Abbildungen dienen nur als Referenz
AT24C04BN-SH-T
+StücklisteIC EEPROM 4KBIT I2C 1MHZ 8SOIC
-
HerstellerMikrochip-Technologie
-
Herstellerteil #AT24C04BN-SH-T
-
Paket SOIC-8
-
Auf Lager2768
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Package / Case | Tape & Reel (TR) |
| Part Status | Obsolete |
| Memory Type | Non-Volatile |
| Memory Format | EEPROM |
| Technology | EEPROM |
| Memory Size | 4Kb (512 x 8) |
| Memory Interface | I²C |
| Clock Frequency | 1 MHz |
| Write Cycle Time - Word Page | 5ms |
| Access Time | 550 ns |
| Voltage - Supply | 1.8V ~ 5.5V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
Übersicht
Description
Key features include byte-level and page-level write capabilities, with a page size of 16 bytes, allowing efficient data management. The AT24C04BN-SH-T supports a maximum clock frequency of 1 MHz in Fast-mode Plus, ensuring quick read/write operations. Its low-power consumption, both in active and standby modes, makes it suitable for battery-operated devices.
The component comes in a variety of package options, including SOIC (Small Outline Integrated Circuit) and TSSOP (Thin Shrink Small Outline Package), providing flexibility for different design requirements. Its reliability and performance make it ideal for a wide range of applications, such as consumer electronics, industrial controls, and automotive systems.
Equivalent
1. 24LC04B from Microchip Technology
2. M24C04-WMN6TP from STMicroelectronics
3. CAT24C04 from ON Semiconductor
4. BR24G04FJ-3 from ROHM Semiconductor
These alternatives offer similar memory size, I2C interface, and operational characteristics. Always verify pin configurations and electrical specifications for compatibility in your application.
Pinout
1. A0, A1, A2 (Pins 1-3): These are address pins used to select the specific device when multiple EEPROMs are connected on the same I2C bus.
2. GND (Pin 4): Ground reference for the power supply.
3. SDA (Pin 5): Serial Data line, used for both input and output of data. It is a bidirectional line.
4. SCL (Pin 6): Serial Clock line, used to synchronize the data transfer between the EEPROM and the microcontroller.
5. WP (Pin 7): Write Protect pin, used to protect the EEPROM from write operations when connected to high logic level.
6. VCC (Pin 8): Supply voltage for the chip, typically between 1.7V to 5.5V.
This EEPROM operates over an I2C bus, making it suitable for various applications requiring non-volatile data storage.