Abbildungen dienen nur als Referenz
AT24C01D-SSHM-T
+StücklisteIC EEPROM 1KBIT I2C 1MHZ 8SOIC
-
HerstellerMikrochip-Technologie
-
Herstellerteil #AT24C01D-SSHM-T
-
Auf Lager8772
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Part Status | Active |
| Digi Key Programmable | Verified |
| Memory Type | Non-Volatile |
| Memory Format | EEPROM |
| Technology | EEPROM |
| Memory Size | 1Kbit |
| Memory Organization | 128 x 8 |
| Memory Interface | I2C |
| Clock Frequency | 1 MHz |
| Write Cycle Time - Word, Page | 5ms |
| Access Time | 4.5 µs |
| Voltage - Supply | 1.7V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C (TC) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154", 3.90mm Width) |
| Supplier Device Package | 8-SOIC |
| Base Product Number | AT24C01 |
Übersicht
Description
The AT24C01D-SSHM-T is a 1K-bit (128 x 8) EEPROM (Electrically Erasable Programmable Read-Only Memory) device from Microchip Technology. It uses I2C (Inter-Integrated Circuit) protocol for communication, allowing multiple devices to be connected on a two-wire bus. This EEPROM features a 1.8V to 5.5V operating voltage range, making it suitable for low-power applications.
Key features include a maximum clock frequency of 1 MHz and the ability to perform page writes up to 16 bytes. The device is designed for data retention of 100 years and supports up to 1 million write/erase cycles, providing reliability for data storage. The AT24C01D-SSHM-T is packaged in an 8-pin SOIC (Small Outline Integrated Circuit) form factor, which is ideal for space-constrained applications.
Overall, it is commonly used in consumer electronics, automotive, and industrial applications for storing configuration settings, calibration data, and other non-volatile information.
Key features include a maximum clock frequency of 1 MHz and the ability to perform page writes up to 16 bytes. The device is designed for data retention of 100 years and supports up to 1 million write/erase cycles, providing reliability for data storage. The AT24C01D-SSHM-T is packaged in an 8-pin SOIC (Small Outline Integrated Circuit) form factor, which is ideal for space-constrained applications.
Overall, it is commonly used in consumer electronics, automotive, and industrial applications for storing configuration settings, calibration data, and other non-volatile information.
Equivalent
The AT24C01D-SSHM-T is a 1Kb I2C EEPROM. Equivalent products include:
1. 24C01 from Microchip Technology
2. M24C01 from STMicroelectronics
3. 93C56 from Microchip Technology (though it uses a different protocol)
4. AT24C01 from Atmel (same family).
Always check the specific requirements like voltage, pin configuration, and speed when selecting equivalents.
1. 24C01 from Microchip Technology
2. M24C01 from STMicroelectronics
3. 93C56 from Microchip Technology (though it uses a different protocol)
4. AT24C01 from Atmel (same family).
Always check the specific requirements like voltage, pin configuration, and speed when selecting equivalents.
Features
The AT24C01D-SSHM-T is a 1K-bit (128 x 8) I2C EEPROM from Microchip Technology. Key features include:
1. Memory Organization: 128 x 8-bit configuration.
2. Interface: I2C compatible, supporting multiple devices on the same bus.
3. Operating Voltage: Typically operates between 1.7V to 5.5V.
4. Data Rate: Supports standard mode (up to 100 kHz) and fast mode (up to 400 kHz).
5. Write Endurance: Capable of withstanding up to 1 million write cycles per memory location.
6. Data Retention: Guaranteed data retention for up to 100 years at 25°C.
7. Package Options: Available in various compact packages, including SOIC and TSSOP.
8. Low Power Consumption: Suitable for battery-operated devices due to low active and standby currents.
These features make the AT24C01D-SSHM-T ideal for applications requiring non-volatile memory, such as consumer electronics, automotive systems, and industrial applications.
1. Memory Organization: 128 x 8-bit configuration.
2. Interface: I2C compatible, supporting multiple devices on the same bus.
3. Operating Voltage: Typically operates between 1.7V to 5.5V.
4. Data Rate: Supports standard mode (up to 100 kHz) and fast mode (up to 400 kHz).
5. Write Endurance: Capable of withstanding up to 1 million write cycles per memory location.
6. Data Retention: Guaranteed data retention for up to 100 years at 25°C.
7. Package Options: Available in various compact packages, including SOIC and TSSOP.
8. Low Power Consumption: Suitable for battery-operated devices due to low active and standby currents.
These features make the AT24C01D-SSHM-T ideal for applications requiring non-volatile memory, such as consumer electronics, automotive systems, and industrial applications.
