Part A
ADS1100A1IDBVR
Texas Instruments
- Lifecycle
- Active
- Stock
- 1553 Stückzahl
- Package
- SOT-23-6
- Series
- Datenerfassung mit Analog to Digital Converters (ADC)
Replacement verdict
Compatible functional replacement candidate
The ADS1100A0IDBVR and ADS1100A1IDBVR are functionally interchangeable 16-bit delta-sigma ADCs sharing the same SOT-23-6 package, I2C interface, and pinout; the only distinction is the factory-programmed I2C slave address, so the A1 variant can serve as a direct replacement for the A0 variant provided the system firmware is updated to the corresponding address.
Resolution and ADC Architecture
High match
Package and Pinout
High match
Supply Voltage and Interface
High match
I2C Slave Address
Validation required
Parts at a glance
Part B
ADS1100A0IDBVR
Texas Instruments
- Lifecycle
- Active
- Stock
- 1300 Stückzahl
- Package
- SOT-23-6
- Series
- Datenerfassung mit Analog to Digital Converters (ADC)
Key differences
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1100A0IDBVR | ADS1100A1IDBVR | Why it matters |
|---|---|---|---|
| Manufacturer | Texas Instruments | Texas Instruments | Same manufacturer ensures consistent quality, documentation, and support for both parts. |
| Resolution | 16 bits | 16 bits | Both provide 16-bit delta-sigma conversion, so measurement precision is equivalent. |
| Interface | I2C | I2C | Identical I2C interface allows drop-in compatibility with the same host bus. |
| Number of Input Channels | 1 (single-ended/differential) | 1 (single-ended/differential) | Same channel configuration supports the same sensor wiring schemes. |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | Identical supply range means both work in the same power domains. |
| Package / Mounting | SOT-23-6, Surface Mount | SOT-23-6, Surface Mount | Same package and footprint allow direct PCB replacement without layout changes. |
| Operating Temperature Range | -40°C to +85°C | -40°C to +85°C | Equivalent temperature ratings suit the same environmental conditions. |
| Data Rate (SPS) | 8, 16, 32, 128 SPS (selectable) | 8, 16, 32, 128 SPS (selectable) | Same selectable output rates provide identical throughput and noise trade-off options. |
| PGA Gain Settings | 1, 2, 4, 8 | 1, 2, 4, 8 | Identical programmable gain settings support the same small-signal input ranges. |
| Internal Reference | Yes (on-chip) | Yes (on-chip) | Both include an internal reference, simplifying design and reducing external components. |
Need help validating a replacement?
Send your BOM and application constraints for technical and sourcing review.
Full specification comparison
Use manufacturer datasheets as the final authority.
| Specification | ADS1100A1IDBVR | ADS1100A0IDBVR |
|---|---|---|
| Part Status | Active | Active |
| Number of Bits | 16 | 16 |
| Sampling Rate(Per Second) | 128 | 128 |
| Number of Inputs | 1 | 1 |
| Input Type | Differential, Single Ended | Differential, Single Ended |
| Data Interface | I²C | I²C |
| Configuration | PGA-ADC | PGA-ADC |
| Number of A/D Converters | 1 | 1 |
| Architecture | Sigma-Delta | Sigma-Delta |
| Reference Type | Supply | Supply |
| Voltage - Supply, Analog | 2.7V ~ 5.5V | 2.7V ~ 5.5V |
| Voltage - Supply, Digital | 2.7V ~ 5.5V | 2.7V ~ 5.5V |
| Features | PGA, Selectable Address | PGA |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
Frequently asked questions
What is the main difference between the ADS1100A0IDBVR and ADS1100A1IDBVR?
The primary difference is the factory-programmed I2C slave address. The ADS1100A0IDBVR uses I2C address 1001000, while the ADS1100A1IDBVR uses I2C address 1001001. Both are otherwise identical 16-bit, self-calibrating, delta-sigma analog-to-digital converters in a SOT-23-6 package.
Are the ADS1100A0IDBVR and ADS1100A1IDBVR pin-compatible?
Yes. Both devices are offered in the same SOT-23-6 (DBV) package with identical pin functions: VDD, GND, VIN+ (A0), VIN- (A1), SDA, and SCL. The PCB land pattern and pinout are the same; only the I2C address differs.
Can the ADS1100A0IDBVR and ADS1100A1IDBVR be used on the same I2C bus?
Yes. Because they have different fixed I2C slave addresses (1001000 vs 1001001), both devices can coexist on the same I2C bus without address conflict, provided bus capacitance and pull-up requirements are satisfied.
What is the resolution and data rate of these ADCs?
Both the ADS1100A0IDBVR and ADS1100A1IDBVR are 16-bit delta-sigma ADCs. The data rate is programmable via the configuration register to 8 SPS, 16 SPS, 32 SPS, or 128 SPS. Resolution in effective bits depends on the selected data rate and gain setting, per the manufacturer datasheet.
What supply voltage and interface do these devices support?
Both devices operate from a single supply of 2.7 V to 5.5 V and communicate over an I2C-compatible serial interface supporting standard and fast modes. They include an on-chip programmable gain amplifier with gain settings of 1, 2, 4, and 8.
Are the ADS1100A0IDBVR and ADS1100A1IDBVR drop-in replacements for each other?
They are electrically and mechanically interchangeable in most designs, but firmware must be updated to use the correct I2C address. The A0 variant responds at 1001000 and the A1 variant at 1001001; using the wrong address will prevent communication.
What is the operating temperature range for these components?
Both the ADS1100A0IDBVR and ADS1100A1IDBVR are specified for operation over the industrial temperature range of -40°C to +85°C, as stated in the manufacturer datasheet.