Abbildungen dienen nur als Referenz

AD584SH/883B

+Stückliste

IC VREF SERIES 0.3% TO99

HerstellerAnalog Devices Inc.
Herstellerteil #AD584SH/883B
Datenblatt AD584SH/883B DataSheet
Paket TO-99
Auf Lager5603

365 Tage Qualitätsgarantie

7*24 Stunden-Servicegarantie

90-Tage Kundendienstgarantie

Originalproduktgarantie

Spezifikationen

Attribut	Wert
Package	Bulk,Tube
Series	Military, MIL-STD-883
ProductStatus	Active
ReferenceType	Series
OutputType	Programmable
Voltage-Output(Min/Fixed)	2.5V, 5V, 7.5V, 10V
Current-Output	10 mA
Tolerance	±0.3%
TemperatureCoefficient	30ppm/°C
Noise-01Hzto10Hz	50µVp-p
Voltage-Input	4.5V ~ 30V
Current-Supply	1mA
OperatingTemperature	-55°C ~ 125°C
MountingType	Through Hole
Package/Case	TO-99-8 Metal Can

Übersicht

Description

AD584SH/883B is Analog Devices’ 12‑bit multiplying DAC (MDAC) with a current output. It converts a digital word into a current proportional to the product of the input code and an external reference voltage.
Key points
- The SH/883B suffix indicates device revision/package/lot for this part.
- Operation: apply Vref to Vref input; drive the 12‑bit input with TTL/CMOS data; Iout is the output current you convert to voltage with a resistor or op‑amp.
- Features: monotonic 12‑bit performance, full‑scale current set by Vref, suitable for single or dual supply, good temperature stability and fast settling.
- Applications: precision signal generation, DAC‑based control loops, waveform generation, and analog computation.
- Design notes: keep Vref clean, provide proper decoupling, and sense Iout with a high‑impedance load or an op‑amp for downstream circuitry or ADCs.

Equivalent

There isn’t an exact one‑to‑one cross for AD584SH/883B. To find substitutes, please provide: resolution (bits), output type (voltage/current), output range, supply rails, reference, temperature, and package. With those, I can suggest concrete equivalents from Analog Devices, TI/Burr‑Brown, and Intersil. You can also use vendor cross-reference tools for precise matches.

Features

AD584SH/883B features (concise):
- 12-bit multiplying DAC with current output (Iout)
- External reference input (IREF) sets full-scale current; Iout ≈ (Code/4095) × IREF
- Monotonic over the full code range and operating temperature
- Requires external op-amp to convert Iout to a voltage
- Wide supply range suitable for single or dual supplies
- SH/883B packaging (16-pin) for standard PCB integration
- Ideal for precision calibration, closed-loop control, and V→I conversion
- Designed for high accuracy with good temperature stability and low drift
Note: Exact electrical specs (e.g., IREF range, voltage ranges, temperature range) are in the datasheet; consult it for precise values.

Pinout

Pin count: 8 pins (SO-8/DIP-8).
Function: 12‑bit multiplying DAC with current output. Converts a digital input word into a proportional output current (Iout) that is set by a reference (Vref). Requires an external op-amp to convert Iout to a voltage; used for multiplying DAC applications with dual/single supplies as specified in the datasheet.

Manufacturer

- Manufacturer: Analog Devices, Inc. (ADI).
- What kind of company: A multinational American semiconductor company that designs and manufactures analog, mixed-signal, and digital signal processing integrated circuits.

Application

AD584SH/883B are multiplying DACs with current output. Typical applications:
- Programmable current sources and precision gain elements in instrumentation, process control, and servo/motor drives
- Analog signal generation for test equipment, calibration signals, and waveform synthesis
- Transducer interfaces and current-to-voltage conversion in data-acquisition front-ends
- Analog computing blocks (multiplying/dividing networks) with external op-amps
- Calibration/offset adjustments and programmable gains in instrumentation and measurement systems
Note: SH/883B denote variants suitable for industrial/precision use.

Package

AD584SH/883B is in a 16-pin DIP (DIL) package.