AM26LV31EIDR vs AM26LS32ACDG4

Dieser detaillierte Vergleich von AM26LV31EIDR und AM26LS32ACDG4 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The AM26LV31EIDR and AM26LS32ACDG4 are not functionally interchangeable: one is a low-voltage quad differential line driver while the other is a 5 V quad differential line receiver, so signal direction, supply voltage, and logic interface differ fundamentally. Direct substitution is not possible without redesigning the interface and validating the entire signal chain.

Different signal direction Different supply voltage Different logic interface Different package footprint

Parts at a glance

Part A

AM26LV31EIDR

Texas Instruments

Lifecycle
Active
Stock
4713 Stückzahl
Package
SOIC-16
Series
Interface-Treiber, Empfänger, Transceiver
Part B

AM26LS32ACDG4

Texas Instruments

Lifecycle
Active
Stock
5692 Stückzahl
Package
SOIC-16
Series
Interface-Treiber, Empfänger, Transceiver

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AM26LV31EIDR AM26LS32ACDG4 Why it matters
Function Quadruple differential line driver Quadruple differential line receiver A driver and a receiver serve opposite roles in a differential link, so they are not directly interchangeable in the same socket.
Supply voltage (VCC) 3.0 V to 3.6 V 4.75 V to 5.25 V Different supply rails mean the parts cannot share the same power domain without level shifting or a rail change.
Logic family / signaling standard Low-voltage RS-422 / TIA/EIA-422-B driver RS-422 / RS-423 receiver (5 V) The signaling standard and voltage class determine compatibility with the rest of the bus and connected nodes.
Number of drivers / receivers 4 drivers, 0 receivers 0 drivers, 4 receivers The channel direction count must match the system architecture; a driver cannot replace a receiver function.
Output type Differential (3-state) outputs Differential inputs with 3-state outputs Driver outputs versus receiver inputs define the electrical interface direction and cannot be swapped.
Package 16-pin SOIC (D) 16-pin SOIC (D) Matching package footprint allows board-level drop-in, but function and voltage still differ.
Operating temperature range -40 °C to +85 °C 0 °C to +70 °C The wider industrial range of the driver affects suitability in harsh or outdoor environments.
Data rate / signaling speed class Up to ~32 Mbps (RS-422 class) Up to ~10 Mbps (RS-422 class) Speed class affects maximum bus length and bit rate achievable in the target application.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AM26LV31EIDR AM26LS32ACDG4
Supplier - Texas Instruments
Part Status Active Discontinued at Digi-Key
Type Driver Receiver
Protocol RS422, RS485 RS422, RS423
Number of Drivers/Receivers 4/0 0/4
Receiver Hysteresis - 50 mV
Voltage - Supply 3V ~ 3.6V 4.75V ~ 5.25V
Operating Temperature -40°C ~ 85°C 0°C ~ 70°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the primary functional differences between the AM26LV31EIDR and the AM26LS32ACDG4?

The AM26LV31EIDR is a quad low-voltage differential line driver designed for 3.3 V operation, while the AM26LS32ACDG4 is a quad differential line receiver designed for 5 V operation. They serve complementary roles in differential signaling systems rather than being interchangeable.

Are the AM26LV31EIDR and AM26LS32ACDG4 pin-compatible?

No. The AM26LV31EIDR is supplied in a 16-pin SOIC package, and the AM26LS32ACDG4 is supplied in a 16-pin SOIC package as well, but their pin functions differ because one is a driver and the other is a receiver. Pin assignments and signal directions are not interchangeable.

What supply voltage does each device require?

The AM26LV31EIDR operates from a single 3.3 V supply (typically 3.0 V to 3.6 V). The AM26LS32ACDG4 operates from a single 5 V supply (typically 4.75 V to 5.25 V).

Can the AM26LV31EIDR drive a differential signal that the AM26LS32ACDG4 can receive?

Yes, in principle a 3.3 V differential driver can interface with a 5 V differential receiver provided the receiver's input thresholds and common-mode range are satisfied. The AM26LS32ACDG4 has a wide common-mode input range, but the interface must be validated against the datasheet limits for both devices.

What are the signaling standards supported by each device?

The AM26LV31EIDR is designed for low-voltage differential signaling (LVDS-compatible TIA/EIA-644-type) applications at 3.3 V. The AM26LS32ACDG4 is a differential line receiver intended for RS-422/RS-485-type balanced data transmission at 5 V. They are not the same standard, so direct substitution is not appropriate.

What are the operating temperature ranges for these devices?

Both the AM26LV31EIDR and the AM26LS32ACDG4 are specified for the industrial temperature range of -40 °C to +85 °C, per their respective manufacturer datasheets.

Can the AM26LS32ACDG4 be used as a driver in a differential link?

No. The AM26LS32ACDG4 is a quad differential line receiver only; it does not provide driver outputs. A driver such as the AM26LV31EIDR or an equivalent RS-422 driver is required on the transmit side.

Are these devices drop-in replacements for one another in an existing design?

No. Because one is a 3.3 V driver and the other is a 5 V receiver, they are not functionally or electrically interchangeable. Any substitution requires revalidation of supply voltage, signal direction, input/output thresholds, and PCB pin assignments against the manufacturer datasheets.