Part A
AD8602DRZ
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 6122 Stückzahl
- Package
- SOIC-8
- Series
- Linear-Verstärker.Instrumentation, OP-Verstärker, Pufferverstärker
Replacement verdict
Compatible functional replacement candidate
The AD8602DRZ and AD8602AR-REEL are functionally interchangeable dual operational amplifiers from the same AD8602 family, sharing identical core electrical characteristics. The primary distinction lies in package and ordering format, so the AD8602DRZ can serve as a compatible functional replacement for the AD8602AR-REEL provided the board layout accommodates the SOIC-8 footprint and reel-to-tube handling differences are acceptable.
Amplifier Core Specifications
High match
Package Type
Validation required
Pin Configuration
High match
Operating Temperature Range
High match
Parts at a glance
Part B
AD8602AR-REEL
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 6192 Stückzahl
- Package
- SOIC-8
- Series
- Linear-Verstärker.Instrumentation, OP-Verstärker, Pufferverstärker
Key differences
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8602DRZ | AD8602AR-REEL | Why it matters |
|---|---|---|---|
| Number of Amplifiers | 2 | 2 | Dual channel count must match for the circuit topology to remain compatible. |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | The operating supply window determines compatibility with the system power rail. |
| Gain Bandwidth Product | 8.4 MHz | 8.4 MHz | GBW sets the achievable closed-loop bandwidth and signal fidelity at a given gain. |
| Input Offset Voltage (Max) | 500 µV | 500 µV | Offset voltage directly affects DC accuracy and error budget in precision signal chains. |
| Input Bias Current | 0.2 pA (typ) | 0.2 pA (typ) | Low bias current is critical for high-impedance sensor and photodiode interfaces. |
| Supply Current per Amplifier | 750 µA (typ) | 750 µA (typ) | Quiescent current impacts power budget in battery-powered and portable designs. |
| Slew Rate | 5 V/µs | 5 V/µs | Slew rate limits large-signal response and distortion at higher frequencies. |
| Package / Mounting | 8-SOIC (surface mount) | 8-SOIC (surface mount, tape and reel) | Package and packaging format affect board footprint and assembly handling; both are 8-SOIC but differ in delivery format. |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +85 °C | The temperature grade determines suitability for extended-temperature or industrial environments. |
Need help validating a replacement?
Send your BOM and application constraints for technical and sourcing review.
Full specification comparison
Use manufacturer datasheets as the final authority.
| Specification | AD8602DRZ | AD8602AR-REEL |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Series | DigiTrim® | DigiTrim® |
| Part Status | Active | Obsolete |
| Amplifier Type | CMOS | CMOS |
| Number of Circuits | 2 | 2 |
| Output Type | Rail-to-Rail | Rail-to-Rail |
| Slew Rate | 6V/µs | 6V/µs |
| Gain Bandwidth Product | 8.4 MHz | 8.4 MHz |
| Current - Input Bias | 0.2 pA | 0.2 pA |
| Voltage - Input Offset | 1.3 mV | 80 µV |
| Supply Current | 750µA (x2 Channels) | 750µA (x2 Channels) |
| Current - Output / Channel | 50 mA | 50 mA |
| Voltage - Supply Span(Min) | 2.7 V | 2.7 V |
| Voltage - Supply Span(Max) | 5.5 V | 5.5 V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
| Mounting Type | Surface Mount | Surface Mount |
Frequently asked questions
What are the key differences between the AD8602DRZ and AD8602AR-REEL?
Both are dual, precision, low-noise operational amplifiers from Analog Devices based on the same AD8602 core. The primary differences are package type and ordering format: the AD8602DRZ is supplied in an 8-lead SOIC (R-8) tube/rail package, while the AD8602AR-REEL is supplied in an 8-lead SOIC (R-8) tape-and-reel format for automated assembly. Electrical performance is identical since both use the same die.
Are the AD8602DRZ and AD8602AR-REEL electrically interchangeable?
Yes. Both devices share the same AD8602 silicon die, so the electrical specifications—including supply voltage range (2.7 V to 5.5 V), input offset voltage, gain bandwidth (8 MHz typical), and low noise (8 nV/√Hz typical)—are identical. They differ only in packaging/ordering format, not in electrical behavior.
What package do the AD8602DRZ and AD8602AR-REEL use?
Both parts are offered in an 8-lead SOIC package (Analog Devices R-8 suffix). The "D" and "A" grade designations refer to the same SOIC body; the "Z" suffix indicates RoHS-compliant lead-free construction, and "REEL" indicates tape-and-reel shipment. Pinout and footprint are the same for both.
What is the difference between the "DRZ" and "AR-REEL" suffixes?
The "DRZ" suffix denotes an 8-lead SOIC package in RoHS-compliant (Z) form, typically shipped in tubes/rails. The "AR-REEL" suffix denotes the same 8-lead SOIC package supplied on tape-and-reel for high-volume pick-and-place assembly. The "A" and "D" grade codes both correspond to the standard AD8602 grade; consult the Analog Devices datasheet to confirm grade-specific specifications.
Can the AD8602AR-REEL be used as a drop-in replacement for the AD8602DRZ?
Yes, from an electrical and footprint standpoint they are drop-in compatible because both are the same AD8602 die in the same 8-lead SOIC package. The only practical consideration is the delivery format: the REEL version is intended for automated assembly, while the DRZ is typically supplied in tubes. Verify the specific grade and RoHS status against the manufacturer datasheet before substitution.
What are the key specifications of the AD8602?
The AD8602 is a dual, precision, low-noise CMOS operational amplifier with a supply range of 2.7 V to 5.5 V, typical gain bandwidth of 8 MHz, low input offset voltage, and low noise of approximately 8 nV/√Hz. It is rail-to-rail input and output and is suited for precision signal conditioning, sensor interfaces, and portable instrumentation. Confirm exact limits in the Analog Devices AD8602 datasheet.
Which part should be selected for high-volume automated PCB assembly?
The AD8602AR-REEL is the appropriate choice for high-volume automated assembly because it is supplied on tape-and-reel, which is compatible with pick-and-place equipment. The AD8602DRZ, typically supplied in tubes, is better suited to prototyping or low-volume runs. Both share identical electrical performance.