Abbildungen dienen nur als Referenz
24LC1025T-I/SN
+StücklisteIC EEPROM 1MBIT I2C 400KHZ 8SOIC
-
HerstellerMikrochip-Technologie
-
Herstellerteil #24LC1025T-I/SN
-
Datenblatt 24LC1025T-I/SN DataSheet
-
Paket SOIC-8
-
Auf Lager6161
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Part Status | Active |
| Memory Type | Non-Volatile |
| Memory Format | EEPROM |
| Technology | EEPROM |
| Memory Size | 1Mb (128K x 8) |
| Memory Interface | I²C |
| Clock Frequency | 400 kHz |
| Write Cycle Time - Word Page | 5ms |
| Access Time | 900 ns |
| Voltage - Supply | 2.5V ~ 5.5V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
Übersicht
Description
Key features of the 24LC1025T-I/SN include a wide voltage operation range of 1.7V to 5.5V, allowing for compatibility with a variety of applications. It also provides low power consumption, making it suitable for battery-operated devices. The device supports a high-speed mode of up to 1 MHz for efficient data transfer.
For reliability, the EEPROM boasts over 1,000,000 erase/write cycles and more than 200 years of data retention. Its page write capability allows for writing up to 128 bytes in a single operation, which optimizes data handling. The 24LC1025T-I/SN is typically housed in an 8-pin SOIC package, making it compact and easy to integrate into electronic systems.
Equivalent
Features
Pinout
Pin Count:
The 24LC1025T-I/SN comes in an 8-pin SOIC (Small Outline Integrated Circuit) package.
Pin Functions:
1. A0, A1, A2 (Pins 1-3): Device address inputs used for multiple device selection on the I2C bus.
2. VSS (Pin 4): Ground reference for the device.
3. SDA (Pin 5): Serial Data line for bidirectional communication between the EEPROM and the microcontroller.
4. SCL (Pin 6): Serial Clock line used to synchronize data transfer on the I2C bus.
5. WP (Pin 7): Write Protect input. When connected to VCC, write operations to the EEPROM are disabled.
6. VCC (Pin 8): Power supply input for the device.
These pins facilitate communication and control of the EEPROM via the I2C protocol, allowing for data storage and retrieval in a variety of applications.
Manufacturer
Application
1. Consumer Electronics: Storing configuration parameters and user settings.
2. Industrial Control Systems: Retaining calibration data and system logs.
3. Medical Devices: Preserving patient records and device settings.
4. Automotive Systems: Maintaining vehicle configuration data and fault logs.
5. Communication Equipment: Holding firmware updates and network settings.
6. Home Appliances: Storing program settings and usage history.
These areas benefit from the EEPROM's ability to retain data without power and its compatibility with microcontroller interfacing.