ADM3485EAR
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 3150 Stückzahl
- Package
- SOIC-8
- Series
- Interface-Treiber, Empfänger, Transceiver
Dieser detaillierte Vergleich von ADM3485EAR und ADM3485EARZ bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.
Replacement verdict
The ADM3485EARZ and ADM3485EAR are functionally equivalent RS-485/RS-422 transceivers from the same manufacturer family, sharing identical core electrical specifications, package footprint, and operating conditions. The primary distinction lies in the lead-free (RoHS-compliant) finish of the ADM3485EARZ versus the standard finish of the ADM3485EAR, making the EARZ variant a suitable drop-in candidate where environmental compliance is required, subject to final validation of solderability and assembly process compatibility.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADM3485EARZ | ADM3485EAR | Why it matters |
|---|---|---|---|
| Data Rate | 10 Mbps | 10 Mbps | Determines the maximum communication speed the transceiver supports; identical here so no functional difference. |
| Number of Drivers/Receivers | 1/1 | 1/1 | Defines the half-duplex configuration; both are single-driver, single-receiver devices, so they are interchangeable in this respect. |
| Supply Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | Specifies the operating supply range; matching values ensure the same power rail compatibility. |
| Duplex Mode | Half-duplex | Half-duplex | Determines whether the device can transmit and receive simultaneously; both are half-duplex, so bus topology requirements are the same. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Indicates the environmental range for reliable operation; identical ranges mean the same application environments are supported. |
| Mounting Type | Surface Mount | Surface Mount | Affects PCB assembly and footprint; both are surface-mount, so board-level integration is equivalent. |
| Package / Case | 8-SOIC (0.154", 3.90mm Width) | 8-SOIC (0.154", 3.90mm Width) Tape & Reel | The package outline is the same, but the Z suffix denotes a lead-free/RoHS-compliant tube or tray variant versus the tape-and-reel packaging of the non-Z part; this affects ordering format and compliance, not the footprint. |
| RoHS / Lead-Free Status | RoHS Compliant, Lead-Free | RoHS Compliant (packaging variant) | The Z suffix in ADM3485EARZ explicitly denotes the lead-free/RoHS-compliant version; this matters for regulatory compliance and solder process selection. |
| Protocol | RS-485 / RS-422 | RS-485 / RS-422 | Defines the serial interface standard supported; both support the same protocols, ensuring network compatibility. |
| Receiver Hysteresis | 20 mV | 20 mV | Provides noise immunity on the bus; identical hysteresis means equivalent noise margin performance. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADM3485EAR | ADM3485EARZ |
|---|---|---|
| Part Status | Obsolete | Active |
| Type | Transceiver | Transceiver |
| Protocol | RS422, RS485 | RS422, RS485 |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Duplex | Half | Half |
| Receiver Hysteresis | 50 mV | 50 mV |
| Data Rate | 10Mbps | 10Mbps |
| Voltage - Supply | 3V ~ 3.6V | 3V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
The ADM3485EARZ is the RoHS-compliant, lead-free (Pb-free) version of the ADM3485EAR. Both are ±15 kV ESD-protected, 3.3 V, half-duplex RS-485/RS-422 transceivers in an 8-lead SOIC package. The "Z" suffix in ADM3485EARZ denotes the RoHS-compliant packaging option per Analog Devices' ordering guide.
Yes. Both devices share the same datasheet specifications: 3.3 V single-supply operation, half-duplex RS-485/RS-422, data rates up to 12 Mbps, ±15 kV ESD protection on the bus pins, and an 8-lead SOIC package. The only documented difference is the RoHS/lead-free compliance designation indicated by the "Z" suffix.
Yes, in most cases. Both parts use the same 8-lead SOIC footprint and pinout, so the ADM3485EARZ is a form-fit-function replacement for the ADM3485EAR. Designs requiring RoHS compliance should use the ADM3485EARZ.
Both are 3.3 V, half-duplex RS-485/RS-422 transceivers with data rates up to 12 Mbps, ±15 kV ESD protection (HBM) on the RS-485 bus pins, a 1/8-unit-load receiver input impedance allowing up to 256 nodes on the bus, and an 8-lead SOIC package. They operate over the industrial temperature range of −40 °C to +85 °C.
The ADM3485EARZ should be selected for new designs requiring RoHS compliance, as the "Z" suffix designates the lead-free, RoHS-compliant package option. The ADM3485EAR is the non-RoHS legacy ordering code.
No. Both devices are specified with ±15 kV ESD protection on the RS-485 bus pins and support data rates up to 12 Mbps, per the Analog Devices datasheet. No performance difference is documented between the two ordering codes.
Yes. Both are offered in the 8-lead SOIC package (R-8 suffix). The package dimensions and pinout are identical, so PCB land patterns are interchangeable between the two ordering codes.