AD8421BRZ vs AD8422ARZ-RL

Dieser detaillierte Vergleich von AD8421BRZ und AD8422ARZ-RL bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD8421BRZ and AD8422ARZ-RL are both precision instrumentation amplifiers from Analog Devices sharing a functionally equivalent pinout and gain architecture, making the AD8422ARZ-RL a viable functional replacement candidate for the AD8421BRZ in many designs. However, the two parts differ in supply voltage range, bandwidth, and noise performance, so the substitution should be validated against the specific application's signal chain requirements before adoption.

Supply Voltage Range Validation required
Bandwidth Validation required
Input Voltage Noise Validation required
Package Type High match

Parts at a glance

Part A

AD8421BRZ

Analog Devices Inc.

Lifecycle
Active
Stock
1263 Stückzahl
Package
SOIC-8
Series
Linear-Verstärker.Instrumentation, OP-Verstärker, Pufferverstärker
Part B

AD8422ARZ-RL

Analog Devices Inc.

Lifecycle
Active
Stock
9390 Stückzahl
Package
SOIC-8
Series
Linear-Verstärker.Instrumentation, OP-Verstärker, Pufferverstärker

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8421BRZ AD8422ARZ-RL Why it matters
Number of Channels 1 1 Both are single-channel instrumentation amplifiers, so channel count is functionally equivalent.
Gain Bandwidth Product (GBP) 10 MHz 2.2 MHz Higher GBP allows the AD8421 to maintain accurate gain at higher signal frequencies, affecting bandwidth-critical designs.
Input Voltage Noise (1 kHz) 3 nV/√Hz 8 nV/√Hz Lower input noise improves signal-to-noise ratio for low-level sensor signals; the AD8421 is notably quieter.
Input Offset Voltage (max) 60 µV 70 µV Offset voltage directly adds DC error to the amplified signal; lower offset yields better DC accuracy.
Supply Voltage Range ±2.5 V to ±18 V (5 V to 36 V) ±2.3 V to ±18 V (4.6 V to 36 V) The slightly wider low-end supply range of the AD8422 allows operation at marginally lower supply voltages.
Quiescent Supply Current 2.3 mA 0.3 mA Lower quiescent current in the AD8422 makes it preferable for power-sensitive or battery-powered applications.
CMRR (DC, G=1000) 134 dB 126 dB Higher common-mode rejection suppresses interference; the AD8421 offers better rejection of common-mode noise.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Identical temperature ratings mean both suit the same industrial operating environments.
Package 8-Lead SOIC 8-Lead SOIC Same package and pinout enable drop-in board compatibility between the two parts.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8421BRZ AD8422ARZ-RL
Supplier - Analog Devices Inc.
Part Status Active Active
Amplifier Type Instrumentation Instrumentation
Number of Circuits 1 1
Output Type - Rail-to-Rail
Slew Rate 35V/µs 0.8V/µs
-3 dB Bandwidth 10 MHz 2.2 MHz
Current - Input Bias 100 pA 500 pA
Voltage - Input Offset 25 µV 60 µV
Supply Current 2mA 300µA
Current - Output / Channel 65 mA 20 mA
Voltage - Supply Span(Min) 5 V 4.6 V
Voltage - Supply Span(Max) 36 V 36 V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the key differences between the AD8421BRZ and AD8422ARZ-RL instrumentation amplifiers?

The AD8421BRZ is a high-speed, low-power instrumentation amplifier with a typical gain bandwidth product of 10 MHz and a slew rate of 35 V/µs, housed in an 8-lead SOIC package. The AD8422ARZ-RL is a lower-power, precision instrumentation amplifier with a typical gain bandwidth of 2.2 MHz and a slew rate of 0.8 V/µs, supplied in an 8-lead SOIC on tape and reel. The AD8421BRZ is optimized for higher bandwidth and faster settling, while the AD8422ARZ-RL targets lower power consumption and precision DC performance.

Are the AD8421BRZ and AD8422ARZ-RL pin-compatible?

Both devices are offered in an 8-lead SOIC package with the same pinout (gain resistor pins, -IN, +IN, V-, REF, VOUT, V+), so they are pin-compatible at the package level. However, pin compatibility does not guarantee electrical interchangeability; supply range, gain setting, bandwidth, and offset specifications must be verified against the respective datasheets for the target design.

How do the supply voltage ranges of the AD8421BRZ and AD8422ARZ-RL compare?

The AD8421BRZ operates from a dual supply of ±2.5 V to ±18 V (or a single supply of 5 V to 36 V). The AD8422ARZ-RL operates from a dual supply of ±2.3 V to ±18 V (or a single supply of 4.6 V to 36 V). Both support a wide industrial supply range, but the AD8422ARZ-RL allows a slightly lower minimum supply voltage.

Which device offers lower power consumption, the AD8421BRZ or the AD8422ARZ-RL?

The AD8422ARZ-RL is the lower-power option, with a typical quiescent supply current of approximately 300 µA. The AD8421BRZ typically draws about 2.3 mA. For battery-powered or power-sensitive designs, the AD8422ARZ-RL is generally preferred, while the AD8421BRZ trades higher supply current for greater bandwidth and faster slew rate.

How do the gain bandwidth and slew rate of the AD8421BRZ and AD8422ARZ-RL differ?

The AD8421BRZ provides a typical gain bandwidth product of 10 MHz and a slew rate of 35 V/µs, making it suitable for higher-frequency signal conditioning. The AD8422ARZ-RL provides a typical gain bandwidth product of 2.2 MHz and a slew rate of 0.8 V/µs, which is adequate for lower-frequency precision applications. The AD8421BRZ is therefore the better choice when dynamic performance and fast settling are required.

What are the gain-setting configurations for the AD8421BRZ and AD8422ARZ-RL?

Both devices use a single external resistor between the RG pins to set gain. For the AD8421BRZ, gain is set by G = 1 + (9.9 kΩ / RG). For the AD8422ARZ-RL, gain is set by G = 1 + (19.8 kΩ / RG). Because the internal gain resistors differ, the same external RG value produces different gains on the two devices, so gain resistor values must be recalculated when substituting.

How do the input offset voltage and drift specifications compare between the AD8421BRZ and AD8422ARZ-RL?

The AD8421BRZ (B grade) specifies a maximum input offset voltage of 60 µV with a typical offset drift of 0.2 µV/°C. The AD8422ARZ-RL (A grade) specifies a maximum input offset voltage of 150 µV with a typical offset drift of 0.3 µV/°C. The AD8421BRZ offers tighter offset and drift specifications, while the AD8422ARZ-RL provides good precision at lower power.

Can the AD8422ARZ-RL be used as a direct drop-in replacement for the AD8421BRZ?

Not without design verification. Although both are 8-lead SOIC devices with the same pinout, they differ in gain equation (9.9 kΩ versus 19.8 kΩ internal RG), bandwidth (10 MHz versus 2.2 MHz), slew rate (35 V/µs versus 0.8 V/µs), quiescent current (2.3 mA versus 300 µA), and offset specifications. The gain resistor, supply decoupling, and dynamic performance requirements must be re-evaluated against the AD8422ARZ-RL datasheet before substitution.