24LC256-I/P

The 24LC256-I/P is a 256-Kilobit (32KB) electrically erasable programmable read-only memory (EEPROM) from Microchip Technology. It operates on a wide voltage range from 2.5V to 5.5V, making it versatile for various applications. The device uses the I2C (Inter-Integrated Circuit) bus protocol for communication, allowing multiple devices to be connected in parallel while minimizing pin usage.
Key features include a 400 kHz clock frequency for fast data transfer, up to 1 million erase/write cycles, and data retention of over 200 years. The 24LC256-I/P supports both byte-level and page-level data writing, with a page size of 64 bytes, optimizing data handling efficiency. Its DIP (Dual In-line Package) form factor makes it suitable for through-hole mounting in traditional circuit boards.
With its low-power consumption, the 24LC256-I/P is ideal for portable and battery-powered devices, data logging, and memory expansion in embedded systems. The EEPROM's reliability and durability make it a popular choice for applications requiring non-volatile memory storage.

The 24LC256-I/P is a 256Kb I2C EEPROM. Equivalent products include:
1. AT24C256 - by Atmel (now Microchip)
2. M24C256 - by STMicroelectronics
3. CAT24C256 - by ON Semiconductor
4. BR24G256 - by Rohm
5. NM24C256 - by Fairchild (now ON Semiconductor)
These alternatives offer similar storage capacity and interface compatibility, though specifics like voltage range and performance may vary. Always check datasheets for exact match to your requirements.

The 24LC256-I/P is a 256 Kbit Electrically Erasable PROM (EEPROM) with several key features:
1. Capacity: It offers 32K x 8-bit memory organization, providing a total of 32,768 bytes.
2. Interface: Utilizes an I2C (Inter-Integrated Circuit) serial interface, supporting both standard (100 kHz) and fast (400 kHz) data transfer modes.
3. Voltage Range: Operates with a wide voltage range from 2.5V to 5.5V, making it versatile for different applications.
4. Low Power Consumption: Features low standby and active current, enhancing energy efficiency.
5. Page Write Capability: Supports page write mode up to 64 bytes, which simplifies data handling.
6. Endurance and Retention: Offers high endurance with over 1 million write cycles and data retention of over 200 years.
7. Package: Available in an 8-pin PDIP package for through-hole applications.
8. Safety Features: Includes write-protect feature by hardware and software for data protection.
9. Temperature Range: Suitable for industrial applications with an operating temperature range of -40°C to +85°C.
These features make the 24LC256-I/P suitable for a variety of applications requiring reliable and flexible non-volatile memory.

The 24LC256-I/P is a 256 Kbit (32 Kbyte) I²C EEPROM manufactured by Microchip Technology. It has an 8-pin configuration and operates with a two-wire serial interface. Here are the functions of each pin:
1. A0, A1, A2 (Pins 1-3): These are address pins used to set the I²C device address, allowing up to eight 24LC256 devices on the same bus.
2. VSS (Pin 4): This is the ground pin.
3. SDA (Pin 5): The Serial Data line used for both input and output; this pin is open-drain and requires a pull-up resistor.
4. SCL (Pin 6): The Serial Clock line; this pin is used to synchronize the data transfer between the microcontroller and the EEPROM.
5. WP (Pin 7): The Write-Protect pin; when connected to VCC, write operations are disabled, providing hardware data protection.
6. VCC (Pin 8): The power supply pin, typically operating at 2.5V to 5.5V.
This configuration allows for efficient data storage and retrieval in embedded systems.

The 24LC256-I/P is manufactured by Microchip Technology Inc. Microchip Technology is a leading semiconductor company that designs and produces a wide range of microcontrollers, memory products, and analog and interface semiconductors. The company serves various markets, including automotive, industrial, consumer electronics, and telecommunications, providing solutions that enable embedded control applications. Microchip is recognized for its focus on reliability, performance, and cost-effectiveness, making it a prominent player in the semiconductor industry.

The 24LC256-I/P is a 256Kb I2C EEPROM used for non-volatile memory applications. It is commonly employed in data logging, configuration settings, and calibration storage for industrial, automotive, and consumer electronics. Its low power consumption makes it suitable for battery-powered devices, while its I2C interface ensures easy integration with microcontrollers and other digital devices. Additionally, it is used in medical devices, communication equipment, and anywhere reliable data retention is needed without continuous power.

The 24LC256-I/P is an EEPROM (Electrically Erasable Programmable Read-Only Memory) chip produced by Microchip Technology. It comes in a PDIP (Plastic Dual In-line Package) type with 8 pins. This chip offers 256 Kbit (32 Kbyte) of memory and operates on an I²C interface, making it suitable for various data storage applications.