AMC1300BDWVR vs AMC1305M25DWR

Dieser detaillierte Vergleich von AMC1300BDWVR und AMC1305M25DWR bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AMC1305M25DWR and AMC1300BDWVR are both isolated delta-sigma modulators in a 16-pin SOIC package with a 5 V supply and ±50 mV input range, making them functionally related. However, the AMC1305M25DWR provides a single-ended output with an external clock input, while the AMC1300BDWVR delivers a differential output with an internal clock, so the two are not pin-for-pin or signal-chain drop-in equivalents. The AMC1300BDWVR is the more suitable candidate when a differential output and reduced external clocking are required, whereas the AMC1305M25DWR should be selected when a single-ended output and externally synchronized clocking are needed. Designers must validate output interface, clocking scheme, and isolation ratings against the target system before substitution.

Output Type Validation required
Clocking Scheme Validation required
Package Type High match
Input Voltage Range High match

Parts at a glance

Part B

AMC1305M25DWR

Texas Instruments

Lifecycle
Active
Stock
3118 Stückzahl
Package
SOIC-16
Series
Datenerfassung von ADCs-DACs für besonderen Zweck

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AMC1305M25DWR AMC1300BDWVR Why it matters
Input Type Current shunt (isolated delta-sigma modulator) Voltage input (isolated amplifier) Determines whether the device measures current via a shunt or amplifies a voltage signal; these are not functionally interchangeable.
Output Type 1-bit digital bitstream (delta-sigma) Analog differential output A digital bitstream requires an external digital filter/decoder, while an analog output feeds an ADC directly; the downstream signal chain differs fundamentally.
Isolation Rating 5000 V RMS (reinforced) 5000 V RMS (reinforced) Both provide reinforced isolation suitable for high-voltage sensing, so isolation capability is comparable.
Input Voltage Range ±250 mV (shunt input) ±250 mV (linear input range) Defines the maximum differential signal each device can accept before clipping or saturating.
Supply Voltage 3.3 V (high side) / 3.3 V or 5 V (low side) 3.3 V to 5.5 V (both sides) Affects power supply design and compatibility with the surrounding logic and analog circuitry.
Package SOIC-16 (wide body) SOIC-8 (wide body) Different footprints and pin counts prevent direct board-level drop-in replacement.
Operating Temperature Range -40°C to +125°C -40°C to +125°C Both support industrial temperature ranges, so thermal suitability is equivalent.
Gain / Sensitivity Fixed modulator gain (bitstream density proportional to input) Fixed gain of 8.2 V/V The transfer characteristic differs; the modulator encodes input as bitstream density while the amplifier provides a fixed analog gain.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AMC1300BDWVR AMC1305M25DWR
Part Status Active Active
Type Isolation Isolated Module
Applications Current Sensing, Power Management -
Mounting Type Surface Mount Surface Mount
Number of Channels - 1
Resolution(Bits) - 16 b
Sampling Rate(Per Second) - 78k
Data Interface - CMOS, Serial
Voltage Supply Source - Analog and Digital
Voltage - Supply - 3V ~ 5.5V
Operating Temperature - -40°C ~ 125°C

Frequently asked questions

What are the primary functional differences between the AMC1305M25DWR and the AMC1300BDWVR?

The AMC1305M25DWR is a reinforced isolated delta-sigma modulator with a ±250-mV input range and a 20-MHz clock, designed for shunt-based current sensing with direct digital output. The AMC1300BDWVR is a reinforced isolated amplifier with a ±250-mV input range and a fixed gain of 8.2, providing a differential analog output. The key difference is the output type: the AMC1305M25DWR delivers a 1-bit delta-sigma bitstream, while the AMC1300BDWVR delivers an analog voltage proportional to the input.

Are the AMC1305M25DWR and AMC1300BDWVR pin-to-pin compatible?

No. Both devices are offered in a 16-pin SOIC (DW) package, but their pin functions differ. The AMC1305M25DWR provides a clock input and a data output for the delta-sigma bitstream, whereas the AMC1300BDWVR provides differential analog output pins (VOUTP, VOUTN). Therefore, they cannot be used as direct drop-in replacements without circuit and layout changes.

Do both devices provide reinforced isolation and what is the isolation rating?

Yes. Both the AMC1305M25DWR and the AMC1300BDWVR are reinforced isolated devices rated for 5000-VRMS isolation per UL 1577, and both are offered in a 16-pin SOIC package with a wide-body construction suitable for high-voltage isolation applications.

What is the input voltage range of each device?

Both the AMC1305M25DWR and the AMC1300BDWVR specify an input voltage range of ±250 mV, making them suitable for low-side shunt resistor current sensing in motor drive and inverter applications.

How does the output interface differ between the two parts?

The AMC1305M25DWR outputs a 1-bit delta-sigma modulated bitstream that requires an external digital filter or a microcontroller with a suitable sinc filter to reconstruct the signal. The AMC1300BDWVR outputs a differential analog voltage with a fixed gain of 8.2, which can be directly connected to an ADC or analog control loop without digital filtering.

Which device is better suited for a design that already uses a delta-sigma modulator-based current sensing chain?

The AMC1305M25DWR is the appropriate choice when the system already includes a delta-sigma demodulation/filter path, such as a microcontroller with a sigma-delta filter module or an external digital filter, because it provides a direct digital bitstream output. The AMC1300BDWVR would instead require an ADC to digitize its analog output.

Can the AMC1300BDWVR replace the AMC1305M25DWR in an existing design without firmware changes?

No. Replacing the AMC1305M25DWR with the AMC1300BDWVR changes the signal chain from a digital bitstream to an analog output, requiring removal of the digital filter/demodulation stage and addition of an ADC, along with PCB and firmware modifications. The reverse replacement likewise requires adding a digital filter path. Neither substitution is transparent to the system design.

What are the common application areas for both devices?

Both the AMC1305M25DWR and the AMC1300BDWVR are used for isolated current and voltage sensing in industrial motor drives, inverters, solar inverters, energy storage systems, and battery management systems, where reinforced isolation and ±250-mV input range are required for shunt-based measurement.