AR0141CS2M00SUEA0-DPBR

AR0141CS2M00SUEA0-DPBR is a specific ON Semiconductor (Aptina) variant of the AR0141 CMOS image sensor. The AR0141 family is a 1/4-inch, high-sensitivity, low-noise rolling‑shutter sensor in the 1.2–1.3 MP range, intended for machine-vision and automotive/industrial cameras. It supports configurable exposure and gain, region-of-interest, and various output interfaces depending on the revision. The trailing code (CS2M00SUEA0-DPBR) encodes the packaging/revision and related options for this particular part variant. For exact specifications—pixel size, frame rate, power rails, I/O interface, and timing—refer to the AR0141 datasheet and packaging guide on ON Semiconductor’s website.

AR0141CS2M00SUEA0-DPBR features (concise):
- 1.0 MP CMOS image sensor in 1/4" optical format (1280×960 active pixels)
- Rolling shutter readout
- On-chip 12-bit ADC
- Programmable exposure, gain, frame rate; ROI/windowing and binning options
- On-chip image processing: fixed-pattern noise reduction, lens shading correction, defective-pixel correction
- Color/mono variants with standard color correction paths
- Output interfaces: LVDS (multi-lane) and/or parallel digital options
- Low power operation with multiple supply rails and standby modes
- Wide operating temperature range (industrial/automotive options available)
- Compact packaging (small CSP/LCC form factor) suitable for machine vision and embedded apps
Note: exact specs (fps, pixel size, interfaces) vary by revision; consult the current datasheet for precise numbers.

Pin count: 28 pins (CS2M00SUEA0-DPBR package).
Function: Provides multi-signal I/O for the AR0141 sensor — LVDS image data outputs (data channels), LVDS clock, frame/line valid signals, I2C control interface (SCL/SDA) for register access, MCLK input, reset/power-down, and multiple power/ground pins (AVDD, DVDD, IOVDD, GND).

- Manufacturer: ON Semiconductor (ON Semiconductor Corp.). The AR0141 sensor was originally from Aptina Imaging and is now manufactured by ON Semiconductor.
- What kind of company: A global semiconductor company that designs and manufactures energy-efficient components, including CMOS image sensors for automotive, industrial, and consumer markets.

AR0141CS2M00SUEA0-DPBR is used in:
- Industrial machine vision and quality inspection (defect detection, measurements, OCR, barcodes)
- Embedded/edge vision for robotics and automation (pick-and-place, navigation, pose estimation)
- Surveillance and security cameras (IP cameras, video analytics)
- Drones and unmanned imaging (aerial inspection, mapping)
- Smart cameras and AI-enabled IoT devices (edge AI vision applications)

Chip-scale package (CSP), specifically the DPBR variant.