AD8429BRZ
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 6879 Stückzahl
- Package
- SOIC-8
- Series
- Linear-Verstärker.Instrumentation, OP-Verstärker, Pufferverstärker
Dieser detaillierte Vergleich von AD8429BRZ und AD8421BRZ-RL bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.
Replacement verdict
The AD8429BRZ and AD8421BRZ-RL are both precision instrumentation amplifiers in the same SOIC-8 package with identical pinout, gain-setting architecture, and supply range, making them strong functional replacement candidates. The AD8429BRZ offers lower voltage noise and higher bandwidth, while the AD8421BRZ-RL provides lower input bias current and lower power consumption; selection should be validated against the specific noise, bandwidth, and bias-current requirements of the target design.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8429BRZ | AD8421BRZ-RL | Why it matters |
|---|---|---|---|
| Input Voltage Noise (1 kHz, G=1) | 1 nV/√Hz | 3 nV/√Hz | Lower input voltage noise improves signal-to-noise ratio for low-level sensor signals, making the AD8429BRZ preferable for very low-noise applications. |
| Gain Bandwidth Product (G=1) | 15 MHz | 10 MHz | Higher bandwidth allows the amplifier to handle faster-changing signals and wider frequency content without attenuation. |
| Input Bias Current | 150 nA (max) | 500 pA (max) | Much lower input bias current in the AD8421BRZ-RL reduces errors in high-impedance source applications, while the AD8429BRZ requires lower source impedance. |
| Input Offset Voltage (max) | 50 µV | 60 µV | Lower offset voltage reduces DC error at the output, important for precision measurement of small differential signals. |
| CMRR (G=1, DC to 60 Hz) | 80 dB (min) | 80 dB (min) | Common-mode rejection determines how well the amplifier rejects unwanted common-mode signals; both parts offer similar minimum CMRR at unity gain. |
| Supply Voltage Range | ±4 V to ±18 V | ±2.5 V to ±18 V | The AD8421BRZ-RL supports lower supply voltages, enabling use in low-power or battery-operated systems where the AD8429BRZ cannot operate. |
| Quiescent Supply Current (max) | 6.5 mA | 2.3 mA | Lower quiescent current in the AD8421BRZ-RL reduces power consumption, which is critical for portable and power-sensitive designs. |
| Operating Temperature Range | -40°C to +125°C | -40°C to +85°C | The wider temperature range of the AD8429BRZ allows operation in harsher environments such as industrial and automotive applications. |
| Package | 8-Lead SOIC | 8-Lead SOIC | Identical package and pinout allow direct drop-in replacement on an existing PCB footprint. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD8429BRZ | AD8421BRZ-RL |
|---|---|---|
| Supplier | - | Analog Devices Inc. |
| Part Status | Active | Active |
| Amplifier Type | Instrumentation | Instrumentation |
| Number of Circuits | 1 | 1 |
| Slew Rate | 22V/µs | 35V/µs |
| -3 dB Bandwidth | 15 MHz | 10 MHz |
| Current - Input Bias | 150 nA | 100 pA |
| Voltage - Input Offset | 50 µV | 25 µV |
| Supply Current | 6.7mA | 2mA |
| Current - Output / Channel | 35 mA | 65 mA |
| Voltage - Supply Span(Min) | 8 V | 5 V |
| Voltage - Supply Span(Max) | 36 V | 36 V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
The AD8429BRZ is a low-noise instrumentation amplifier optimized for ultra-low noise (1 nV/√Hz) with a gain range of 1 to 10,000, while the AD8421BRZ-RL is a lower-power, lower-cost instrumentation amplifier with 3 nV/√Hz noise and a gain range of 1 to 10,000. The AD8429 is specified for lower noise and higher bandwidth, whereas the AD8421 offers lower supply current and is supplied in a tape-and-reel packaging option (RL suffix).
Yes, both devices are offered in the same 8-lead SOIC package (R-8) with identical pin functions, allowing them to share the same PCB footprint. However, designers must verify that the electrical differences (noise, bandwidth, supply current, and gain accuracy) are acceptable for the target application before substituting one for the other.
The AD8429BRZ has a lower input voltage noise density of 1 nV/√Hz at 1 kHz, compared to 3 nV/√Hz at 1 kHz for the AD8421BRZ-RL. The AD8429 is therefore better suited for precision low-level signal acquisition where noise floor is critical.
The AD8421BRZ-RL draws a lower typical supply current of approximately 2.3 mA, while the AD8429BRZ draws approximately 4.5 mA typical. Designs with tight power budgets should account for this difference when selecting between the two parts.
The AD8429BRZ has a gain bandwidth product of 15 MHz, and the AD8421BRZ-RL has a gain bandwidth product of 10 MHz. Both devices support gains from 1 to 10,000, but the AD8429 provides wider closed-loop bandwidth at a given gain.
The "RL" suffix denotes tape-and-reel packaging, which is intended for high-volume automated assembly. The AD8429BRZ is supplied in standard tube packaging. The electrical performance of the AD8421BRZ-RL is identical to the standard AD8421BRZ; only the packaging and shipment format differ.
Because both parts share the same 8-lead SOIC pinout, the AD8421BRZ-RL can be placed on the same footprint. However, it is not a direct drop-in replacement in terms of performance: the higher input noise (3 nV/√Hz vs. 1 nV/√Hz), lower gain bandwidth (10 MHz vs. 15 MHz), and different supply current must be validated against the application requirements before substitution.
The AD8429BRZ specifies a CMRR of 120 dB minimum at G = 1 (typical 130 dB), while the AD8421BRZ-RL specifies a CMRR of 114 dB minimum at G = 1 (typical 120 dB). Both provide high common-mode rejection suitable for precision instrumentation, with the AD8429 offering a higher guaranteed minimum.