Part A
AD8307AR
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 2581 Stückzahl
- Package
- SOIC-8
- Series
- Linear-Verstärker
Replacement verdict
Not a drop-in replacement
The AD8307AR and AD8300AR are not functionally interchangeable. The AD8307AR is a logarithmic amplifier/detector intended for RF signal measurement, while the AD8300AR is a 12-bit digital-to-analog converter. Their core functions, signal paths, and application roles are fundamentally different, so substitution in a given design is not feasible.
Different device function
Different signal path role
Different input/output interface
Different application domain
Parts at a glance
Part B
AD8300AR
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 8679 Stückzahl
- Package
- SOIC-8
- Series
- Data Acquisition von Digital to Analog Converters (DAC)
Key differences
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8307AR | AD8300AR | Why it matters |
|---|---|---|---|
| Function / Product Type | Logarithmic amplifier (demodulating, 500 MHz) | 12-bit serial digital-to-analog converter (DAC) | These are fundamentally different device classes, so they are not functionally substitutable in any circuit. |
| Package | 8-Lead SOIC (R-8) | 8-Lead SOIC (R-8) | Package compatibility affects PCB footprint and assembly, though here the pin functions differ despite the same outline. |
| Supply Voltage Range | 2.7 V to 5.5 V single supply | 2.7 V to 5.5 V single supply | Both operate over the same supply range, but this alone does not make them interchangeable given their different functions. |
| Signal Path / Interface | Analog RF input, analog logarithmic voltage output | Serial digital input (SPI-compatible), analog voltage output | The input/output signal domains are incompatible, so they cannot be swapped in a design. |
| Frequency / Update Rate | DC to 500 MHz input bandwidth | Serial clock up to 5 MHz (update rate) | One processes high-frequency RF signals while the other updates a DAC via a digital serial bus, reflecting entirely different use cases. |
| Key Performance Metric | 90 dB dynamic range, logarithmic conformance ±1 dB | 12-bit resolution, ±1 LSB differential nonlinearity | The performance specifications address different functions (RF power measurement vs. digital-to-analog conversion). |
| Operating Temperature Range | -40°C to +85°C | -40°C to +85°C | Both share the same industrial temperature range, but this does not imply functional equivalence. |
| Typical Application | RF power measurement, RSSI, signal strength indication | Digital gain/offset control, programmable voltage generation | Their intended applications are unrelated, confirming they serve different roles in a system. |
Need help validating a replacement?
Send your BOM and application constraints for technical and sourcing review.
Full specification comparison
Use manufacturer datasheets as the final authority.
| Specification | AD8307AR | AD8300AR |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Obsolete | Obsolete |
| Number of Bits | - | 12 |
| Number of D/A Converters | - | 1 |
| Settling Time | - | 14µs (Typ) |
| Output Type | - | Voltage - Buffered |
| Differential Output | - | No |
| Data Interface | - | SPI, DSP |
| Reference Type | - | Internal |
| Voltage - Supply, Analog | - | 2.7V ~ 5.5V |
| Voltage - Supply, Digital | - | 2.7V ~ 5.5V |
| INL / DNL(LSB) | - | ±0.5, ±0.5 |
| Architecture | - | R-2R |
| Operating Temperature | - | -40°C ~ 85°C |
| Type | Logarithmic Amplifier | - |
| Applications | Receiver Signal Strength Indication (RSSI) | - |
| Mounting Type | Surface Mount | - |
Frequently asked questions
Are the AD8307AR and AD8300AR functionally interchangeable?
No. The AD8307AR is a 500 MHz, 92 dB logarithmic amplifier (log amp) that converts an AC signal to a decibel-scaled DC output, while the AD8300AR is a complete 12-bit digital-to-analog converter (DAC) with an internal reference. They perform fundamentally different functions and are not interchangeable.
What are the primary functions of the AD8307AR and AD8300AR?
The AD8307AR is a monolithic logarithmic amplifier/detector providing a DC output proportional to the logarithm of the input signal amplitude, used for RSSI and signal strength measurement. The AD8300AR is a 12-bit voltage-output DAC that converts digital input codes into an analog output voltage.
Do the AD8307AR and AD8300AR use the same package and pinout?
Both devices are offered in an 8-lead SOIC (R-8) package, but their pin functions differ. The AD8307AR pinout includes inputs, logarithmic output, and power supply pins, whereas the AD8300AR pinout includes digital input, reference, and analog output pins. They are not pin-compatible.
What are the key performance specifications of the AD8307AR?
The AD8307AR operates over a 500 MHz bandwidth with a 92 dB dynamic range, providing a nominal 25 mV/dB logarithmic slope and a typical logarithmic intercept of -84 dBm. It operates from a single 2.7 V to 5.5 V supply.
What are the key performance specifications of the AD8300AR?
The AD8300AR is a 12-bit DAC with a settling time of 8 µs to 0.5 LSB, an internal 2.5 V reference, and a voltage output range of 0 V to 2.5 V. It operates from a single 2.7 V to 5.5 V supply and is specified for monotonicity over temperature.
Can the AD8307AR and AD8300AR share the same power supply rail in a design?
Yes, both devices operate from a single supply in the 2.7 V to 5.5 V range, so they can share a common supply rail. However, each device requires its own appropriate decoupling and the designer must verify total supply current and noise budgets against the system requirements.
In what applications would the AD8307AR be used versus the AD8300AR?
The AD8307AR is used in RF/IF signal strength indication (RSSI), received signal strength measurement, and logarithmic detection in communications receivers. The AD8300AR is used in digital-to-analog conversion applications such as gain control, offset adjustment, and general-purpose voltage output control where a 12-bit DAC is required.