Abbildungen dienen nur als Referenz
24LC01BT-I/SN
+StücklisteIC EEPROM 1KBIT I2C 400KHZ 8SOIC
-
HerstellerMikrochip-Technologie
-
Herstellerteil #24LC01BT-I/SN
-
Datenblatt 24LC01BT-I/SN DataSheet
-
Paket SOIC-8
-
Auf Lager5061
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Part Status | Active |
| Memory Type | Non-Volatile |
| Memory Format | EEPROM |
| Technology | EEPROM |
| Memory Size | 1Kb (128 x 8) |
| Memory Interface | I²C |
| Clock Frequency | 400 kHz |
| Write Cycle Time - Word Page | 5ms |
| Access Time | 3.5 µs |
| Voltage - Supply | 2.5V ~ 5.5V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
Übersicht
Description
Equivalent
Features
1. Memory Organization: 128 x 8 bits.
2. Interface: I²C bus protocol compatible for communication, supporting standard (100 kHz) and fast (400 kHz) modes.
3. Voltage Range: Operates with a wide voltage range from 2.5V to 5.5V.
4. Low Power Consumption: Features low standby and active current requirements, making it energy-efficient.
5. Write Cycle Time: Typical write cycle time is 5 ms.
6. Page Write Capability: Allows writing up to 8 bytes in a single write operation.
7. Data Retention: Offers data retention up to 200 years and is rated for 1 million erase/write cycles.
8. Package: Available in 8-pin SOIC package.
These features make it suitable for applications requiring reliable, low-power, non-volatile memory storage, such as consumer electronics, automotive systems, and industrial equipment.
Pinout
1. A0, A1, A2: These are the device address inputs. They are used to configure the hardware address of the EEPROM for I2C communication, allowing multiple devices to be used on the same bus.
2. VSS: Ground reference.
3. SDA (Serial Data): This pin is used for transferring data in and out of the device. It is a bidirectional pin and operates in conjunction with the SCL line.
4. SCL (Serial Clock): This pin is the clock input for the I2C interface. It synchronizes the data transfer between the master and the EEPROM.
5. WP (Write Protect): This pin is used to protect the EEPROM from being inadvertently written. When connected to VCC, the write operations are disabled.
6. VCC: Supply voltage input.
The 24LC01BT-I/SN is typically used for storing small amounts of data that need to be retained without power.
Manufacturer
Application
1. Consumer Electronics: Storing configuration settings and calibration data.
2. Industrial Automation: Retaining sensor and device settings.
3. Computing: BIOS storage and hardware configuration.
4. Medical Devices: Data logging and storing patient settings.
5. Communication Systems: Retaining network configurations and protocols.
6. Automotive: Storing system configurations and user preferences.
Its small size and low power consumption make it ideal for embedded systems requiring reliable non-volatile memory.