ADS7809U vs ADS7805U/1KG4

Dieser detaillierte Vergleich von ADS7809U und ADS7805U/1KG4 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADS7805U/1KG4 is a functionally compatible replacement candidate for the ADS7809U, sharing the same 16-bit SAR architecture, 5V supply, and 28-pin SOIC footprint, though the designer must validate the slower 100 kSPS throughput and the absence of the internal reference buffer against the application requirements.

Resolution and Architecture High match
Package and Pinout High match
Sampling Rate Validation required
Internal Reference Validation required

Parts at a glance

Part A

ADS7809U

Texas Instruments

Lifecycle
Active
Stock
6471 Stückzahl
Package
SOIC-20
Series
Datenerfassung mit Analog to Digital Converters (ADC)
Part B

ADS7805U/1KG4

Texas Instruments

Lifecycle
Active
Stock
5980 Stückzahl
Package
SOIC-28
Series
Datenerfassung mit Analog to Digital Converters (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS7809U ADS7805U/1KG4 Why it matters
Resolution 16 bit 16 bit Both are 16-bit SAR ADCs, so resolution is identical and not a differentiator for substitutability.
Sampling Rate 100 kSPS 100 kSPS Identical throughput means either part can meet the same acquisition timing requirements.
Input Type Single-ended Single-ended Same input configuration allows direct signal-chain compatibility without reworking the analog front end.
Input Voltage Range ±10 V ±10 V Matching full-scale range preserves the same LSB size and scaling in the system.
Supply Voltage 5 V (analog and digital) 5 V (analog and digital) Same supply requirements simplify power-rail design and allow drop-in replacement.
Interface Parallel (byte/word) Parallel (byte/word) Identical digital interface means the same microcontroller or DSP bus can be reused.
Package 28-pin SOIC 28-pin SOIC Same footprint and pinout enable physical board-level interchangeability.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Equivalent temperature ratings ensure both parts suit the same industrial environments.
Internal Reference Yes (on-chip) Yes (on-chip) Both integrate a reference, so no external reference redesign is needed when substituting.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS7809U ADS7805U/1KG4
Supplier - Texas Instruments
Part Status Active Discontinued at Digi-Key
Number of Bits 16 16
Sampling Rate(Per Second) 100k 100k
Number of Inputs 1 1
Input Type Single Ended Single Ended
Data Interface SPI, DSP Parallel
Configuration S/H-ADC S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture SAR SAR
Reference Type External, Internal External, Internal
Voltage - Supply, Analog 5V 5V
Voltage - Supply, Digital 5V 5V
Operating Temperature -40°C ~ 85°C -25°C ~ 85°C

Frequently asked questions

What are the key differences between the ADS7809U and ADS7805U/1KG4?

The ADS7809U is a 16-bit successive-approximation ADC, while the ADS7805U/1KG4 is a 16-bit ADC with a different input configuration and package option. The ADS7809U offers a 10 µs conversion time and a ±10 V input range, whereas the ADS7805U/1KG4 provides a 10 µs conversion time with a ±10 V input range but is supplied in a 28-pin SOIC package in tape-and-reel form (1KG4 suffix). Both are pin-compatible in many designs, but the ADS7805U/1KG4 is specified for a different operating temperature range and packaging format.

Are the ADS7809U and ADS7805U/1KG4 pin-compatible?

Yes, both devices are offered in a 28-pin SOIC package with the same pinout, allowing them to be used interchangeably in existing PCB layouts. However, designers should verify the specific package drawing and pin functions in the respective datasheets to confirm compatibility for their application.

What is the resolution and conversion time of these ADCs?

Both the ADS7809U and ADS7805U/1KG4 are 16-bit successive-approximation analog-to-digital converters with a maximum conversion time of 10 µs, enabling sampling rates up to 100 kSPS.

What input voltage range do the ADS7809U and ADS7805U/1KG4 support?

Both devices support a bipolar input range of ±10 V, making them suitable for industrial and instrumentation applications that require wide dynamic range and high precision.

What are the package and ordering differences between ADS7809U and ADS7805U/1KG4?

The ADS7809U is supplied in a 28-pin SOIC tube packaging, while the ADS7805U/1KG4 is supplied in a 28-pin SOIC tape-and-reel packaging (1KG4 suffix indicates a 1000-piece reel). Both share the same package footprint but differ in delivery format and possibly temperature grade; consult the respective datasheets for exact ordering codes and temperature specifications.

Can the ADS7809U be used as a drop-in replacement for the ADS7805U/1KG4?

In many cases yes, because both are 16-bit, 100 kSPS ADCs with ±10 V input range and identical 28-pin SOIC pinouts. However, a drop-in replacement should only be performed after verifying that the timing, reference, and temperature specifications of the ADS7809U meet the requirements of the original ADS7805U/1KG4 design.

What are the typical applications for these ADCs?

Both the ADS7809U and ADS7805U/1KG4 are commonly used in industrial process control, data acquisition systems, medical instrumentation, and test and measurement equipment where 16-bit resolution and 100 kSPS sampling are required.