Abbildungen dienen nur als Referenz
AD5259BRMZ10
+StücklisteIC DGTL POT 10KOHM 256TAP 10MSOP
-
HerstellerAnalog Devices Inc.
-
Herstellerteil #AD5259BRMZ10
-
Datenblatt AD5259BRMZ10 DataSheet
-
Paket MSOP-10
-
Auf Lager7324
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Package / Case | Bulk,Tube |
| Part Status | Active |
| Taper | Linear |
| Configuration | Potentiometer |
| Number of Circuits | 1 |
| Number of Taps | 256 |
| Resistance(Ohms) | 10k |
| Interface | I²C |
| Memory Type | Non-Volatile |
| Voltage - Supply | 2.7V ~ 5.5V |
| Features | Selectable Address |
| Tolerance | ±30% |
| Temperature Coefficient(Typ) | 500ppm/°C |
| Mounting Type | Surface Mount |
| Supplier Device Package | 10-MSOP |
| Operating Temperature | -40°C ~ 125°C |
Übersicht
Description
Key specifications:
- Resistance: 10 kΩ
- Interface: I²C-compatible (up to 400 kHz)
- Voltage range: ±2.25V to ±2.75V (dual-supply), 2.7V to 5.5V (single-supply)
- Temperature range: -40°C to +105°C
- Package: 10-lead MSOP
Applications include programmable filters, volume control, and system tuning. Its compact size and low power consumption make it suitable for portable and industrial systems.
For detailed specs, refer to the datasheet on Analog Devices' website.
Equivalent
- MAX5400 (10kΩ, I²C interface)
- MCP4017 (10kΩ, simple digital pot)
- DS1803 (10kΩ, dual-channel)
- X9C103 (10kΩ, up/down interface)
These alternatives offer similar resistance values and digital control, though interfaces (I²C, SPI, or up/down) may vary. Check datasheets for exact compatibility.
Features
- Non-volatile memory: Retains wiper settings during power-off.
- 256-position resolution: Precise adjustment.
- I²C-compatible interface: Simple digital control.
- Single-supply operation: 2.7 V to 5.5 V.
- Low power consumption: 6 μA (max) in active mode, 400 nA (typ) in shutdown.
- Small package: 10-lead MSOP for space-constrained designs.
- Wide temperature range: -40°C to +125°C.
Ideal for volume control, calibration, and programmable voltage references.
Pinout
Pin Functions:
1. VDD – Power supply (2.7V to 5.5V).
2. GND – Ground.
3. SCL – I²C serial clock input.
4. SDA – I²C bidirectional data.
5. A, B, W – Potentiometer terminals (A: fixed end, B: fixed end, W: wiper).
6. WP – Write-protect input (active low).
7. AD0 – I²C address select.
It provides nonvolatile memory for wiper settings and supports I²C interface for control. Used in volume control, calibration, and programmable resistors.
