Part A
ADS124S08IPBSR
Texas Instruments
- Lifecycle
- Active
- Stock
- 4103 Stückzahl
- Package
- TQFP-32
- Series
- Datenerfassung mit Analog to Digital Converters (ADC)
Replacement verdict
Not a drop-in replacement
The ADS1292IPBSR and ADS124S08IPBSR are not drop-in replacements for one another. The ADS1292IPBSR is a two-channel, 24-bit biopotential front-end with integrated programmable gain amplifiers and a delta-sigma modulator optimized for ECG and EEG signal acquisition, while the ADS124S08IPBSR is an eight-channel, 24-bit precision delta-sigma ADC designed for general-purpose sensor measurement. Their channel counts, input architectures, package footprints, and target application domains differ substantially, so substituting one for the other requires a full redesign of the analog front-end, signal chain, and PCB layout rather than a direct part swap.
Different channel count
Different input architecture
Different package footprint
Different application domain
Parts at a glance
Part B
ADS1292IPBSR
Texas Instruments
- Lifecycle
- Active
- Stock
- 3344 Stückzahl
- Package
- TQFP-32
- Series
- Datenerfassung mit dem Analog Front End (AFE)
Key differences
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1292IPBSR | ADS124S08IPBSR | Why it matters |
|---|---|---|---|
| Number of input channels | 2 differential (2 ADC channels) | 12 single-ended / 6 differential (multiplexed) | Channel count determines how many signals can be measured; the ADS124S08 supports far more inputs, so it is not a drop-in for a 2-channel biopotential front end. |
| Resolution | 24-bit | 24-bit | Both are 24-bit delta-sigma converters, so nominal resolution is equivalent for precision measurement applications. |
| Integrated PGA | Yes (gain 1 to 12) | Yes (gain 1 to 128) | PGA gain range affects the smallest signal that can be resolved; the ADS124S08 offers much higher gain for low-level sensor signals. |
| Integrated features | ECG front end with integrated RLD, lead-off detection, respiration impedance measurement | General-purpose ADC with PGA, reference, excitation current sources, IDAC | The ADS1292 integrates biopotential-specific functions (RLD, lead-off, respiration), while the ADS124S08 is a general sensor ADC; functional substitutability is limited. |
| Maximum sample rate | 8 kSPS per channel | 4 kSPS | Sample rate limits signal bandwidth; the ADS1292 supports higher throughput, which matters for ECG and fast sensor acquisition. |
| Supply voltage | 2.7 V to 5.25 V (analog and digital) | 2.7 V to 5.25 V (analog), 1.65 V to 3.6 V (digital I/O) | Supply and I/O voltage compatibility affects direct board-level replacement and interfacing with host logic. |
| Package | 32-pin TQFP (5 x 5 mm) | 32-pin TQFP (5 x 5 mm) | Matching package footprint allows the same PCB land pattern, but pinout differences still prevent direct substitution. |
| Interface | SPI (compatible) | SPI (compatible) | Both use SPI, so host communication protocol is similar, though register maps and command sets differ. |
| Operating temperature range | -40 °C to +85 °C | -40 °C to +125 °C | The wider temperature range of the ADS124S08 suits harsher environments, while both cover standard industrial ranges. |
| Typical application focus | Biopotential / ECG, EEG, patient monitoring | Precision sensor measurement, industrial, temperature and bridge sensors | Different target applications mean the two parts are not functionally interchangeable despite shared ADC architecture. |
Need help validating a replacement?
Send your BOM and application constraints for technical and sourcing review.
