LT3045EDD#PBF vs LT3048EDC-3.3#TRMPBF

Dieser detaillierte Vergleich von LT3045EDD#PBF und LT3048EDC-3.3#TRMPBF bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Parts at a glance

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Anfrage Contact technical support

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification LT3045EDD#PBF LT3048EDC-3.3#TRMPBF
Part Status Active Active
Topology - Step-Up (Boost) (1), Linear (LDO) (1)
Number of Outputs - 2
Frequency - Switching - 2.2MHz
Voltage / Current - Output1 - 4.4V, 300mA
Voltage / Current - Output2 - 3.3V, 45mA
w / LED Driver - No
w / Supervisor - No
w / Sequencer - No
Voltage - Supply - 2.7V ~ 4.8V
Operating Temperature -40°C ~ 125°C (TJ) -40°C ~ 125°C
Mounting Type Surface Mount Surface Mount
Output Configuration Positive -
Output Type Adjustable -
Number of Regulators 1 -
Voltage - Input (Max) 20V -
Voltage - Output (Min/Fixed) 0V -
Voltage - Output (Max) 15V -
Voltage Dropout (Max) 0.45V @ 500mA -
Current - Output 500mA -
Current - Quiescent (Iq) 20 µA -
Current - Supply (Max) 25 mA -
PSRR 117dB ~ 53dB (120Hz ~ 10MHz) -
Control Features Enable, Power Good, Soft Start -
Protection Features Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO) -
Compare Anfrage