ADM708TARZ-REEL vs ADM706PAR

Dieser detaillierte Vergleich von ADM708TARZ-REEL und ADM706PAR bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADM708TARZ-REEL and ADM706PAR are both single-channel microprocessor supervisory circuits in 8-pin SOIC packages with active-low push-pull reset outputs, making them strong functional replacement candidates. The primary distinction is the reset threshold voltage, which differs between the two devices and must be validated against the target supply rail before substitution. Designers should confirm threshold tolerance and reset timeout requirements to ensure reliable supervisory behavior in the intended application.

Function Type High match
Package Type High match
Reset Output Type High match
Reset Threshold Voltage Validation required

Parts at a glance

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADM708TARZ-REEL ADM706PAR Why it matters
Reset Threshold Voltage (typ) 4.40 V 2.63 V Determines the supply voltage at which the supervisor asserts reset; the two parts monitor different nominal rails (5 V vs 3 V/3.3 V systems), so they are not directly substitutable without matching the monitored rail.
Number of Supervised Voltages 1 1 Both are single-voltage supervisors, so the channel count is compatible for basic supply monitoring designs.
Reset Output Type Active-low push-pull (RESET) plus active-high push-pull (RESET) Active-low push-pull (RESET) plus active-high push-pull (RESET) Output topology must match the logic polarity and drive requirements of the downstream processor or circuitry.
Manual Reset Input Yes Yes A manual reset pin allows external push-button or logic-driven system reset, a common functional requirement.
Watchdog Timer Yes Yes Watchdog supervision detects firmware lock-ups; both include it, so this feature is functionally equivalent.
Reset Timeout Delay (typ) 200 ms 200 ms The reset pulse width must be long enough for the processor to initialize; matching delays simplify drop-in replacement.
Supply Voltage Range (VCC) 4.75 V to 5.5 V 1.0 V to 5.5 V Operating supply range must cover the system rail; the wider range of the ADM706PAR allows use on lower-voltage rails.
Package / Mounting 8-lead SOIC (surface mount) 8-lead PDIP (through-hole) Footprint and assembly process differ, so board layout and manufacturing must be adapted; not a drop-in physical replacement.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Both cover the industrial temperature range, so environmental compatibility is equivalent.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADM708TARZ-REEL ADM706PAR
Part Status Active Obsolete
Type Simple Reset/Power-On Reset Simple Reset/Power-On Reset
Number of Voltages Monitored 1 1
Voltage - Threshold 3.08V 2.63V
Output Push-Pull, Push-Pull Push-Pull, Totem Pole
Reset Active High/Active Low Active High
Reset Timeout 160ms Minimum 160ms Minimum
Operating Temperature -40°C ~ 85°C (TA) -40°C ~ 85°C (TA)
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the key differences between the ADM708TARZ-REEL and the ADM706PAR?

The ADM708TARZ-REEL is a microprocessor supervisory circuit in an 8-lead SOIC package supplied on tape and reel, while the ADM706PAR is a microprocessor supervisory circuit in an 8-lead PDIP package. Both are from Analog Devices' ADM706/ADM708 family of supervisory circuits, but they differ in package type, mounting style, and packaging format for automated assembly versus through-hole prototyping.

What supply voltage range do the ADM708TARZ-REEL and ADM706PAR support?

Both devices operate from a single supply voltage of 4.75 V to 5.5 V, making them suitable for 5 V microprocessor supervisory applications. Designs requiring 3 V or 3.3 V operation should use the corresponding 3 V variants of the ADM706/ADM708 family rather than these parts.

What reset threshold voltage do these supervisory circuits monitor?

The ADM706PAR and ADM708TARZ-REEL monitor the 5 V supply with a reset threshold of approximately 4.65 V (typical). When VCC falls below this threshold, the reset output asserts to warn the microprocessor of an out-of-tolerance supply condition.

What is the difference between the reset outputs of the ADM706 and ADM708?

The ADM706 provides an active-low RESET output, while the ADM708 provides both an active-low RESET and an active-high RESET output. This makes the ADM708 suitable for systems that require complementary reset signals, whereas the ADM706 suits designs needing only an active-low reset.

Do the ADM708TARZ-REEL and ADM706PAR include a watchdog timer?

Yes. Both the ADM706 and ADM708 families integrate a watchdog timer that monitors microprocessor activity. If the microprocessor fails to toggle the WDI input within the watchdog timeout period, the watchdog output asserts, allowing the system to recover from a software lockup.

What is the difference in package and mounting between the ADM708TARZ-REEL and ADM706PAR?

The ADM708TARZ-REEL uses an 8-lead SOIC surface-mount package supplied on tape and reel, suited for automated SMT production lines. The ADM706PAR uses an 8-lead PDIP through-hole package, suited for prototyping, sockets, and through-hole PCB assemblies. The two packages are not footprint-compatible, so PCB layout must be designed accordingly.

Can the ADM708TARZ-REEL and ADM706PAR be used interchangeably in an existing design?

No, they are not drop-in replacements. The ADM708TARZ-REEL is a surface-mount SOIC device with both active-low and active-high reset outputs, while the ADM706PAR is a through-hole PDIP device with only an active-low reset output. Package footprint, mounting method, and reset output configuration differ, so substitution requires design and layout changes validated against the respective datasheets.

What is the operating temperature range for these supervisory circuits?

Both the ADM708TARZ-REEL and ADM706PAR are specified for the industrial temperature range of −40 °C to +85 °C, covering typical embedded and industrial control applications.