ADM4852ARZ vs ADM4857AR

Dieser detaillierte Vergleich von ADM4852ARZ und ADM4857AR bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADM4852ARZ and ADM4857AR are both half-duplex RS-485/RS-422 transceivers in an 8-lead SOIC package with a 5 V supply and a 1/8 unit load, making them functionally interchangeable for most bus-node applications. The ADM4857AR offers a higher maximum data rate and a wider operating temperature range, so the ADM4852ARZ can serve as a lower-speed substitute where the extended temperature range is not required, while the ADM4857AR can replace the ADM4852ARZ in higher-speed designs. Verify the data rate and temperature requirements of the target application before substitution.

Package Type High match
Supply Voltage High match
Data Rate Validation required
Operating Temperature Range Validation required

Parts at a glance

Part A

ADM4852ARZ

Analog Devices Inc.

Lifecycle
Active
Stock
4726 Stückzahl
Package
SOIC-8
Series
Interface-Treiber, Empfänger, Transceiver
Part B

ADM4857AR

Analog Devices Inc.

Lifecycle
Active
Stock
9284 Stückzahl
Package
SOIC-8
Series
Interface-Treiber, Empfänger, Transceiver

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADM4852ARZ ADM4857AR Why it matters
Data Rate 2.5 Mbps 10 Mbps Determines the maximum communication speed the transceiver can support; a higher data rate allows faster bus throughput.
Duplex Mode Half-duplex Full-duplex Half-duplex shares one pair for transmit/receive, while full-duplex uses separate pairs for simultaneous bidirectional communication.
Number of Drivers/Receivers 1/1 1/1 Indicates the transceiver channel count; both provide one driver and one receiver per package.
Operating Supply Voltage 5 V 5 V The nominal supply voltage must match the system rail for proper logic-level compatibility and bus signaling.
Mounting Type / Package Surface Mount, 8-SOIC Surface Mount, 8-SOIC Package and mounting style affect PCB footprint and assembly compatibility for drop-in substitution.
Operating Temperature Range -40°C to +85°C -40°C to +85°C Defines the environmental range over which the device is guaranteed to operate reliably.
Receiver Input Impedance 1/8 unit load (up to 256 nodes) 1/8 unit load (up to 256 nodes) Lower unit load allows more transceivers on the same bus without exceeding the standard's load limit.
Fail-Safe Receiver Yes (open-circuit fail-safe) Yes (open-circuit fail-safe) Fail-safe receivers ensure a defined logic output when the bus is idle, open, or unterminated, preventing spurious data.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADM4852ARZ ADM4857AR
Supplier - Rochester Electronics, LLC
Part Status Active Obsolete
Type Transceiver Transceiver
Protocol RS422, RS485 RS422, RS485
Number of Drivers/Receivers 1/1 1/1
Voltage - Supply 4.75V ~ 5.25V 4.75V ~ 5.25V
Mounting Type Surface Mount Surface Mount
Duplex Half -
Receiver Hysteresis 20 mV -
Data Rate 2.5Mbps -
Operating Temperature -40°C ~ 85°C -

Frequently asked questions

What are the key differences between the ADM4852ARZ and ADM4857AR?

The ADM4852ARZ is a half-duplex RS-485/RS-422 transceiver specified for data rates up to 2.5 Mbps, while the ADM4857AR is a full-duplex RS-485/RS-422 transceiver specified for data rates up to 10 Mbps. The ADM4852ARZ is supplied in an 8-lead SOIC package, whereas the ADM4857AR is supplied in a 14-lead SOIC package, reflecting the additional driver/receiver pins required for full-duplex operation.

Are the ADM4852ARZ and ADM4857AR pin-to-pin compatible?

No. The ADM4852ARZ uses an 8-lead SOIC package with half-duplex pinout (single differential pair shared between driver and receiver), while the ADM4857AR uses a 14-lead SOIC package with separate driver and receiver differential pairs for full-duplex operation. The package body widths and pin counts differ, so they cannot be interchanged on the same PCB land pattern.

Can the ADM4852ARZ be used as a drop-in replacement for the ADM4857AR?

No. Beyond the package and pinout differences, the ADM4852ARZ is a half-duplex device and the ADM4857AR is a full-duplex device. A half-duplex transceiver cannot directly replace a full-duplex transceiver in a four-wire RS-485 system without redesigning the bus topology and control logic. The maximum data rate also differs (2.5 Mbps versus 10 Mbps), so timing margins must be revalidated.

What are the maximum data rates of the ADM4852ARZ and ADM4857AR?

The ADM4852ARZ is specified for data rates up to 2.5 Mbps. The ADM4857AR is specified for data rates up to 10 Mbps. These figures are taken from the respective Analog Devices datasheets and apply over the specified operating conditions.

Do both devices operate from a single 5 V supply?

Yes. Both the ADM4852ARZ and the ADM4857AR are specified for operation from a single 5 V ±5% supply, consistent with the Analog Devices ADM485x family datasheets. Designers should confirm the exact supply tolerance and current consumption from the respective datasheet for their operating conditions.

What are the differences in duplex configuration and bus wiring?

The ADM4852ARZ is half-duplex: the driver and receiver share one differential pair (A/B), requiring direction control (DE/RE) to switch between transmit and receive. The ADM4857AR is full-duplex: it provides separate driver outputs (Y/Z) and receiver inputs (A/B), allowing simultaneous transmit and receive over a four-wire bus. The bus wiring and protocol timing must be designed accordingly.

Are both devices specified for the same operating temperature range?

Both the ADM4852ARZ and ADM4857AR are offered in industrial temperature grade versions specified for −40°C to +85°C operation, per the Analog Devices datasheets. The "ARZ" and "AR" suffixes denote the SOIC package and industrial temperature range; designers should verify the exact ordering code and temperature grade against the manufacturer's ordering guide.

Which device should be selected for a four-wire full-duplex RS-485 network?

The ADM4857AR should be selected for a four-wire full-duplex RS-485 network because it provides independent driver and receiver differential pairs, enabling simultaneous transmission and reception. The ADM4852ARZ, being half-duplex, is suited to two-wire buses where transmit and receive are time-multiplexed.