ADS1241E vs ADS1241E/1KG4

Dieser detaillierte Vergleich von ADS1241E und ADS1241E/1KG4 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADS1241E and ADS1241E/1KG4 are functionally equivalent, sharing identical core architecture, package, and electrical characteristics. The only distinction is the manufacturer's packaging designation, making the ADS1241E/1KG4 a direct functional substitute for the ADS1241E in existing designs.

Resolution and Architecture High match
Package Type High match
Supply Voltage Range High match
Operating Temperature Range High match

Parts at a glance

Part A

ADS1241E

Texas Instruments

Lifecycle
Active
Stock
1322 Stückzahl
Package
SSOP-28
Series
Datenerfassung mit Analog to Digital Converters (ADC)
Part B

ADS1241E/1KG4

Texas Instruments

Lifecycle
Active
Stock
7404 Stückzahl
Package
SSOP-28
Series
Datenerfassung mit Analog to Digital Converters (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS1241E ADS1241E/1KG4 Why it matters
Resolution 24 bit 24 bit Determines the smallest signal change the ADC can resolve; identical resolution means equivalent measurement precision.
Number of Input Channels 8 single-ended / 4 differential 8 single-ended / 4 differential Defines how many sensors can be connected; matching channel count ensures the same system-level input flexibility.
Interface Type SPI SPI The digital communication protocol must match the host microcontroller for drop-in compatibility.
Supply Voltage Range 2.7 V to 5.25 V 2.7 V to 5.25 V Confirms the part operates within the same power rail constraints of the target design.
Package / Mounting SSOP-28, Surface Mount SSOP-28, Surface Mount Package and footprint must match for physical board compatibility and reflow assembly.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Ensures the device meets the environmental requirements of the application.
PGA Gain 1 to 128 1 to 128 Programmable gain affects the ability to amplify low-level sensor signals; identical range preserves signal conditioning behavior.
Data Rate Up to 1 kSPS Up to 1 kSPS Sampling throughput must meet the application's measurement bandwidth; matching rates ensure equivalent timing performance.
Packaging / Ordering Tube Tape & Reel (1K) Different packaging affects manufacturing handling and reflow feed method, though the die and electrical performance are the same.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS1241E ADS1241E/1KG4
Supplier - Texas Instruments
Part Status Active Discontinued at Digi-Key
Number of Bits 24 24
Sampling Rate(Per Second) 15 15
Number of Inputs 8 8
Input Type Differential, Single Ended Differential, Single Ended
Data Interface SPI SPI
Configuration MUX-PGA-ADC MUX-PGA-ADC
Number of A/D Converters 1 1
Architecture Sigma-Delta Sigma-Delta
Reference Type External External
Voltage - Supply, Analog 2.7V ~ 3.3V, 5V 2.7V ~ 3.3V, 5V
Voltage - Supply, Digital 2.7V ~ 5.25V 2.7V ~ 5.25V
Features PGA PGA
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C

Frequently asked questions

What is the difference between ADS1241E and ADS1241E/1KG4?

The ADS1241E is the base orderable part number for the 24-bit delta-sigma ADC in a 28-pin TSSOP package. The ADS1241E/1KG4 is the same device supplied in tape-and-reel packaging (1,000 units per reel), as indicated by the /1K reel quantity and G4 lead-free/RoHS-compliant suffix. Both share identical electrical specifications and die; the difference is packaging and order quantity.

Are ADS1241E and ADS1241E/1KG4 electrically and functionally identical?

Yes. Both part numbers refer to the same ADS1241 silicon: a 24-bit delta-sigma analog-to-digital converter with a programmable gain amplifier, on-chip oscillator, and SPI-compatible serial interface. The /1KG4 suffix denotes tape-and-reel packing and lead-free (RoHS-compliant, G4) construction, not a change in device performance or function.

What is the resolution and architecture of the ADS1241?

The ADS1241 is a 24-bit delta-sigma (ΔΣ) analog-to-digital converter. It provides high-resolution conversion suitable for low-frequency, high-accuracy measurement applications such as temperature, pressure, and weigh-scale sensing.

What package do ADS1241E and ADS1241E/1KG4 use?

Both variants are offered in a 28-pin TSSOP (thin shrink small outline package). The package and pinout are identical between the two orderable part numbers, so PCB land patterns are the same.

Can ADS1241E/1KG4 be used as a drop-in replacement for ADS1241E?

Yes, from an electrical and footprint standpoint the devices are the same; the /1KG4 variant is simply supplied on tape-and-reel with lead-free (G4) construction. Designers should confirm their assembly process and inventory handling are compatible with tape-and-reel delivery and RoHS-compliant soldering.

What serial interface does the ADS1241 provide?

The ADS1241 provides an SPI-compatible serial peripheral interface for configuration and data readout, allowing connection to most microcontrollers and DSPs. This interface is common to both the ADS1241E and ADS1241E/1KG4 variants.

Does the G4 suffix on ADS1241E/1KG4 indicate RoHS compliance?

Yes. The G4 suffix denotes lead-free (Pb-free) construction consistent with RoHS requirements. The base ADS1241E orderable code may be supplied under the manufacturer's standard packing and finish options; customers requiring documented RoHS compliance should specify the G4-suffixed orderable part number.