ADA4077-1ARZ
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 5601 Stückzahl
- Package
- SOIC-8
- Series
- Linear-Verstärker.Instrumentation, OP-Verstärker, Pufferverstärker
Dieser detaillierte Vergleich von ADA4077-1ARZ und ADA4062-2BRZ-RL bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.
Replacement verdict
The ADA4077-1ARZ and ADA4062-2BRZ-RL are not functionally interchangeable: the ADA4077-1ARZ is a single-channel precision amplifier, while the ADA4062-2BRZ-RL is a dual-channel device, so channel count, package footprint, and board-level integration differ fundamentally. Direct substitution is not recommended without a full design review.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADA4077-1ARZ | ADA4062-2BRZ-RL | Why it matters |
|---|---|---|---|
| Number of Amplifiers | 1 | 2 | Channel count determines whether the part can serve single or dual signal paths; a dual cannot directly replace a single in a one-channel layout without unused-channel handling. |
| Input Offset Voltage (max) | 25 µV | 750 µV | Lower offset voltage yields better DC accuracy; the ADA4077-1 is a precision part while the ADA4062-2 is a general-purpose JFET input op amp. |
| Input Bias Current (typ) | 0.5 nA | 2 pA | Bias current affects error in high-impedance circuits; the JFET-input ADA4062-2 has far lower bias current, making it preferable for high source impedance applications. |
| Gain Bandwidth Product | 3.6 MHz | 1.4 MHz | GBW sets the achievable closed-loop bandwidth and small-signal speed; the ADA4077-1 supports wider bandwidth signal conditioning. |
| Slew Rate | 1.2 V/µs | 0.5 V/µs | Slew rate limits large-signal transient response; a faster slew rate supports higher-frequency, larger-amplitude signals without distortion. |
| Input Voltage Noise Density (1 kHz) | 7 nV/√Hz | 36 nV/√Hz | Lower voltage noise improves SNR in low-level signal amplification; the ADA4077-1 is significantly quieter than the ADA4062-2. |
| Supply Voltage Range | ±2.5 V to ±15 V (4.5 V to 30 V) | ±4 V to ±15 V (8 V to 30 V) | The wider low-voltage range of the ADA4077-1 allows operation in lower-supply systems where the ADA4062-2 cannot function. |
| Quiescent Current per Amplifier (typ) | 0.4 mA | 0.25 mA | Quiescent current impacts power budget; the ADA4062-2 draws less per amplifier, favoring battery-powered or low-power designs. |
| Input Common-Mode Voltage Range | Rail-to-rail input (includes both rails) | Within supply rails (not rail-to-rail) | Rail-to-rail input allows signals near the supply rails to be processed; the ADA4077-1 offers greater headroom flexibility than the ADA4062-2. |
| Operating Temperature Range | −40 °C to +125 °C | −40 °C to +125 °C | Both parts share the same industrial/extended temperature range, so thermal environment is not a differentiator for substitutability. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADA4077-1ARZ | ADA4062-2BRZ-RL |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Amplifier Type | General Purpose | J-FET |
| Number of Circuits | 1 | 2 |
| Slew Rate | 1.2V/µs | 3.3V/µs |
| Gain Bandwidth Product | 3.6 MHz | 1.4 MHz |
| Current - Input Bias | 400 pA | 2 pA |
| Voltage - Input Offset | 15 µV | 500 µV |
| Supply Current | 400µA | 165µA (x2 Channels) |
| Current - Output / Channel | 22 mA | 20 mA |
| Voltage - Supply Span(Min) | 5 V | 8 V |
| Voltage - Supply Span(Max) | 30 V | 36 V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
| Mounting Type | Surface Mount | Surface Mount |
The ADA4077-1ARZ is a single-channel, low-noise, precision operational amplifier, while the ADA4062-2BRZ-RL is a dual-channel, low-power, JFET-input operational amplifier. The ADA4077-1ARZ is specified for lower voltage noise and lower offset voltage, whereas the ADA4062-2BRZ-RL offers two amplifiers per package with very low input bias current and low supply current, making them suited to different signal-chain requirements.
No. The ADA4077-1ARZ is a single op amp in an 8-lead SOIC package, and the ADA4062-2BRZ-RL is a dual op amp in an 8-lead SOIC package. Although both use the same package outline, the pin functions differ because one device is single-channel and the other is dual-channel; therefore, they are not direct drop-in replacements for each other.
The ADA4062-2BRZ-RL uses a JFET input stage and is specified with very low input bias current, typically in the picoampere range. The ADA4077-1ARZ uses a bipolar input stage and has a higher input bias current, typically in the nanoampere range. This makes the ADA4062-2BRZ-RL preferable for high-impedance sensor interfaces, while the ADA4077-1ARZ is better suited to low-noise, low-offset precision applications.
The ADA4077-1ARZ is the better choice for low-noise precision signal conditioning. It is specified with low voltage noise density and low offset voltage, which are key parameters for precision amplification. The ADA4062-2BRZ-RL is optimized for low power and low input bias current rather than for the lowest voltage noise.
No, not directly. The ADA4062-2BRZ-RL is a dual op amp, so its pinout and channel count differ from the single ADA4077-1ARZ. A replacement would require a PCB redesign and verification of key parameters such as input bias current, noise, offset voltage, and supply current against the original design requirements.
Both devices operate from standard analog supply rails, but the ADA4062-2BRZ-RL is optimized for low supply current per amplifier, making it suitable for power-sensitive dual-channel designs. The ADA4077-1ARZ is a single precision amplifier with its own supply current specification. The actual supply voltage range and quiescent current for each part should be confirmed from the respective manufacturer datasheets before final selection.
The ADA4062-2BRZ-RL is more suitable for high-impedance sensor interfaces because its JFET input stage provides very low input bias current, minimizing errors from high source impedances. The ADA4077-1ARZ, with a bipolar input stage, has higher input bias current and is generally preferred where low noise and low offset voltage are the dominant requirements.