Abbildungen dienen nur als Referenz
IC FLASH 1MBIT SPI 20MHZ 8SOIC
-
HerstellerMikrochip-Technologie
-
Herstellerteil #AT25F1024N-10SI-2.7
-
Datenblatt AT25F1024N-10SI-2.7 DataSheet
-
Paket SOIC-8
-
Auf Lager2488
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Package / Case | Tube |
| Part Status | Obsolete |
| Memory Type | Non-Volatile |
| Memory Format | FLASH |
| Technology | FLASH |
| Memory Size | 1Mb (128K x 8) |
| Memory Interface | SPI |
| Clock Frequency | 20 MHz |
| Write Cycle Time - Word Page | 100µs |
| Voltage - Supply | 2.7V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C (TC) |
| Mounting Type | Surface Mount |
Übersicht
Description
Key features include a Serial Peripheral Interface (SPI) for easy integration with microcontrollers, fast read and write operations, and a page-programming capability that enhances speed and efficiency. It supports advanced security features like block write protection, ensuring data integrity and preventing unauthorized access.
The AT25F1024N-10SI-2.7 is ideal for applications such as consumer electronics, industrial systems, and automotive electronics, where compact size and energy efficiency are crucial. Its compact 8-pin SOIC package allows for easy incorporation into various circuit designs. The device is also known for its high endurance and reliability, with a wide operating temperature range suitable for diverse environmental conditions.
Equivalent
1. Winbond W25X10A - 1 Mbit SPI Flash Memory
2. Macronix MX25V1024 - 1 Mbit SPI Flash Memory
3. SST25LF010A - 1 Mbit SPI Serial Flash Memory
4. Microchip SST26VF016B - 16 Mbit SPI Flash (Higher density, similar family)
When selecting an equivalent, ensure compatibility with voltage, speed, and pin configuration.
Features
1. Capacity: 1 Mbit (128 KB) of memory.
2. Voltage Range: Operates with a supply voltage ranging from 2.7V to 3.6V.
3. Interface: Utilizes an SPI (Serial Peripheral Interface) for communication.
4. Speed: Supports a clock frequency of up to 10 MHz, ensuring fast data access.
5. Architecture: Organized in 512 pages of 256 bytes each, allowing efficient data management.
6. Endurance: Offers over 100,000 write/erase cycles per sector, providing longevity and reliability.
7. Data Retention: Ensures data retention for up to 20 years.
8. Security: Features hardware and software protection modes to prevent unauthorized data modification.
9. Package Type: Available in an 8-pin SOIC package, making it suitable for various circuit board layouts.
10. Temperature Range: Operates between -40°C to +85°C, suitable for industrial applications.
This combination of features makes the AT25F1024N-10SI-2.7 ideal for applications requiring reliable non-volatile storage with quick data access.
Pinout
1. CS (Chip Select): Activates the device when pulled low.
2. SO (Serial Data Out): Outputs data from the device.
3. WP (Write Protect): Protects certain sections from being written to, depending on the configuration.
4. GND: Ground reference.
5. SI (Serial Data In): Inputs data to the device.
6. SCK (Serial Clock): Provides the clock signal for data communication.
7. HOLD: Pauses any serial communication with the device without resetting the serial sequence.
8. VCC: Power supply input.
These pins enable the device to interface with microcontrollers and other digital systems using an SPI (Serial Peripheral Interface) protocol, which is used for reading, writing, and erasing the memory.
Manufacturer
Atmel was known for its innovative solutions and has been a significant contributor to the development of microcontroller technology. The company's products are often used in embedded systems, which are computer systems that perform dedicated functions within larger mechanical or electrical systems.
In 2016, Atmel was acquired by Microchip Technology, another prominent semiconductor manufacturer. This acquisition aimed to enhance Microchip's product portfolio and expand its market reach. As a result, products originally developed by Atmel, including the AT25F1024N-10SI-2.7, are now under the Microchip brand.
Application
1. Embedded Systems: Used for firmware storage to support microcontrollers and processors.
2. Consumer Electronics: Utilized in devices like cameras and music players for storing configuration data.
3. Industrial Automation: Employed for logging and storing operational parameters.
4. Networking Equipment: Used to store firmware and configuration settings in routers and switches.
5. Medical Devices: Applied in devices requiring reliable and secure data storage.
These applications benefit from its low power consumption, fast read/write capabilities, and small form factor.