Abbildungen dienen nur als Referenz
25LC1024T-I/SM
+StücklisteIC EEPROM 1MBIT SPI 20MHZ 8SOIJ
-
HerstellerMikrochip-Technologie
-
Herstellerteil #25LC1024T-I/SM
-
Datenblatt 25LC1024T-I/SM DataSheet
-
Paket SOP-8
-
Auf Lager6882
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Part Status | Active |
| Memory Type | Non-Volatile |
| Memory Format | EEPROM |
| Technology | EEPROM |
| Memory Size | 1Mb (128K x 8) |
| Memory Interface | SPI |
| Clock Frequency | 20 MHz |
| Write Cycle Time - Word Page | 6ms |
| Voltage - Supply | 2.5V ~ 5.5V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
Übersicht
Description
Key features of the 25LC1024T-I/SM include block write protection, sequential read capabilities, and a write protect pin to enhance data security. The device is organized into 128-byte pages, and it supports page write operations, allowing efficient data management. It operates over an industrial temperature range of -40°C to +85°C, making it ideal for various applications, including consumer electronics, industrial equipment, and automotive systems.
Packaged in an 8-lead SOIC, the 25LC1024T-I/SM is designed for reliable performance and ease of integration into embedded systems where non-volatile memory is required.
Equivalent
1. AT25M01 from Adesto Technologies
2. M95M01 from STMicroelectronics
3. SST25VF010A from Microchip Technology
4. MX25L1005 from Macronix International
These alternatives offer similar memory capacities and SPI interfaces but may vary in terms of speed, voltage ranges, and other specifications. Always verify compatibility with your specific application requirements.
Features
Key features include page-write capability of up to 256 bytes, which speeds up data programming. It also offers data retention of over 200 years and endurance of one million erase/write cycles, ensuring reliability and longevity. The 25LC1024T-I/SM includes built-in write protection via a write-protect pin and software instructions to prevent inadvertent data corruption. It is housed in an 8-lead SOIC package and is designed for industrial temperature ranges, making it suitable for various industrial and consumer applications.
Pinout
1. CS (Chip Select): Activates the device when low.
2. SO (Serial Data Out): Outputs data from the EEPROM during read operations.
3. WP (Write Protect): Disables all write operations if held high.
4. VSS: Ground reference for the device.
5. SI (Serial Data In): Inputs data to be written into the EEPROM.
6. SCK (Serial Clock): Provides the clock signal for SPI communication.
7. HOLD: Pauses the communication with the EEPROM without resetting the serial sequence.
8. VCC: Power supply for the device, typically 2.5V to 5.5V.
This EEPROM is used for non-volatile storage and allows for byte-level and page-level writes.
Manufacturer
Application
1. Consumer Electronics: Storing configuration data and user preferences.
2. Industrial Automation: Logging data and firmware storage for programmable logic controllers (PLCs).
3. Automotive: Used in infotainment systems for memory storage.
4. Medical Devices: Data logging and storage for diagnostic equipment.
5. Communication Systems: Backup storage for configuration settings.
6. Computing: Used in PCs and peripherals for BIOS storage or calibration data.
7. IoT Devices: Configuration and data logging in small, connected devices.
Its attributes of low power consumption and high endurance make it suitable for these applications.