ADS8320E/2K5 vs ADS8321E/250G4

Dieser detaillierte Vergleich von ADS8320E/2K5 und ADS8321E/250G4 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADS8321E/250G4 is a viable functional replacement candidate for the ADS8320E/2K5, sharing the same 16-bit SAR architecture, SPI interface, and MSOP-8 footprint, though the differing sampling rate and supply voltage range require design validation before substitution.

Resolution and Architecture High match
Sampling Rate Validation required
Supply Voltage Range Validation required
Package and Pinout High match

Parts at a glance

Part A

ADS8320E/2K5

Texas Instruments

Lifecycle
Active
Stock
4183 Stückzahl
Package
VSSOP-8
Series
Datenerfassung mit Analog to Digital Converters (ADC)
Part B

ADS8321E/250G4

Texas Instruments

Lifecycle
Active
Stock
6742 Stückzahl
Package
TSSOP-8
Series
Datenerfassung mit Analog to Digital Converters (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS8320E/2K5 ADS8321E/250G4 Why it matters
Resolution 16 bit 16 bit Both are 16-bit SAR ADCs, so resolution is identical and not a differentiator for substitutability.
Sampling Rate 100 kSPS 100 kSPS Identical maximum throughput means either part can meet the same sampling requirements.
Supply Voltage (Analog & Digital) 2.7 V to 5.25 V 2.7 V to 5.25 V Same wide supply range allows both to operate from common 3.3 V or 5 V rails.
Input Type Single-ended, pseudo-differential Single-ended, pseudo-differential Matching input configuration ensures the same signal chain topology can be reused.
Interface SPI-compatible serial SPI-compatible serial Identical serial interface allows drop-in replacement without firmware changes.
Package 8-pin VSSOP (MSOP) 8-pin VSSOP (MSOP) Same package footprint enables direct PCB substitution.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Identical temperature ratings suit the same industrial environments.
Power Consumption ~1.8 mW at 100 kSPS, 5 V ~1.8 mW at 100 kSPS, 5 V Equivalent power draw means thermal and supply budgeting remain unchanged.
Reference Input External reference External reference Both require an external reference, so the same reference circuit can be shared.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS8320E/2K5 ADS8321E/250G4
Supplier - Texas Instruments
Series microPOWER™ microPOWER™
Part Status Active Discontinued at Digi-Key
Number of Bits 16 16
Sampling Rate(Per Second) 100k 100k
Number of Inputs 1 1
Input Type Pseudo-Differential, Single Ended Differential, Pseudo-Differential, Single Ended
Data Interface SPI SPI
Configuration S/H-ADC S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture SAR SAR
Reference Type External External
Voltage - Supply, Analog 5V 5V
Voltage - Supply, Digital 5V 5V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C

Frequently asked questions

What are the key differences between the ADS8320E/2K5 and ADS8321E/250G4?

The ADS8320E/2K5 is a 16-bit, 100-kSPS micropower SAR ADC with a pseudo-differential input, while the ADS8321E/250G4 is a 16-bit, 100-kSPS SAR ADC with a fully differential input. Both operate from a 2.7-V to 5.25-V supply and are pin-compatible in the same 8-pin VSSOP package, but the ADS8321 offers a differential input structure and a different SPI interface timing/frame format.

Are the ADS8320E/2K5 and ADS8321E/250G4 pin-compatible?

Yes. Both devices are offered in the same 8-pin VSSOP (DGK) package with the same pinout, so they are pin-compatible. However, pin compatibility does not guarantee functional interchangeability; the input configuration and digital interface behavior differ and must be validated in the target design.

What is the resolution and sample rate of each device?

Both the ADS8320E/2K5 and ADS8321E/250G4 are 16-bit successive-approximation register (SAR) analog-to-digital converters with a maximum throughput of 100 kSPS.

What supply voltage range do these ADCs support?

Both devices operate from a single supply of 2.7 V to 5.25 V, making them suitable for low-power and battery-operated systems.

How do the analog input configurations differ?

The ADS8320E/2K5 has a pseudo-differential input (one input is referenced to a fixed potential), whereas the ADS8321E/250G4 provides a fully differential input, which can improve common-mode rejection and signal swing in differential signal chains.

What digital interface do these converters use?

Both devices use an SPI-compatible serial interface. The ADS8320E/2K5 uses a standard SPI frame with a chip-select and serial clock, while the ADS8321E/250G4 uses a similar serial interface but with a different data frame/timing format; consult the respective datasheets before reusing firmware.

What are the typical power consumption figures for these parts?

Both are micropower SAR ADCs designed for low power consumption at 100 kSPS. Exact supply current and power figures depend on supply voltage and sample rate; refer to the manufacturer datasheets for verified typical and maximum values.

Can the ADS8321E/250G4 directly replace the ADS8320E/2K5 in an existing design?

Not without validation. Although the packages and pinouts match, the ADS8321E/250G4 has a fully differential input and a different serial frame format, so the analog front end, reference configuration, and firmware must be verified against the ADS8321 datasheet before substitution.