AD9220ARSZ
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 2918 Stückzahl
- Package
- SSOP-28
- Series
- Datenerfassung mit Analog to Digital Converters (ADC)
Dieser detaillierte Vergleich von AD9220ARSZ und AD9226ARS bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.
Replacement verdict
The AD9226ARS is a viable functional replacement candidate for the AD9220ARSZ in many 12-bit ADC applications, sharing identical resolution, package, and pinout. However, designers must validate the higher sampling rate, increased power consumption, and differing analog input architecture against their specific system requirements before substitution.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD9220ARSZ | AD9226ARS | Why it matters |
|---|---|---|---|
| Resolution | 12 bits | 12 bits | Both converters provide 12-bit resolution, so quantization noise floor and nominal dynamic range are comparable. |
| Maximum Sampling Rate | 10 MSPS | 65 MSPS | The AD9226 supports a much higher Nyquist bandwidth, enabling digitization of faster signals that the AD9220 cannot handle. |
| Input Type | Differential (with internal sample-and-hold) | Differential (with internal sample-and-hold) | Both accept differential inputs, allowing similar analog front-end design and common-mode rejection behavior. |
| Supply Voltage | 5 V analog and digital | 5 V analog and digital | Identical single 5 V supply simplifies power rail reuse when substituting one part for the other. |
| Power Consumption | ~85 mW typical | ~475 mW typical | The AD9226 dissipates substantially more power, which affects thermal design and supply current budgeting. |
| SNR (Signal-to-Noise Ratio) | ~70 dB | ~69 dB | Similar SNR indicates comparable noise performance, though exact values depend on input frequency and conditions. |
| Output Interface | Parallel CMOS | Parallel CMOS | Both use parallel CMOS outputs, so the digital interface to an FPGA or DSP is functionally compatible. |
| Package | 28-lead SSOP | 28-lead SSOP | Identical package and pinout allow drop-in board replacement without layout changes. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Matching industrial temperature ranges ensure equivalent environmental robustness in the target application. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD9220ARSZ | AD9226ARS |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Number of Bits | 12 | 12 |
| Sampling Rate(Per Second) | 10M | 65M |
| Number of Inputs | 1 | 1 |
| Input Type | Differential, Single Ended | Differential, Single Ended |
| Data Interface | Parallel | Parallel |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | Pipelined | Pipelined |
| Reference Type | External, Internal | External, Internal |
| Voltage - Supply, Analog | 5V | 5V |
| Voltage - Supply, Digital | 2.7V ~ 5.25V | 2.85V ~ 5.25V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The AD9220ARSZ is a 12-bit, 10 MSPS analog-to-digital converter, while the AD9226ARS is a 12-bit, 65 MSPS ADC. Both are monolithic pipelined ADCs from Analog Devices in a 28-lead SSOP package, but the AD9226ARS offers a significantly higher maximum sampling rate and correspondingly higher power consumption than the AD9220ARSZ.
Both devices are offered in the same 28-lead SSOP (RS) package, and their pinouts are functionally similar as members of the same Analog Devices pin-compatible ADC family. However, designers should verify the specific pin functions and any differences in the datasheets before substituting one for the other in an existing layout.
The AD9220ARSZ has a maximum sampling rate of 10 MSPS, while the AD9226ARS supports a maximum sampling rate of 65 MSPS. The higher throughput of the AD9226ARS makes it suitable for wider-bandwidth signal acquisition applications.
The AD9220ARSZ typically dissipates about 250 mW at 10 MSPS, whereas the AD9226ARS typically dissipates about 475 mW at 65 MSPS. The higher power of the AD9226ARS reflects its higher sampling rate and analog bandwidth.
Yes. Both the AD9220ARSZ and the AD9226ARS operate from a single 5 V analog supply and a 3 V to 5 V digital output supply, allowing flexible interfacing to digital logic. Designers should confirm the exact supply tolerances in the respective datasheets.
Both devices provide 12-bit resolution and accept a differential analog input. The AD9220ARSZ and AD9226ARS are pipelined architectures with on-chip sample-and-hold circuitry, making them suitable for high-speed signal digitization.
No. The AD9220ARSZ is limited to 10 MSPS and cannot support a 65 MSPS sampling requirement. Substituting it into an AD9226ARS design would violate the required throughput and likely degrade system performance, so the AD9226ARS should be retained where 65 MSPS operation is needed.
The AD9220ARSZ is better suited for low-power, lower-speed applications because it consumes roughly half the power of the AD9226ARS while providing 12-bit resolution at up to 10 MSPS. The AD9226ARS is intended for applications requiring higher sampling rates.