AD9280ARSZRL vs AD9283BRSZ-80

Dieser detaillierte Vergleich von AD9280ARSZRL und AD9283BRSZ-80 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The AD9283BRSZ-80 and AD9280ARSZRL are not drop-in replacements for each other. Although both are 8-bit analog-to-digital converters, they differ in resolution architecture, sampling rate, package footprint, and supply configuration, so a direct board-level substitution is not feasible without redesign.

Different sampling rate Different package footprint Different supply voltage Different input architecture

Parts at a glance

Part A

AD9280ARSZRL

Analog Devices Inc.

Lifecycle
Active
Stock
4547 Stückzahl
Series
Datenerfassung mit Analog to Digital Converters (ADC)
Part B

AD9283BRSZ-80

Analog Devices Inc.

Lifecycle
Active
Stock
1406 Stückzahl
Package
SSOP-20
Series
Datenerfassung mit Analog to Digital Converters (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD9283BRSZ-80 AD9280ARSZRL Why it matters
Resolution 8 bit 8 bit Both are 8-bit ADCs, so quantization resolution is equivalent for substitutability.
Sampling Rate 80 MSPS 32 MSPS The maximum conversion rate determines the input bandwidth the ADC can support; the AD9283 is over twice as fast.
Number of Input Channels 1 1 Both are single-channel ADCs, so channel count does not affect substitutability.
Input Type Differential Single-ended Differential vs single-ended input affects the analog front-end design and achievable noise/linearity performance.
Supply Voltage 3.0 V (2.7 V to 3.6 V) 5.0 V (2.7 V to 5.5 V) Supply voltage compatibility with the surrounding system is critical; the AD9280 supports a wider and higher supply range.
Package / Mounting 28-Lead SSOP 28-Lead SSOP Identical package and footprint allow direct board-level drop-in replacement.
Output Interface Parallel CMOS Parallel CMOS Matching parallel CMOS output simplifies digital interface reuse between the two parts.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Equivalent industrial temperature range means both suit the same environmental conditions.
Power Consumption ~90 mW typical ~100 mW typical Power budget differences affect thermal design and supply sizing in power-sensitive applications.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD9280ARSZRL AD9283BRSZ-80
Part Status Active Active
Base Product Number AD9280 -
Number of Bits 8 8
Sampling Rate (Per Second) 32M -
Number of Inputs 1 1
Input Type Differential, Single Ended Differential, Single Ended
Data Interface Parallel Parallel
Configuration S/H-ADC S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A / D Converters 1 -
Architecture Pipelined Pipelined
Reference Type External Internal
Voltage - Supply, Analog 2.7V ~ 5.5V 2.7V ~ 3.6V
Voltage - Supply, Digital 2.7V ~ 5.5V 2.7V ~ 3.6V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Mounting Type Surface Mount -
Packaging Cut Tape (CT), Tape & Reel (TR) -
Sampling Rate(Per Second) - 80M
Number of A/D Converters - 1

Frequently asked questions

What are the key differences between the AD9283BRSZ-80 and the AD9280ARSZRL?

The AD9283BRSZ-80 is an 8-bit, 80 MSPS analog-to-digital converter packaged in a 20-lead SSOP, while the AD9280ARSZRL is an 8-bit, 32 MSPS ADC packaged in a 28-lead SSOP. The AD9283BRSZ-80 offers a higher maximum sampling rate (80 MSPS vs. 32 MSPS), whereas the AD9280ARSZRL provides a higher typical signal-to-noise ratio and includes an on-chip reference and programmable input range features. Both are 8-bit ADCs from Analog Devices but target different speed and resolution-of-input requirements.

Are the AD9283BRSZ-80 and AD9280ARSZRL pin-compatible?

No. The AD9283BRSZ-80 uses a 20-lead SSOP package, while the AD9280ARSZRL uses a 28-lead SSOP package. The different pin counts and package footprints mean they are not pin-compatible and cannot be dropped into the same PCB land pattern without redesign.

What is the maximum sampling rate of each device?

The AD9283BRSZ-80 has a maximum sampling rate of 80 MSPS. The AD9280ARSZRL has a maximum sampling rate of 32 MSPS. The AD9283BRSZ-80 is therefore suited to higher-speed signal chains, while the AD9280ARSZRL targets lower-speed, higher-accuracy applications.

What is the resolution and typical SNR of these ADCs?

Both devices are 8-bit ADCs. The AD9280ARSZRL is specified with a typical signal-to-noise ratio of approximately 49 dB for a 1 MHz input, reflecting its design emphasis on accuracy at lower sample rates. The AD9283BRSZ-80 is optimized for high-speed conversion at up to 80 MSPS; designers should consult the respective datasheets for the exact SNR specification at the intended input frequency and sample rate.

Do these ADCs include an on-chip voltage reference?

The AD9280ARSZRL includes an on-chip reference and programmable input range, which simplifies the analog front-end design. The AD9283BRSZ-80 is designed for high-speed operation and its reference configuration should be verified against the manufacturer datasheet for the specific application. Designers should confirm reference requirements before finalizing the analog input network.

What are the typical applications for each device?

The AD9283BRSZ-80, with its 80 MSPS maximum rate, is typically used in high-speed data acquisition, digital oscilloscopes, and communications receive paths where fast sampling is required. The AD9280ARSZRL, at 32 MSPS with an on-chip reference and programmable input range, is typically used in imaging, instrumentation, and lower-speed signal processing applications where accuracy and input flexibility are prioritized.

Can the AD9283BRSZ-80 be used as a direct replacement for the AD9280ARSZRL?

No. Beyond the different package and pin count (20-lead SSOP vs. 28-lead SSOP), the two devices differ in maximum sampling rate (80 MSPS vs. 32 MSPS) and feature set (the AD9280ARSZRL includes an on-chip reference and programmable input range). A direct replacement is not possible without PCB redesign and validation of the analog front-end and timing requirements against the manufacturer datasheets.

What supply voltage and interface do these ADCs use?

Both the AD9283BRSZ-80 and AD9280ARSZRL are 8-bit ADCs from Analog Devices that operate from a single 3 V supply and provide a parallel CMOS-compatible digital output. Designers should verify the exact supply range, output drive levels, and timing specifications in the respective manufacturer datasheets before finalizing the digital interface.