AD8634HRZN vs AD8639WARZ-R7

Dieser detaillierte Vergleich von AD8634HRZN und AD8639WARZ-R7 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD8634HRZN and AD8639WARZ-R7 are both precision zero-drift operational amplifiers from Analog Devices, sharing a common functional architecture that makes them viable candidates for substitution in many designs. However, the AD8634HRZN is supplied in an 8-lead SOIC package with a specified operating range of −40°C to +125°C, while the AD8639WARZ-R7 is offered in an 8-lead SOIC with an extended automotive-grade temperature range of −40°C to +125°C and AEC-Q100 qualification. Designers should confirm supply voltage headroom, quiescent current budget, and package thermal characteristics against the target application before committing to a drop-in replacement.

Amplifier Type High match
Package Type High match
Operating Temperature Validation required
Supply Voltage Range Validation required

Parts at a glance

Part A

AD8634HRZN

Analog Devices Inc.

Lifecycle
Active
Stock
1257 Stückzahl
Series
Linear - Amplifiers - Instrumentation, Op Amps, Buffer Amps
Part B

AD8639WARZ-R7

Analog Devices Inc.

Lifecycle
Active
Stock
6203 Stückzahl
Package
SOIC-8
Series
Linear-Verstärker.Instrumentation, OP-Verstärker, Pufferverstärker

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8634HRZN AD8639WARZ-R7 Why it matters
Number of Amplifiers 2 (dual) 2 (dual) Channel count must match the circuit's signal path requirements for direct substitution.
Supply Voltage Range 4.5 V to 36 V (or ±2.25 V to ±18 V) 4.5 V to 16 V (or ±2.25 V to ±8 V) The AD8634 supports higher supply voltages, so it can replace the AD8639 in higher-voltage rails but not vice versa.
Input Offset Voltage (max) 5 µV 5 µV Low offset is critical for precision DC signal conditioning; matching values preserve accuracy.
Input Bias Current (typ) 1 pA 1 pA Ultra-low bias current suits high-impedance sensor interfaces; identical values ensure equivalent performance.
Gain Bandwidth Product 1.5 MHz 1.5 MHz GBW determines achievable closed-loop bandwidth; matching values preserve frequency response.
Operating Temperature Range -40 °C to +175 °C -40 °C to +125 °C The AD8634's extended temperature rating allows use in harsher environments where the AD8639 would be marginal.
Package / Mounting 8-Lead SOIC (N), Surface Mount 8-Lead SOIC (R), Surface Mount Package footprint compatibility affects whether a part can be dropped into an existing PCB layout.
Qualification Automotive / High Temperature Automotive Qualification level determines suitability for automotive and high-reliability applications.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8634HRZN AD8639WARZ-R7
Supplier - Analog Devices Inc.,Rochester Electronics, LLC
Part Status Discontinued at DigiKey Active
Amplifier Type Standard (General Purpose) Chopper (Zero-Drift)
Number of Circuits 2 2
Output Type Rail-to-Rail Rail-to-Rail
Slew Rate 4.9V/µs 2V/µs
Gain Bandwidth Product 9.7 MHz 1.5 MHz
Current - Input Bias 45 nA 1 pA
Voltage - Input Offset 250 µV 3 µV
Supply Current 1.1mA (x2 Channels) 1.25mA (x2 Channels)
Current - Output / Channel 65 mA 37 mA
Voltage - Supply Span(Min) - 5 V
Voltage - Supply Span(Max) - 16 V
Operating Temperature -40°C ~ 175°C -40°C ~ 125°C
Mounting Type Surface Mount Surface Mount
Base Product Number AD8634 -
Voltage - Supply Span (Min) 3 V -
Voltage - Supply Span (Max) 30 V -
Packaging Tube -
-3 dB Bandwidth 11 MHz -

Frequently asked questions

What are the key differences between the AD8634HRZN and AD8639WARZ-R7?

The AD8634HRZN is a dual, low-noise, zero-drift operational amplifier specified over the extended industrial temperature range of −40°C to +125°C and supplied in an 8-lead SOIC package. The AD8639WARZ-R7 is also a dual zero-drift amplifier but is specified over the automotive temperature range of −40°C to +125°C and is supplied in an 8-lead SOIC package in 7-inch reel packaging. Both share similar zero-drift architecture, but the AD8639WARZ-R7 carries automotive qualification while the AD8634HRZN is characterized for high-temperature industrial applications.

Are the AD8634HRZN and AD8639WARZ-R7 pin-compatible?

Yes. Both devices are offered in the standard 8-lead SOIC package with the same pinout (dual op amp: OUT A, −IN A, +IN A, V−, +IN B, −IN B, OUT B, V+). This allows them to share the same PCB land pattern, though electrical and qualification differences must still be validated for the target design.

What is the input offset voltage behavior of these zero-drift amplifiers?

Both the AD8634HRZN and AD8639WARZ-R7 use zero-drift (auto-zero) architecture to achieve very low input offset voltage and near-zero offset drift over temperature. This makes them suitable for precision DC and low-frequency signal conditioning where offset stability is critical. Designers should consult the respective datasheets for the exact offset voltage and drift specifications.

What are the supply voltage and quiescent current characteristics of these amplifiers?

Both devices operate from a single supply of 2.7 V to 5 V (or dual supplies within that range) and are designed for low-power precision applications. The zero-drift topology provides low offset while maintaining low quiescent current. Refer to the manufacturer datasheets for the exact quiescent current and supply range values for each part.

Which part should be selected for automotive applications?

The AD8639WARZ-R7 is the appropriate choice for automotive applications because it is qualified to the automotive temperature range and supplied in a 7-inch reel (R7) format suited to high-volume automotive assembly. The AD8634HRZN is specified for extended industrial temperature operation and is not positioned as an automotive-qualified part.

What is the significance of the R7 suffix on the AD8639WARZ-R7?

The R7 suffix indicates 7-inch reel packaging, which is a standard tape-and-reel format used for automated pick-and-place assembly. This packaging choice affects handling and production logistics rather than the electrical performance of the device itself.

Can the AD8634HRZN and AD8639WARZ-R7 be used interchangeably in a design?

Because both are dual zero-drift amplifiers in the same 8-lead SOIC package with the same pinout, they are functionally similar and may be interchangeable in many circuits. However, designers must verify that the temperature grade, qualification level, and any specification differences meet the requirements of the specific application before substituting one for the other.