets. Both are low-power instrumentation amplifiers suitable for portable and battery-operated instrumentation.
The AD8226ARZ-R7 is better suited for low-gain signal conditioning because it supports a gain of 1 (unity gain) with no external resistor, whereas the AD8223AR has a minimum gain of 5. For applications requiring buffering or gains below 5, the AD8226 is the appropriate choice; the AD8223 is intended for fixed-gain configurations of 5 or higher.