Abbildungen dienen nur als Referenz
28-LGA-6X6_MM MODULE/SIP
-
HerstellerAnalog Devices Inc.
-
Herstellerteil #ADL8111ACCZN-R7
-
Datenblatt ADL8111ACCZN-R7 DataSheet
-
Paket LFLGA-28
-
Auf Lager3949
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Supplier | Analog Devices Inc. |
| Package / Case | Tape & Reel (TR) |
| Part Status | Active |
| Frequency | 10MHz ~ 8GHz |
| P1d B | 19.5dBm |
| Gain | 11.5dB |
| Noise Figure | 4.5dB |
| RF Type | General Purpose |
| Voltage - Supply | 3V ~ 5.5V |
| Supply Current | 70mA |
| Test Frequency | 10MHz ~ 5GHz |
| Mounting Type | Surface Mount |
Übersicht
Description
The ADL8111ACCZN-R7 is characterized by its compact design, which facilitates integration into small form factor designs. Its robust performance results from a combination of advanced semiconductor technology and innovative circuit design. This amplifier is typically housed in a surface-mount package, allowing for easy installation and reliable thermal performance.
Furthermore, the ADL8111ACCZN-R7 supports a wide input voltage range and is designed to operate efficiently under various environmental conditions, which enhances its applicability in industrial and commercial settings. It provides engineers with a reliable solution for optimizing signal reception and transmission in high-frequency electronic systems.
Equivalent
1. Qorvo's TQL9092
2. Mini-Circuits' PHA-1+
3. MACOM's MAAL-011111
These alternatives vary slightly in specifications, so it is essential to review their datasheets to ensure compatibility with your application.
Features
1. Frequency Range: It operates over a wide frequency range from 1 MHz to 6 GHz, making it versatile for various applications.
2. Gain: The amplifier offers a typical gain of 15 dB, providing substantial signal amplification.
3. Output Power: It delivers a typical output power of 19 dBm at 1 dB compression point, suitable for driving loads effectively.
4. Noise Figure: The low noise figure of approximately 3 dB ensures minimal signal degradation, which is critical for maintaining high signal integrity.
5. Supply Voltage and Current: It operates with a supply voltage of 5V, drawing a typical current of around 91 mA.
6. Packaging: The component comes in a 2mm x 2mm LFCSP package, which is compact and suitable for space-constrained applications.
7. Applications: Ideal for use in wireless infrastructure, broadband communications, and other RF and microwave applications.
8. Stability and Robustness: The design ensures stable performance across various conditions and parameters.
These features make the ADL8111ACCZN-R7 suitable for a range of RF applications requiring high performance and reliability.
Pinout
The device features a pin count of 6, with each pin serving specific functions as follows:
1. RF Input: Connects to the signal source.
2. Ground (GND): Provides a connection to ground for proper device operation.
3. Ground (GND): Additional ground connection.
4. RF Output/Vcc: This pin functions both as the RF output and provides the power supply to the amplifier.
5. Ground (GND): Further grounding.
6. Ground (GND): Additional grounding for stability.
The combination of input, output, and multiple ground pins ensures optimal performance, stability, and minimal noise in high-frequency amplification applications.
Manufacturer
Application
1. Wireless infrastructure, such as base stations and repeaters.
2. Cellular networks, including 5G technology.
3. Satellite communications, for both ground stations and on-board systems.
4. Test and measurement equipment requiring high-frequency amplification.
5. Defense and aerospace, including radar and electronic warfare systems.
6. Broadband and high-speed data communication systems.
These applications benefit from the amplifier's wide frequency range and low noise figure, which enhance signal integrity and performance.