Pinout
The AT24C01D-SSHM-T is an EEPROM (Electrically Erasable Programmable Read-Only Memory) device with a total of 8 pins. The pin configuration and their functions are as follows:
1. VCC: Supply voltage (typically 1.8V to 5.5V).
2. GND: Ground reference.
3. SDA: Serial Data Line for data transfer.
4. SCL: Serial Clock Line for synchronization of data transmission.
5. WP: Write Protect; when connected to VCC, it prevents writing to the memory.
6. A0: Address pin, used to set the lower order address bits for multiple devices on the same bus.
7. A1: Another address pin for device addressing.
8. A2: A third address pin for additional device addressing.
The AT24C01D-SSHM-T is commonly used in applications requiring non-volatile data storage, such as configuration settings and calibration data. It operates on the I²C communication protocol.
1. VCC: Supply voltage (typically 1.8V to 5.5V).
2. GND: Ground reference.
3. SDA: Serial Data Line for data transfer.
4. SCL: Serial Clock Line for synchronization of data transmission.
5. WP: Write Protect; when connected to VCC, it prevents writing to the memory.
6. A0: Address pin, used to set the lower order address bits for multiple devices on the same bus.
7. A1: Another address pin for device addressing.
8. A2: A third address pin for additional device addressing.
The AT24C01D-SSHM-T is commonly used in applications requiring non-volatile data storage, such as configuration settings and calibration data. It operates on the I²C communication protocol.
Manufacturer
The manufacturer of the AT24C01D-SSHM-T is Microchip Technology Inc. Microchip is a leading provider of microcontroller and analog semiconductors, offering a wide range of products including memory devices, microcontrollers, and various integrated circuits. Founded in 1989 and headquartered in Chandler, Arizona, Microchip serves diverse markets such as automotive, industrial, consumer, and communication.
The AT24C01D-SSHM-T is an EEPROM (Electrically Erasable Programmable Read-Only Memory) device, featuring a 1 Kbit memory capacity and I2C interface for easy integration into electronic circuits. Microchip emphasizes innovation and quality in its product offerings, resulting in a strong reputation within the semiconductor industry. The company also provides design support and development tools to assist engineers in creating effective solutions using their products.
The AT24C01D-SSHM-T is an EEPROM (Electrically Erasable Programmable Read-Only Memory) device, featuring a 1 Kbit memory capacity and I2C interface for easy integration into electronic circuits. Microchip emphasizes innovation and quality in its product offerings, resulting in a strong reputation within the semiconductor industry. The company also provides design support and development tools to assist engineers in creating effective solutions using their products.
Application
The AT24C01D-SSHM-T is a 1K-bit EEPROM (Electrically Erasable Programmable Read-Only Memory) used in various application areas, including:
1. Data Storage: For non-volatile data storage in embedded systems.
2. Configuration Settings: Storing device configurations and calibration parameters in consumer electronics.
3. Microcontroller Interface: Used in microcontrollers for data retention after power loss.
4. Industrial Automation: In sensors and control systems for storing operational data.
5. Smart Cards: For secure data storage in identity and payment applications.
6. Telecommunications: In network equipment for storing configuration data.
Its I2C interface makes it suitable for various low-speed applications.
1. Data Storage: For non-volatile data storage in embedded systems.
2. Configuration Settings: Storing device configurations and calibration parameters in consumer electronics.
3. Microcontroller Interface: Used in microcontrollers for data retention after power loss.
4. Industrial Automation: In sensors and control systems for storing operational data.
5. Smart Cards: For secure data storage in identity and payment applications.
6. Telecommunications: In network equipment for storing configuration data.
Its I2C interface makes it suitable for various low-speed applications.
Package
The AT24C01D-SSHM-T is packaged in an 8-lead MSOP (Mini Small Outline Package). This compact surface-mount package is designed for low-power applications and is suitable for placement on printed circuit boards.