Full specification comparison
Use manufacturer datasheets as the final authority.
| Specification | ADS124S08IPBSR | ADS1292IPBSR |
|---|---|---|
| Part Status | Active | Active |
| Number of Bits | 24 | 24 |
| Sampling Rate(Per Second) | 4k | - |
| Number of Inputs | 12 | - |
| Input Type | Single Ended | - |
| Data Interface | SPI | - |
| Configuration | MUX-PGA-ADC | - |
| Ratio - S / H: ADC | 0:1 | - |
| Number of A/D Converters | 1 | - |
| Architecture | Sigma-Delta | - |
| Reference Type | External, Internal | - |
| Voltage - Supply, Analog | 2.7V ~ 5.25V | 2.7V ~ 5.25V |
| Voltage - Supply, Digital | 2.7V ~ 3.6V | 1.7V ~ 3.6V |
| Features | PGA | - |
| Operating Temperature | -50°C ~ 125°C | - |
| Number of Channels | - | 2 |
| Power (Watts) | - | 740 µW |
| Mounting Type | - | Surface Mount |
Frequently asked questions
What are the primary functional differences between the ADS1292IPBSR and the ADS124S08IPBSR?
The ADS1292IPBSR is a 2-channel, 24-bit delta-sigma analog front-end (AFE) designed specifically for biopotential measurements such as ECG and respiration, integrating a programmable gain amplifier (PGA), internal reference, oscillator, and right-leg drive circuitry. The ADS124S08IPBSR is an 8-channel (12 single-ended/6 differential), 24-bit delta-sigma ADC intended for precision sensor and industrial measurement applications, featuring a PGA, internal reference, and sensor excitation current sources but without the biopotential-specific integrated features of the ADS1292.
Are the ADS1292IPBSR and ADS124S08IPBSR pin-to-pin or package compatible?
No. Both devices are offered in a TQFP-32 (PBS) package, but their pin functions and internal signal routing differ because they target different applications. The ADS1292IPBSR dedicates pins to ECG-specific functions such as right-leg drive, respiration modulation, and lead-off detection, while the ADS124S08IPBSR assigns pins to general-purpose analog inputs, excitation current sources, and GPIO. A direct PCB drop-in replacement is not supported without schematic and layout changes.
How do the input channel configurations of the two devices compare?
The ADS1292IPBSR provides 2 differential input channels optimized for biopotential signal acquisition. The ADS124S08IPBSR provides 8 analog inputs configurable as 12 single-ended or 6 differential channels, offering greater flexibility for multi-sensor precision measurement systems. The channel count and configuration options are therefore not equivalent between the two parts.
Do both devices support an integrated programmable gain amplifier and internal reference?
Yes. Both the ADS1292IPBSR and the ADS124S08IPBSR integrate a programmable gain amplifier and an internal voltage reference, reducing external component count. However, the gain ranges, reference specifications, and associated register configurations differ between the two devices and must be verified against the respective manufacturer datasheets for a given design.
Which device is better suited for ECG and biopotential applications?
The ADS1292IPBSR is purpose-built for biopotential applications, integrating right-leg drive, lead-off detection, respiration impedance measurement, and a dedicated ECG signal chain. The ADS124S08IPBSR is a general-purpose precision ADC and does not integrate these biopotential-specific functions, so it is not a direct substitute for ECG front-end designs without additional external circuitry.
Which device is more appropriate for multi-channel industrial sensor measurement?
The ADS124S08IPBSR is more appropriate for multi-channel industrial and precision sensor measurement because it offers 8 analog inputs (12 single-ended/6 differential), integrated excitation current sources for RTD and thermistor measurements, and general-purpose GPIO. The ADS1292IPBSR, with only 2 biopotential-oriented channels, is not intended for multi-sensor industrial acquisition.
Can the ADS1292IPBSR and ADS124S08IPBSR share the same SPI interface and digital host connection?
Both devices use an SPI-compatible serial interface for register configuration and data readout, so a host microcontroller with SPI capability can communicate with either device. However, register maps, command sets, data output formats, and timing parameters differ between the two parts, so firmware and driver software must be rewritten and validated for each device rather than reused unchanged.
Are the ADS1292IPBSR and ADS124S08IPBSR interchangeable in an existing design?
No. Although both are 24-bit delta-sigma converters in a TQFP-32 package, they differ in channel count, integrated features, pin functions, register architecture, and target application. Substitution requires a full review of the schematic, PCB layout, power supply requirements, and firmware against the respective manufacturer datasheets, and is not supported as a direct replacement.