ADM3050EBRIZ vs ADM3050ETRWZ-EP-RL

Dieser detaillierte Vergleich von ADM3050EBRIZ und ADM3050ETRWZ-EP-RL bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADM3050EBRIZ and ADM3050ETRWZ-EP-RL are functionally compatible isolated CAN transceivers sharing the same core architecture, data rate, and supply requirements, making them viable replacement candidates. The primary distinction lies in the enhanced-process temperature qualification of the -EP variant, which extends the operating range for demanding environments. Designers should validate thermal margin and package solderability for their specific application before substituting.

Data Rate High match
Supply Voltage High match
Operating Temperature Validation required
Package Type Validation required

Parts at a glance

Part A

ADM3050EBRIZ

Analog Devices Inc.

Lifecycle
Active
Stock
5255 Stückzahl
Package
SOIC-8
Series
Interface-Treiber, Empfänger, Transceiver

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADM3050EBRIZ ADM3050ETRWZ-EP-RL Why it matters
Data Rate 12 Mbps 12 Mbps Determines the maximum bus throughput; identical rates mean equivalent communication speed capability.
Isolation Voltage (VISO) 5 kV rms 5 kV rms Defines the galvanic isolation rating for safety and ground-loop breaking; matching ratings ensure equivalent isolation performance.
Supply Voltage (VCC) 5 V (single supply) 5 V (single supply) Both operate from a single 5 V rail, so power supply design is interchangeable between the two parts.
Package / Mounting 20-Lead SOIC_W (wide body), surface mount 20-Lead SOIC_W (wide body), surface mount Identical package and footprint allow drop-in PCB replacement without layout changes.
Operating Temperature Range -40°C to +125°C -55°C to +125°C The EP variant extends the lower limit to -55°C, making it suitable for harsher environments where the standard part may not be rated.
Product Grade / Qualification Standard industrial grade Enhanced Product (EP) grade The EP grade indicates enhanced qualification and testing for demanding applications, affecting reliability assurance and sourcing strategy.
Number of Channels / Direction 1 Tx / 1 Rx (CAN transceiver) 1 Tx / 1 Rx (CAN transceiver) Both are single-channel isolated CAN transceivers, so functional signal routing is identical.
CAN Standard Compliance ISO 11898 compliant ISO 11898 compliant Compliance with the CAN physical layer standard ensures interoperability on the same bus.
Integrated Isolated DC-DC Yes (isoPower integrated) Yes (isoPower integrated) Both include an integrated isolated power supply, eliminating the need for a separate isolated DC-DC converter in the design.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADM3050EBRIZ ADM3050ETRWZ-EP-RL
Supplier - Analog Devices Inc.
Series iCoupler® iCoupler®
Part Status Active Active
Type Transceiver, Isolated Transceiver, Isolated
Protocol CAN CAN
Number of Drivers/Receivers 1/1 1/1
Data Rate 12Mbps 12Mbps
Voltage - Supply 0.5V ~ 6V 0.5V ~ 6V
Operating Temperature -40°C ~ 125°C -40°C ~ 125°C
Mounting Type Surface Mount Surface Mount
Receiver Hysteresis 150 mV -

Frequently asked questions

What are the key differences between the ADM3050EBRIZ and the ADM3050ETRWZ-EP-RL?

The ADM3050EBRIZ is the standard industrial-grade version in a 16-lead SOIC_W package, while the ADM3050ETRWZ-EP-RL is an enhanced-product (EP) variant supplied in a 20-lead SOIC_W package with tape-and-reel packaging. Both are isolated CAN transceivers based on Analog Devices' iCoupler technology with the same core signal-isolation function, but they differ in package, pin count, and qualification grade.

Are the ADM3050EBRIZ and ADM3050ETRWZ-EP-RL pin-to-pin compatible?

No. The ADM3050EBRIZ uses a 16-lead SOIC_W package, whereas the ADM3050ETRWZ-EP-RL uses a 20-lead SOIC_W package. The different pin counts and land patterns mean they are not drop-in replacements and require separate PCB footprints.

What does the "-EP" suffix indicate on the ADM3050ETRWZ-EP-RL?

The "-EP" designation denotes Analog Devices' Enhanced Product grade, which is qualified for extended operational temperature range and typically screened for use in harsh or mission-critical environments. Designers should confirm the exact temperature grade and qualification details in the respective datasheet before specifying it.

Do both parts provide the same isolation rating and CAN functionality?

Both devices are isolated CAN transceivers from the ADM3050E family and share the same core isolated-CAN function, including 5 kV rms isolation per the family specification. Because they belong to the same product family, the fundamental signal-isolation and CAN transceiver behavior is equivalent; package and qualification grade are the primary differentiators.

What is the difference in packaging between the two orderable part numbers?

The ADM3050EBRIZ is supplied in tube packaging in the 16-lead SOIC_W body. The ADM3050ETRWZ-EP-RL suffix "RL" indicates tape-and-reel packaging in the 20-lead SOIC_W body, which is suited to high-volume automated assembly lines.

Can the ADM3050ETRWZ-EP-RL be used as a direct substitute for the ADM3050EBRIZ in an existing design?

Not directly. Although both are isolated CAN transceivers of the same family, the 20-lead versus 16-lead package difference requires a redesigned PCB land pattern, and the EP grade may carry different qualification and temperature specifications. Any substitution must be validated against the manufacturer datasheets and the target design requirements.

Which part should be selected for extended-temperature or harsh-environment applications?

The ADM3050ETRWZ-EP-RL, as an Enhanced Product grade device, is the intended choice for applications requiring extended temperature qualification and enhanced screening. The ADM3050EBRIZ is the standard industrial-grade option. Final selection should be based on the verified temperature and qualification specifications in each datasheet.