ADS1281IPW vs ADS1232IPWG4

Dieser detaillierte Vergleich von ADS1281IPW und ADS1232IPWG4 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS1281IPW and ADS1232IPWG4 are not drop-in replacements for one another. The ADS1281IPW is a single-channel, high-resolution delta-sigma ADC with a serial SPI interface in a TSSOP-28 package, while the ADS1232IPWG4 is a dual-channel, lower-resolution delta-sigma ADC with a two-wire serial interface in a TSSOP-24 package. Their differing channel count, resolution, interface type, and package footprint make them functionally incompatible for direct substitution without redesign.

Different channel count Different resolution Different interface type Different package footprint

Parts at a glance

Part A

ADS1281IPW

Texas Instruments

Lifecycle
Active
Stock
4383 Stückzahl
Package
TSSOP-24
Series
Datenerfassung mit Analog to Digital Converters (ADC)
Part B

ADS1232IPWG4

Texas Instruments

Lifecycle
Active
Stock
3840 Stückzahl
Package
TSSOP-24
Series
Datenerfassung mit Analog to Digital Converters (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS1281IPW ADS1232IPWG4 Why it matters
Resolution (bits) 31 24 Higher resolution enables finer measurement of small signal changes; the ADS1281 offers 7 more bits than the ADS1232.
Architecture Delta-Sigma (2nd order) Delta-Sigma Architecture determines noise shaping and filter behavior; both are delta-sigma but differ in order and internal design.
Number of Input Channels 1 (differential) 2 (differential) Channel count affects how many sensors can be connected; the ADS1232 supports two differential inputs versus one on the ADS1281.
Sampling Rate (max) 4 kSPS 80 SPS Maximum output data rate determines bandwidth; the ADS1281 is far faster, suiting dynamic signals, while the ADS1232 targets slow precision measurements.
Interface SPI SPI Both use SPI, so the digital host connection is compatible, though register maps and command sets differ.
Supply Voltage (analog) 5 V (4.75 V to 5.25 V) 5 V (2.7 V to 5.3 V) Analog supply range affects compatibility with system rails; the ADS1232 tolerates a wider range including lower voltages.
Package TSSOP-24 TSSOP-24 Same package footprint allows potential board-level drop-in, though pin functions must be verified.
Operating Temperature Range -40°C to +85°C -40°C to +105°C Temperature range affects suitability for harsh environments; the ADS1232 supports a higher upper limit.
PGA / Gain Stage No integrated PGA Integrated PGA (gain 1 to 128) An integrated PGA allows direct connection of low-level sensors without external amplification; the ADS1281 lacks this feature.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS1281IPW ADS1232IPWG4
Supplier - Texas Instruments
Part Status Active Discontinued at Digi-Key
Number of Bits 31 24
Sampling Rate(Per Second) 4k 80
Number of Inputs 1 2
Input Type Differential, Single Ended Differential, Single Ended
Data Interface SPI SPI
Configuration ADC MUX-PGA-ADC
Number of A/D Converters 1 1
Architecture Sigma-Delta Sigma-Delta
Reference Type External External
Voltage - Supply, Analog 5V 2.7V ~ 5.3V
Voltage - Supply, Digital 1.65V ~ 3.6V 2.7V ~ 5.3V
Features - PGA
Operating Temperature -40°C ~ 85°C -40°C ~ 105°C

Frequently asked questions

What are the primary differences between the ADS1281IPW and ADS1232IPWG4?

The ADS1281IPW is a single-channel, 31-bit delta-sigma ADC with a maximum data rate of 4 kSPS, designed for high-resolution seismic and energy exploration applications. The ADS1232IPWG4 is a dual-channel, 24-bit delta-sigma ADC with an integrated PGA and a maximum data rate of 80 SPS, intended for weigh scales and pressure sensors. They differ in resolution, channel count, data rate, and target application.

Are the ADS1281IPW and ADS1232IPWG4 pin-to-pin compatible?

No. The ADS1281IPW is supplied in a 24-pin TSSOP (PW) package, while the ADS1232IPWG4 is supplied in a 24-pin TSSOP (PW) package as well, but the pin functions and internal architecture differ significantly. They are not direct drop-in replacements and require separate PCB layouts and firmware.

What are the maximum data rates of the ADS1281IPW and ADS1232IPWG4?

The ADS1281IPW supports a maximum data rate of 4 kSPS in its highest-speed mode. The ADS1232IPWG4 supports a maximum data rate of 80 SPS. The ADS1281IPW is therefore suitable for higher-bandwidth signal acquisition, while the ADS1232IPWG4 targets low-speed, high-precision measurement.

Do both devices include an integrated programmable gain amplifier (PGA)?

No. The ADS1232IPWG4 includes an integrated low-noise PGA with selectable gains of 1, 2, 64, and 128, which allows direct interfacing with low-level sensors such as load cells. The ADS1281IPW does not include an integrated PGA; it provides a differential input with a fixed gain architecture and relies on external signal conditioning for gain adjustment.

What are the resolution and channel-count differences between the ADS1281IPW and ADS1232IPWG4?

The ADS1281IPW is a single-channel, 31-bit delta-sigma ADC. The ADS1232IPWG4 is a dual-channel, 24-bit delta-sigma ADC. The ADS1281IPW offers higher bit resolution on a single channel, while the ADS1232IPWG4 provides two input channels at 24-bit resolution for multi-sensor designs.

Which device is better suited for weigh-scale or bridge-sensor applications?

The ADS1232IPWG4 is better suited for weigh-scale and bridge-sensor applications because it integrates a PGA with gains up to 128 and provides two differential input channels, enabling direct connection to load cells and bridge sensors without external amplification. The ADS1281IPW lacks an integrated PGA and is optimized for high-resolution seismic and energy exploration data acquisition.

What are the supply voltage requirements for the ADS1281IPW and ADS1232IPWG4?

The ADS1281IPW operates from an analog supply (AVDD) of 5 V and a digital supply (DVDD) of 3.3 V, with a separate reference input. The ADS1232IPWG4 operates from a single 5 V analog supply (AVDD) and a 3.3 V digital supply (DVDD), and it includes an internal oscillator. Designers should verify exact supply ranges against the respective manufacturer datasheets before finalizing power designs.

Can the ADS1281IPW and ADS1232IPWG4 share the same SPI interface configuration?

Both devices provide an SPI-compatible serial interface, but their register maps, command sets, and data output formats differ. The ADS1281IPW uses a 24-bit or 32-bit data output with a specific synchronization and calibration command structure, while the ADS1232IPWG4 uses a simpler read-only data output with a DRDY/DOUT interface. Firmware written for one device cannot be reused directly for the other without modification.