AMC1300BDWV
Texas Instruments
- Lifecycle
- Active
- Stock
- 6086 Stückzahl
- Package
- SOIC-8
- Series
- Linear-Verstärker
Dieser detaillierte Vergleich von AMC1300BDWV und AMC1305M25DWR bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.
Replacement verdict
The AMC1305M25DWR and AMC1300BDWV are both isolated delta-sigma modulators sharing a common functional role, but they differ in input voltage range, output interface, and isolation rating. The AMC1305M25DWR is a ±250 mV input modulator with a single-ended CMOS output, while the AMC1300BDWV offers a ±50 mV input range with a differential output. Designers should validate input signal scaling, digital interface compatibility, and isolation requirements before substituting one for the other in a given application.
Texas Instruments
Texas Instruments
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AMC1305M25DWR | AMC1300BDWV | Why it matters |
|---|---|---|---|
| Input Type | Current shunt (isolated delta-sigma modulator) | Voltage (isolated amplifier) | Determines whether the device measures current via a shunt or amplifies a voltage signal, which fundamentally changes the sensing circuit topology. |
| Output Format | 1-bit digital bitstream (delta-sigma) | Analog differential output | A digital bitstream requires an external digital filter/decoder, while an analog output feeds directly into an ADC or controller, affecting system architecture. |
| Isolation Rating | 5000 V RMS (reinforced) | 5000 V RMS (reinforced) | Both provide reinforced isolation, but confirming the rating ensures safe galvanic separation in high-voltage applications. |
| Input Voltage Range | ±250 mV (shunt input) | ±250 mV (linear input range) | Defines the maximum signal swing the device can accept; matching this to the sensor output prevents clipping and preserves accuracy. |
| Supply Voltage | 3.3 V (high side) / 3.3 V or 5 V (low side) | 3.3 V to 5.5 V (both sides) | Supply requirements affect power rail design and compatibility with the host controller and isolated power scheme. |
| Gain | Fixed (modulator, no analog gain) | Fixed gain of 8.2 V/V | Gain determines the signal scaling; a fixed analog gain versus a modulator output changes how the downstream system interprets the signal. |
| Package | SOIC-16 (wide body) | SOIC-8 (wide body) | Package footprint and pin count affect PCB layout and whether the parts are drop-in compatible. |
| Operating Temperature Range | -40°C to +125°C | -40°C to +125°C | Both cover the industrial range, ensuring reliable operation across harsh environments. |
| Bandwidth | Up to ~20 MHz clock (modulator) | ~100 kHz (analog) | Bandwidth limits the maximum signal frequency the device can faithfully process, impacting control-loop speed and measurement fidelity. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AMC1300BDWV | AMC1305M25DWR |
|---|---|---|
| Part Status | Active | Active |
| Type | Isolation | Isolated Module |
| Applications | Current Sensing, Power Management | - |
| Mounting Type | Surface Mount | Surface Mount |
| Number of Channels | - | 1 |
| Resolution(Bits) | - | 16 b |
| Sampling Rate(Per Second) | - | 78k |
| Data Interface | - | CMOS, Serial |
| Voltage Supply Source | - | Analog and Digital |
| Voltage - Supply | - | 3V ~ 5.5V |
| Operating Temperature | - | -40°C ~ 125°C |
The AMC1305M25DWR is a reinforced isolated delta-sigma modulator with a ±250-mV input range and a fixed 20-MHz clock, designed for shunt-based current sensing with direct digital output. The AMC1300BDWV is a reinforced isolated amplifier with a ±250-mV input range and a differential analog output, intended for use with an external ADC. The key difference is the output type: the AMC1305M25DWR provides a 1-bit delta-sigma bitstream, while the AMC1300BDWV provides an analog differential signal.
No. Both devices are offered in an 8-pin SOIC (DWV) package, but their pin functions differ. The AMC1305M25DWR provides a clock input and a data output, whereas the AMC1300BDWV provides an analog differential output pair (VOUTP/VOUTN). Therefore, they are not direct pin-to-pin replacements and require different PCB routing and interface circuitry.
Both the AMC1305M25DWR and the AMC1300BDWV specify a linear input voltage range of ±250 mV, making them suitable for low-side shunt resistor current sensing in motor drive and inverter applications.
Both devices are reinforced isolated components rated for a maximum isolation voltage of 5000 V RMS per the respective Texas Instruments datasheets, and both are qualified to the same reinforced isolation standards for industrial applications.
The AMC1305M25DWR is the appropriate choice when the system includes a digital filter or microcontroller capable of processing a 1-bit delta-sigma bitstream, since it outputs a modulated digital data stream clocked at 20 MHz. The AMC1300BDWV is preferred when the signal chain uses a separate external ADC, because it provides a differential analog output.
Yes. Both the AMC1305M25DWR and the AMC1300BDWV use a high-side supply (AVDD) of 3.0 V to 5.5 V and a low-side supply (DVDD) of 3.0 V to 5.5 V, allowing them to share a common power architecture in isolated sensing designs.
The AMC1305M25DWR is typically used in shunt-based current sensing for motor drives, inverters, and renewable energy systems where a digital bitstream is processed by an MCU or FPGA. The AMC1300BDWV is typically used in the same current-sensing applications but with an external ADC in the signal chain, such as in industrial motor control and power conversion systems.