Abbildungen dienen nur als Referenz
IC INST AMP 1 CIRCUIT 8DIP
-
HerstellerAnalog Devices Inc.
-
Herstellerteil #AD620BNZ
-
Auf Lager7003
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Part Status | Active |
| Amplifier Type | Instrumentation |
| Number of Circuits | 1 |
| Slew Rate | 1.2V/µs |
| -3 dB Bandwidth | 1 MHz |
| Current - Input Bias | 500 pA |
| Voltage - Input Offset | 15 µV |
| Supply Current | 900µA |
| Current - Output / Channel | 18 mA |
| Voltage - Supply Span (Min) | 4.6 V |
| Voltage - Supply Span (Max) | 36 V |
| Operating Temperature | -40°C ~ 85°C |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300", 7.62mm) |
| Supplier Device Package | 8-PDIP |
| Base Product Number | AD620 |
Übersicht
Description
Key features include a wide power supply range from ±2.3V to ±18V, low power consumption (1.3 mA typical), and a gain range of 1 to 1000, adjustable via a single external resistor. Its low input offset voltage and drift ensure accurate signal processing, and its high input impedance minimizes loading effects on the signal source.
The AD620BNZ is often used in medical instrumentation, industrial process controls, and sensor signal conditioning due to its ability to amplify low-level signals while rejecting noise and interference. Its robust performance and cost-effectiveness make it a popular choice for applications requiring precise analog signal amplification.
Equivalent
1. INA128 by Texas Instruments – Similar performance with low power and low noise.
2. MAX4194 by Maxim Integrated – Offers low-noise and precision specs.
3. LT1167 by Analog Devices – Provides precision with low power consumption.
4. MCP6N11 by Microchip – A cost-effective option with good performance.
These alternatives may vary in specific parameters, so reviewing datasheets for compatibility with your application is recommended.
Features
Pinout
1. Pin 1 (RG): Gain setting resistor pin. Connecting a resistor between Pin 1 and Pin 8 sets the gain.
2. Pin 2 (V- or -Vs): Negative power supply voltage.
3. Pin 3 (Vin- or IN-): Inverting input.
4. Pin 4 (Ref): Reference voltage input. Used to set the output reference level.
5. Pin 5 (Vout): Output voltage.
6. Pin 6 (Vin+ or IN+): Non-inverting input.
7. Pin 7 (V+ or +Vs): Positive power supply voltage.
8. Pin 8 (RG): Gain setting resistor pin. Works with Pin 1 to determine the gain.
The AD620 is widely used for its high accuracy, low noise, and low power consumption. It's suitable for applications requiring precise low-level signal amplification, such as medical instrumentation and data acquisition systems.
Manufacturer
Application
1. Medical Instrumentation: Used in ECG and EEG equipment for accurate biopotential measurements.
2. Industrial Process Controls: Utilized for sensor signal amplification in pressure, temperature, and flow measurements.
3. Weigh Scales: Enhances precision in load cell and strain gauge applications.
4. Data Acquisition: Improves signal fidelity in analog-to-digital converter systems.
5. Transducer Interface: Used in interfacing various types of sensors to electronic systems.
6. Portable Instruments: Employed in battery-powered devices due to its low power requirement.
These applications benefit from its high accuracy, low noise, and ease of use.