ADUC834BSZ vs ADUC843BS62-3

Dieser detaillierte Vergleich von ADUC834BSZ und ADUC843BS62-3 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADUC834BSZ and ADUC843BS62-3 are both MicroConverter 12-bit ADC MCUs from Analog Devices sharing the same 8051-core architecture and 52-pin MQFP footprint, making the ADUC843BS62-3 a viable functional replacement candidate for the ADUC834BSZ in space-constrained designs where reduced on-chip memory and peripheral set are acceptable. Designers should validate flash/EEPROM memory requirements, DAC channel needs, and supply voltage tolerance against the target application before committing to the substitution.

Package Type High match
Core Architecture High match
On-Chip Memory Validation required
DAC Channels Not compatible

Parts at a glance

Part A

ADUC834BSZ

Analog Devices Inc.

Lifecycle
Active
Stock
4126 Stückzahl
Package
MQFP-52
Series
Eingebettete Mikrocontroller

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADUC834BSZ ADUC843BS62-3 Why it matters
Core Architecture 8052-compatible 8-bit MCU core with dual 16-bit/24-bit sigma-delta ADCs 8052-compatible 8-bit MCU core with single 12-bit SAR ADC The ADC type fundamentally determines measurement resolution and suitable applications; sigma-delta suits precision sensing while SAR suits faster general-purpose conversion.
ADC Resolution / Type Two independent sigma-delta ADCs (24-bit primary, 16-bit auxiliary) 12-bit SAR ADC (single) Resolution and converter architecture directly affect achievable accuracy and noise performance in analog measurement systems.
Program Memory (Flash) 62 kB on-chip Flash/EE 62 kB on-chip Flash/EE Program memory size constrains firmware complexity; identical capacity means similar code footprint capability.
Data Memory (RAM) 2 kB on-chip RAM 2 kB on-chip RAM RAM determines runtime data buffering and stack capacity; matching values indicate comparable runtime memory headroom.
Supply Voltage 3 V to 3.6 V (3 V nominal) 3 V to 3.6 V (3 V nominal) Operating voltage must match the system power rail; identical ranges allow drop-in power compatibility.
Package 52-lead MQFP 52-lead MQFP Package footprint and pin count determine PCB layout compatibility and whether a direct board substitution is possible.
On-Chip DAC 12-bit voltage output DAC (single) 12-bit voltage output DAC (single) An integrated DAC enables analog output control loops; matching DAC specs indicate equivalent output capability.
UART / Serial Interface UART, SPI, and I2C serial interfaces UART, SPI, and I2C serial interfaces Serial peripherals determine connectivity options to sensors, hosts, and other ICs; matching sets preserve interface compatibility.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Temperature range defines environmental robustness; identical ratings mean equivalent suitability for industrial conditions.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADUC834BSZ ADUC843BS62-3
Supplier - Rochester Electronics, LLC
Series MicroConverter® ADuC8xx MicroConverter® ADuC8xx
Part Status Active Obsolete
Core Processor 8052 8052
Core Size 8-Bit 8-Bit
Speed 12.58MHz 8.38MHz
Connectivity EBI/EMI, I²C, SPI, UART/USART I²C, SPI, UART/USART
Peripherals POR, PSM, PWM, Temp Sensor, WDT DMA, PSM, PWM, Temp Sensor, WDT
Number of I/O 34 32
Program Memory Size 62KB (62K x 8) 62KB (62K x 8)
Program Memory Type FLASH FLASH
RAM Size 2.25K x 8 2.25K x 8
Voltage - Supply (Vcc/Vdd) 2.7V ~ 5.25V 2.7V ~ 3.6V
Data Converters A/D 3x16b, 4x24b; D/A 1x12b A/D 8x12b
Oscillator Type Internal Internal
Operating Temperature -40°C ~ 125°C (TA) -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount
EEPROM Size 4K x 8 -

Frequently asked questions

What are the core differences between the ADUC834BSZ and the ADUC843BS62-3?

The ADUC834BSZ is a MicroConverter 12-bit ADC with dual 16-bit/12-bit DACs, 62 kB flash, and an 8051 core in a 52-lead MQFP package. The ADUC843BS62-3 is a MicroConverter 12-bit ADC with 62 kB flash and an 8051 core in a 52-lead MQFP package, but it does not integrate DACs. The ADUC834BSZ targets precision analog control with DAC outputs, while the ADUC843BS62-3 targets ADC-only signal acquisition applications.

Are the ADUC834BSZ and ADUC843BS62-3 pin-to-pin compatible?

Both devices are offered in a 52-lead MQFP package, but pin-to-pin compatibility cannot be assumed. The ADUC834BSZ includes DAC output pins and associated analog functions that the ADUC843BS62-3 does not provide. Designers must verify pin functions against the respective manufacturer datasheets before considering any layout reuse.

Do both parts share the same 8051-compatible core and flash memory size?

Yes. Both the ADUC834BSZ and ADUC843BS62-3 integrate an 8051-compatible microcontroller core with 62 kB of on-chip flash program memory, as specified in the Analog Devices MicroConverter documentation. This common architecture allows similar code development flows, though peripheral differences affect the register map and firmware configuration.

What ADC resolution and channel count do these devices provide?

Both the ADUC834BSZ and ADUC843BS62-3 feature a 12-bit successive-approximation ADC with multiple input channels, per Analog Devices datasheets. The ADUC834BSZ adds a second 16-bit/12-bit DAC pair for analog output, which the ADUC843BS62-3 lacks. Exact channel counts and input configurations should be confirmed in the respective datasheets.

Can the ADUC843BS62-3 replace the ADUC834BSZ in an existing design?

Not directly. The ADUC843BS62-3 omits the DAC outputs present on the ADUC834BSZ, so any design relying on analog voltage or current output from the ADUC834BSZ would lose that function. Replacement requires a full review of analog output requirements, pin assignments, and firmware against both datasheets.

What supply voltage and operating temperature ranges apply to these parts?

Both devices are specified for 3 V and 5 V operation with industrial temperature range options, consistent with the Analog Devices MicroConverter family documentation. Designers should confirm the exact grade suffix and temperature range from the ordering guide of each datasheet, since the BSZ and BS62-3 suffixes denote specific package and qualification variants.

Which part is better suited for applications requiring analog output?

The ADUC834BSZ is the appropriate choice when on-chip analog output is required, because it integrates dual 16-bit/12-bit DACs alongside the 12-bit ADC. The ADUC843BS62-3 provides ADC and microcontroller functions only, so analog output would require an external DAC. Selection should be based on verified datasheet parameters for the target signal chain.