AFE58JD28ZAV
Texas Instruments
- Lifecycle
- Active
- Stock
- 7063 Stückzahl
- Package
- NFBGA-289
- Series
- Datenerfassung mit dem Analog Front End (AFE)
Dieser detaillierte Vergleich von AFE58JD28ZAV und AFE5832LPZAV bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.
Replacement verdict
The AFE58JD28ZAV is a viable functional replacement candidate for the AFE5832LPZAV, sharing the same 32-channel ultrasound AFE architecture, FCBGA-289 package footprint, and 12-bit ADC resolution. Designers should validate the integrated digital demodulator, JESD204B interface configuration, and power consumption profile against their specific system requirements before committing to a drop-in substitution.
Texas Instruments
Texas Instruments
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AFE5832LPZAV | AFE58JD28ZAV | Why it matters |
|---|---|---|---|
| Number of Channels | 32 | 16 | Channel count determines how many transducer elements can be simultaneously processed, directly affecting imaging system architecture and channel-count compatibility. |
| ADC Resolution | 12 bit | 12 bit | ADC bit depth sets the dynamic range and quantization noise floor of the receive path, influencing image contrast and small-signal detectability. |
| Maximum Sampling Rate | 80 MSPS | 65 MSPS | Sampling rate limits the maximum signal bandwidth and achievable axial resolution; a lower rate may restrict high-frequency probe support. |
| JESD204B Serial Lanes | 16 lanes | 8 lanes | Lane count affects FPGA interface complexity and board routing; fewer lanes simplify the digital backend but constrain aggregate throughput. |
| Digital Demodulation / CW Doppler | Not integrated | Integrated | Integrated continuous-wave Doppler and digital demodulation offload processing from the FPGA, which is critical for Doppler-capable ultrasound systems. |
| Package Type | FCBGA (ZAV) | FCBGA (ZAV) | Package and pinout compatibility determine whether a drop-in board redesign is feasible or whether PCB layout changes are required. |
| Operating Temperature Range | 0°C to 85°C | 0°C to 85°C | Temperature range confirms suitability for the target environment and must match system thermal design and reliability requirements. |
| Supply Voltage (Analog) | 1.8 V / 3.3 V | 1.8 V / 3.3 V | Supply rail requirements affect power delivery design and compatibility with existing board-level voltage regulation. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AFE58JD28ZAV | AFE5832LPZAV |
|---|---|---|
| Part Status | Active | Active |
| Number of Bits | 12, 14 | 10, 12 |
| Number of Channels | 16 | 32 |
| Power (Watts) | 64 mW | - |
| Voltage - Supply, Analog | 3.15V ~ 3.6V | - |
| Mounting Type | Surface Mount | Surface Mount |
Both are Texas Instruments integrated analog front-end (AFE) devices for ultrasound imaging systems. The AFE5832LP is an 8-channel, low-power AFE with 12-bit ADC and digital I/Q demodulation, while the AFE58JD28 is a 16-channel AFE with 12-bit ADC, digital I/Q demodulation, and JESD204B serial output. Both are supplied in a 289-ball NFBGA (ZAV) package.
The AFE5832LPZAV provides 8 receive channels, whereas the AFE58JD28ZAV provides 16 receive channels. This difference directly affects the number of transducer elements each device can support and the overall system channel density.
No. The AFE5832LPZAV uses a low-power LVDS output interface, while the AFE58JD28ZAV uses a JESD204B high-speed serial output interface. The JESD204B interface reduces the number of PCB traces required for high channel counts, but it requires a compatible JESD204B receiver in the host FPGA or processor.
Both devices are offered in the same 289-ball NFBGA (ZAV) package, but they are not functionally interchangeable. Pin assignments, supply requirements, and interface signals differ between the 8-channel AFE5832LP and the 16-channel AFE58JD28. A direct drop-in replacement should not be assumed without verifying the pinout and electrical specifications in the respective TI datasheets.
The AFE5832LPZAV is positioned as a low-power AFE and is generally more suitable for power-sensitive portable ultrasound systems. The AFE58JD28ZAV, with 16 channels and JESD204B output, is oriented toward higher-channel-count systems where the serial interface and channel density are prioritized over per-channel power.
Both the AFE5832LPZAV and AFE58JD28ZAV integrate 12-bit analog-to-digital converters (ADCs). The 12-bit resolution is common to both devices, so selection between them should be based on channel count, output interface, and power rather than ADC resolution.
Not directly. Although both share the 289-ball ZAV package, the AFE58JD28ZAV has twice the channel count and uses a JESD204B output instead of LVDS. Replacing one with the other requires redesign of the interface, clocking, power delivery, and FPGA receiver logic, and must be validated against the TI datasheets for both devices.