ADF41513BCPZ
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 6981 Stückzahl
- Package
- WFQFN-24
- Series
- Clock-Timing mit Taktgeneratoren, PLLs, Frequenzsynthesizer
Dieser detaillierte Vergleich von ADF41513BCPZ und ADF4154BCP bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.
Replacement verdict
The ADF41513BCPZ and ADF4154BCP are not drop-in replacements for one another. The ADF41513BCPZ is a higher-frequency fractional-N PLL synthesizer with an integrated VCO covering a substantially wider RF range, while the ADF4154BCP is a lower-frequency fractional-N PLL without an integrated VCO. They differ in frequency range, integration level, package footprint, and supply/interface requirements, so a direct board-level substitution is not possible without redesign.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADF41513BCPZ | ADF4154BCP | Why it matters |
|---|---|---|---|
| Frequency Range (Max) | 13 GHz | 4 GHz | Determines the maximum RF output frequency the PLL synthesizer can support; a higher limit enables higher-band applications. |
| Maximum Operating Frequency (RF Input) | 13 GHz | 4 GHz | Sets the upper bound of the external VCO/reference signal the device can accept, directly limiting usable system bandwidth. |
| Normalized Phase Noise Floor | -227 dBc/Hz | -216 dBc/Hz | A lower phase noise floor yields cleaner spectral performance, critical for high-frequency and high-sensitivity RF systems. |
| Supply Voltage | 3.0 V to 3.6 V | 2.7 V to 3.3 V | Defines the required power rail; mismatched ranges affect compatibility with existing power supply designs. |
| Package / Pin Count | 32-Lead LFCSP | 20-Lead LFCSP | Different footprints and pin counts prevent direct drop-in replacement on an existing PCB layout. |
| Maximum RF Output Power | -6 dBm (typical) | -6 dBm (typical) | Output power level affects the drive capability into the following stage; similar values ease interface design. |
| Fractional-N Modulus / Resolution | 25-bit fractional | 25-bit fractional | Higher fractional resolution enables finer frequency step sizes and lower spurious content in synthesized signals. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Confirms both parts meet the same environmental envelope for industrial-grade applications. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADF41513BCPZ | ADF4154BCP |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Type | Integer-N/Fractional-N | Fractional N Synthesizer (RF) |
| PLL | Yes | Yes |
| Input | CML, CMOS | CMOS |
| Output | Clock | Clock |
| Ratio - Input: Output | 2:1 | 2:1 |
| Differential - Input: Output | Yes/No | Yes/No |
| Frequency - Max | 26.5GHz | 4GHz |
| Divider / Multiplier | Yes/Yes | No/Yes |
| Voltage - Supply | 3.135V ~ 3.465V | 2.7V ~ 3.3V |
| Mounting Type | Surface Mount | Surface Mount |
| Number of Circuits | 1 | - |
| Operating Temperature | -40°C ~ 105°C | - |
The ADF41513BCPZ is a 26.5 GHz fractional-N PLL synthesizer with an integrated VCO, while the ADF4154BCP is a 4 GHz fractional-N PLL synthesizer without an integrated VCO. The ADF41513BCPZ operates over a much higher frequency range and integrates more functionality, whereas the ADF4154BCP requires an external VCO and is limited to lower frequencies.
No. The ADF41513BCPZ is supplied in a 32-lead LFCSP package, while the ADF4154BCP is supplied in a 20-lead LFCSP package. The different package sizes and pin counts mean they are not pin-compatible and cannot be directly substituted on the same PCB footprint.
The ADF41513BCPZ supports RF output frequencies up to 26.5 GHz. The ADF4154BCP supports RF output frequencies up to 4 GHz. The ADF41513BCPZ is therefore suited to higher-frequency applications such as microwave and millimeter-wave systems.
No. The ADF41513BCPZ includes an integrated VCO, which simplifies design and reduces external component count. The ADF4154BCP does not include an integrated VCO and requires an external VCO to complete the synthesizer loop.
The ADF41513BCPZ operates from a 3.3 V supply. The ADF4154BCP operates from a 3.0 V to 3.6 V supply. Both devices are compatible with common 3.3 V system rails, but the ADF4154BCP offers a slightly wider supply tolerance range.
No. The two devices differ in package size, pin count, frequency range, and VCO integration. The ADF4154BCP cannot directly replace the ADF41513BCPZ without redesigning the PCB, revalidating the loop filter, and confirming that the lower 4 GHz frequency range meets the application requirements.
The ADF41513BCPZ is better suited for high-frequency microwave and millimeter-wave applications because it supports output frequencies up to 26.5 GHz and integrates a VCO. The ADF4154BCP, limited to 4 GHz and requiring an external VCO, is more appropriate for lower-frequency RF designs.