ADS7816U vs ADS7800KU/1K

Dieser detaillierte Vergleich von ADS7816U und ADS7800KU/1K bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS7816U and ADS7800KU/1K are not drop-in replacements for one another. The ADS7816U is a 12-bit, 200 kSPS successive-approximation ADC in a small 8-pin SOIC package with a serial SPI/QSPI interface, while the ADS7800KU/1K is a 12-bit, 333 kSPS sampling ADC in a larger 24-pin package with a parallel byte interface. Their resolution matches, but package footprint, digital interface, sampling rate, and supply/architecture differ substantially, so a direct board-level substitution is not possible without redesign.

Different package footprint Different digital interface Different sampling rate Different supply architecture

Parts at a glance

Part A

ADS7816U

Texas Instruments

Lifecycle
Active
Stock
6722 Stückzahl
Package
SOIC-8
Series
Datenerfassung mit Analog to Digital Converters (ADC)
Part B

ADS7800KU/1K

Texas Instruments

Lifecycle
Active
Stock
780 Stückzahl
Package
SOIC-24
Series
Datenerfassung mit Analog to Digital Converters (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS7816U ADS7800KU/1K Why it matters
Resolution 12 bit 12 bit Both are 12-bit ADCs, so nominal quantization resolution is equivalent for substitutability.
Sampling Rate 200 kSPS 333 kSPS The ADS7800KU/1K supports a higher throughput, which matters for faster signal acquisition requirements.
Input Type Single-ended Single-ended Both accept single-ended analog inputs, so the input topology is compatible for direct substitution.
Interface SPI / Serial Parallel The digital interface differs significantly; SPI versus parallel affects microcontroller pin count and firmware design.
Supply Voltage 5 V 5 V Both operate from a 5 V supply, simplifying power rail compatibility in existing designs.
Package SOIC-8 SOIC-28 Different package footprints require PCB layout changes and are not drop-in compatible.
Operating Temperature Range -40 to +85 °C -40 to +85 °C Identical industrial temperature ranges mean both suit the same environmental conditions.
Reference Type External Internal The ADS7800KU/1K includes an internal reference while the ADS7816U requires an external reference, affecting BOM and accuracy design.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS7816U ADS7800KU/1K
Supplier - Texas Instruments,Rochester Electronics, LLC
Part Status Active Obsolete
Number of Bits 12 12
Sampling Rate(Per Second) 200k 333k
Number of Inputs 1 1
Input Type Differential Single Ended
Data Interface SPI Parallel
Configuration S/H-ADC S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture SAR SAR
Reference Type External Internal
Voltage - Supply, Analog 5V 5V, -11.4V ~ 16.5V
Voltage - Supply, Digital 5V 5V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C

Frequently asked questions

What are the key architectural differences between the ADS7816U and the ADS7800KU/1K?

The ADS7816U is a 12-bit, 200-kSPS successive-approximation register (SAR) analog-to-digital converter with a pseudo-differential input and an SPI-compatible serial interface, housed in an SOIC-8 package. The ADS7800KU/1K is a 12-bit, 333-kSPS sampling SAR ADC with a parallel 12-bit output interface and an internal reference, offered in a 24-pin SOIC package. The ADS7816U targets compact, low-power serial-interface designs, while the ADS7800KU/1K targets higher-throughput parallel-bus systems.

Do the ADS7816U and ADS7800KU/1K have compatible package footprints for direct PCB replacement?

No. The ADS7816U is supplied in an 8-pin SOIC (D) package, whereas the ADS7800KU/1K is supplied in a 24-pin SOIC (DW) package. The pin counts, pin functions, and land patterns differ, so a direct drop-in replacement on the same PCB footprint is not possible without a layout redesign or adapter.

How do the sampling rates and throughput of the ADS7816U and ADS7800KU/1K compare?

The ADS7816U is specified for a 200-kSPS sampling rate, while the ADS7800KU/1K is specified for a 333-kSPS sampling rate. The ADS7800KU/1K therefore offers higher throughput, which suits faster acquisition systems, whereas the ADS7816U is intended for lower-speed, space-constrained designs.

What digital interfaces do the ADS7816U and ADS7800KU/1K provide?

The ADS7816U provides an SPI-compatible serial interface for data output and control, reducing pin count and simplifying isolation. The ADS7800KU/1K provides a parallel 12-bit output bus with associated control signals, which is suited to direct connection to a microprocessor or DSP parallel port. The interface choice is a primary factor when comparing the two devices for a given system architecture.

How do the analog input configurations of the ADS7816U and ADS7800KU/1K differ?

The ADS7816U features a pseudo-differential analog input, allowing it to reject small common-mode signals between the input and a reference node. The ADS7800KU/1K uses a single-ended analog input configuration with an internal reference. The input topology affects noise immunity and the external signal-conditioning circuitry required in the application.

What are the supply voltage and reference requirements for the ADS7816U and ADS7800KU/1K?

The ADS7816U operates from a single 5-V supply and requires an external reference voltage applied to its VREF pin. The ADS7800KU/1K operates from a 5-V supply and includes an internal reference, though external reference options are supported. Designs using the ADS7816U must therefore provide and validate an external reference, while the ADS7800KU/1K can operate with its on-chip reference.

Can the ADS7816U and ADS7800KU/1K be used interchangeably in an existing design?

No. Differences in package, pin count, digital interface (serial versus parallel), sampling rate, and reference architecture mean the two devices are not interchangeable without redesigning the interface, power/reference circuitry, and PCB layout. Any substitution must be validated against the respective manufacturer datasheets for the target design.