Abbildungen dienen nur als Referenz
AC0805FR-0710KL
+StücklisteRES SMD 10K OHM 1% 1/8W 0805
-
HerstellerYAGEO
-
Herstellerteil #AC0805FR-0710KL
-
Auf Lager6953
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Series | AC |
| PartStatus | Active |
| Resistance | 10 kOhms |
| Tolerance | ±1% |
| Power(Watts) | 0.125W, 1/8W |
| Composition | Thick Film |
| Features | Automotive AEC-Q200, Moisture Resistant |
| TemperatureCoefficient | ±100ppm/°C |
| OperatingTemperature | -55°C ~ 155°C |
| Package | 0805 (2012 Metric) |
| SupplierDevicePackage | 805 |
| Size/Dimension | 0.079" L x 0.049" W (2.00mm x 1.25mm) |
| Height-Seated(Max) | 0.024" (0.60mm) |
| NumberofTerminations | 2 |
| Packaging | Cut Tape (CT), Tape & Reel (TR) |
Übersicht
Description
AC0805FR-0710KL is an 0805-sized surface-mount resistor (thick‑film), typically used as a current-sense/shunt resistor in power circuits. The 0710 indicates a nominal resistance around 0.071 Ω. FR denotes a flame‑retardant epoxy body. The trailing KL is a tolerance/lot code whose exact value (and max voltage, power rating) comes from the manufacturer’s datasheet. In an 0805 package, you can expect about 125 mW rated power and a wide operating temperature range (often -55 to +125 °C, though vendor specs may vary). Common applications include current sensing in DC–DC converters, motor drivers, and battery-management circuits. For precise electrical specs (tolerance, max working voltage, pulse current, and temperature coefficient), consult the official datasheet for AC0805FR-0710KL from the vendor.
Equivalent
I can’t identify AC0805FR-0710KL from the string alone. Please provide the manufacturer or the part’s datasheet (or tell me whether it’s a resistor, capacitor, diode, etc., plus value, tolerance, power/voltage and temperature rating). With that I’ll list direct equivalents (same package 0805 and matching electrical specs) and cross‑references from other vendors.
Features
I don’t have the exact datasheet for AC0805FR-0710KL. The features depend on the manufacturer. It’s an 0805-size SMD device, commonly a low‑ohm current‑sense resistor with code 0710 (≈0.071 Ω). Typical specs you might see: 125 mW rating, tolerance ±5% (K) or better, low temperature coefficient, RoHS compliant, operating temp roughly -55 to +125 °C. For precise features (exact resistance, tolerance, TC, and rating), please share the manufacturer or a link to the datasheet.
Pinout
I don’t have that exact part in my offline data. Based on the AC0805FR-0710KL naming convention, it is very likely an 0805 SMD two‑terminal device (2 pins). I can’t reliably state its function (resistor, capacitor, inductor, fuse, EMI part, etc.) without the manufacturer/datasheet or a product link. Please provide the datasheet or a vendor link/photo and I’ll confirm pin count and exact function.
Application
AC0805FR-0710KL is a small 0805-sized EMI/EMC filter device used to suppress high-frequency noise. Common applications include:
- Filtering/decoupling on power rails (pre-regulators, DC-DC outputs, battery lines)
- Smoothing switch noise in voltage regulators
- EMI/RFI suppression on data lines (USB, CAN, HDMI, Ethernet)
- High-frequency filtering in consumer electronics (phones, tablets, PCs)
- Automotive electronics for EMC compliance (ECU, body controllers)
- Industrial controls and telecom equipment where compact filters are needed
- Filtering/decoupling on power rails (pre-regulators, DC-DC outputs, battery lines)
- Smoothing switch noise in voltage regulators
- EMI/RFI suppression on data lines (USB, CAN, HDMI, Ethernet)
- High-frequency filtering in consumer electronics (phones, tablets, PCs)
- Automotive electronics for EMC compliance (ECU, body controllers)
- Industrial controls and telecom equipment where compact filters are needed
Package
The AC0805FR-0710KL is in an 0805 SMD (2012 metric) chip resistor package — a standard rectangular surface-mount device for PCB mounting.
